Tender For Arc For Fabrication Of Various Line Materials (Items) For All Sdn In Petlad Store Under Petlad (O ... in India

Work Detail

Arc For Fabrication Of Various Line Materials (Items) For All Sdn In Petlad Store Under Petlad (O&M) Division-9' T.C.D.P.Set from 65x65x6 mm, M.S. Angle (1set = 8 Nos. 9ft Angles + 2nos. 2ft. Angles + 2 nos 4'.6" bracing Angle) 9' T.C.D.P.Set from 65x65x6MM/50X50X6MM, M.S. Angle (1set = 6 Nos. 9ft Angles of 65X65X6MM +2nos. 9ft.Angles & 2nos. 2ft.Angles of 50x50x6mm +2 nos 4'.6" bracing Angle 50x50x6 mm 9' T.C.D.P.Set from 100*50*6 M.S.CHANEL/65x65x6 Mm angle(1set 4 Nos 9ft. Angle, Top Botom 4 Nos. channel & 2 Nos.2ft. of Angle + 2 nos 4'.6" bracing Angle) 9' T.C.D.P.Set from 100*50*6 M.S.CHANEL/ 65x65x6Mm/50x50x6mm angle(1set = 2 Nos 9ft. Angle of 65x65x6mm, Top Botom 4 Nos. channel, 2nos. 9ft.Angles & 2nos. 2ft.Angles of 50x50x6mm + 2 nos 4'.6" bracing Angle 50x50x6 mm) Plain DO/DP Set 9 Feet from MS Angle 65x65x6 mm (1 set = 4 Nos. Angle) 9/11 M.S.Angie, with12 holes from 65X65X6mm 9' M.S.Angle Bracing from 50X50X6mm 2' M.S.Angle, with 09 holes from 65X65X6mm 2.6" M.S.Angle, with 09 holes & for HT ABC from 65X65X6mm Tapping Angle 4.6" (With 8 hols) HT Garding Angle from 65X65X6mm Tapping Channel 4.6" (With 8 hols) Anchor Rod from 16 mm2 M.S. Round Bar & 65x 65x 6 MM M.S. Angle Turn Buckle from 16 mm2 M.S. Round Bar & 65x 65x 6 MM M.S. Angle Eye Bolt with two nuts from 16 mm 2 M.S. Round Bar (Nut supplied by Contractor) 11 KV Top Fitting From M.S.Angle 65x 65x6 mm U-Clamp from M.S. Flat of 50 x 6 mm Side Clamp for PSC Pole from MS Flat of 50° 6 mm Side Clamp for RSJ Pole from MS Flat of 50° 6 mm Side Clamp for PSC Pole from MS Flat of 50° 6 mm "12 Inch Side Clamp for Steel Tubular Pole size 4 1/2". 5 1/2" & 6 1/2" round Stay Clamp for PSC Pole from M.S. Flat of 50x 6 MM Stay Clamp for RSJ Pole from M.S. Flat of 50x 6 MM Stay Clamp for Steel Tubular Pole size 4 1/2". 5 1/2" & 6 1/2" round Stay Clamp for HT AB Cable for PSC Pole from M.S. Flat of 50x 6 MM Stay Clamp for HT AB Cable for RSJ Pole from M.S. Flat of 50x 6 MM 11KV V-Cross Arm from M.S.Angle of 65x 65x 6 MM Extension V Cross Arm (V Cross Arm 5 Feet MS Angle/ Chanel Stay Pair/Top Fitting) Extension of Girders from 9 meter to 11. Extension of Girders from 9 meter to 13 meter Three Hole patties Top Channel 9 feet 100x50x6 mm with 14 Nos.hole. Bottom Channel 9 feet 100x50x6 mm with 14 Nos.hole. C Formation LT-5W(MS Angle 50x50x6 mm) MS Round Clamp 3' side (MS Flat 50x6 mm) Earthing Coil for Consumer from GI Wire -8 SWG Earthing Coil for Pole from GI Wire -8 SWG Earthing Coil for 9 Mtr. RSJ from Gl Wire -8 SWG Earthing Coil for 11 Mtr. RSJ from GI Wire -8 SWG etc

Contact Information