Tender For Estimate For Providing An Additional 25 Kva Xmer At Village Sila Under Bhitarwardc in India

Work Detail

Tender For Estimate For Providing An Additional 25 Kva Xmer At Village Sila Under Bhitarwardc= 1 One Km. L.T. LINES 3 PHASE 5 WIRE ON PCC 8 M USING 1100 Volts Grade A.B. Cable 3 X35+1x16+1x35 Sq.mm. XLPE WITH MAXIMUM SPAN OF 50 METERS 2 140 Kg.,8.0 Mtrs. long PCC pole 3 LT A.B Cable tension clamps (Galvanized) 4 LT A B cable Suspension clamps (Galvanized) 5 Clamps for neutral for AB Cable 6 Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) 7 Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) 8 Stay set complete without Stay wire 16 mm. (Painted) 9 STAY WIRE 7/3.15 MM.(7/10 SWG) 10 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 11 Stay Insulators 90X65mm 12 Back filling of poles with boulders. 13 Stone Block/Pre cast block for base pedding(450X450X75MM) 14 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 15 M.S.Nuts with Bolts 16 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 17 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 18 Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 19 Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector- 20 LT XLPE Air Bunch cable 3x35 sq. mm+1x35 sq.mm.insulated neutral cum messenger +1x16 sq.mm street light phase, 1100 Volts 21 11/0.4 KV, 63 KVA OUT DOOR SUB-STATION (ON 200 Kg, 9 M PCC POLE ) 22 Galvanized nut & bolt with washer 23 200 Kg., 9 Mtrs. long PCC pole 24 D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel 25 11 KV(45KN) Composite Polymer Disc Insulators 26 11 KV Strain hardware (T&C type) fittings 27 11 KV D.O. Fuse Unit Polymer type 28 9 KV Gapless type ( 5KA) Polymer for DTR 29 Transformer mounting Channel (100X50x6 mm.) 30 Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 31 Stay set complete without Stay wire 16 mm. (Painted) 32 STAY WIRE 7/3.15 MM.(7/10 SWG) 33 Stay Insulators 90X65mm 34 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 35 Stone Block/Pre cast block for base pedding(450X450X75MM) 36 Concreting of structures & foundation (1:3:6) 37 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 38 Complete jumpering of DTR 39 Danger Boards Enamelled 11 KV 40 Bi-metallic clamps Distribution Transformers Bushing 41 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 42 Red oxide paint 43 Aluminium paint 44 M.S.Nuts with Bolts 45 D.O.Mounting Channel 75x40x6mm 46 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 47 L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.) 48 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 49 G.I. STRIP 25X3 MM1 50 G.I.Pipe 40 mm Dia C grade type 51 Bentonite compound powder 52 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 53 DTR 11/0.4 KV BIS Level-III Conventional 25 KVA 54 XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts 55 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 56 1 KM OF 11 KV LINE ON 200 KG 9 Mtr PCC Pole Using Raccoon Conductor maximum Span 70 Mtrs IN RURAL AREA 57 200 Kg., 9 Mtrs. long PCC pole 58 11 KV V cross arm 65X65X6 mm. angle type 59 Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) 60 11 KV Top clamp 65X65X6 mm. angle type 61 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 62 11 KV Pin Insulator Polymer Composit (5 KN) 63 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 64 Stay set complete without Stay wire 16 mm. (Painted) 65 STAY WIRE 7/3.15 MM.(7/10 SWG) 66 Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) 67 Stay Insulators 90X65mm 68 Back filling of poles with boulders. 69 G.I. WIRES 4.0 MM. (8 SWG) 70 Stone Block/Pre cast block for base pedding(450X450X75MM) 71 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 72 Red oxide paint 73 Aluminium paint 74 Danger Boards Enamelled 11 KV 75 Aluminium Binding wire and tape 76 M.S.Nuts with Bolts 77 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 78 Schedule for 11 KV Single Pole Cut Point in 8 M PCC pole for Straight Line & angle upto 45 degree for Urban Area 79 11 KV Single pole cut point fitting 100x50x6 mm channel 80 11 KV Pin Insulator Polymer Composit (5 KN) 81 11 KV(45KN) Composite Polymer Disc Insulators 82 11 KV Strain hardware (T&C type) fittings 83 MS strain plate 65x8mm 250mm long 84 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 85 Stay set 20 mm. complete without Stay wire (Painted) 86 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 87 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 88 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 89 Stone Block/Pre cast block for base pedding(450X450X75MM) 90 Back filling of poles with boulders. 91 Concreting of structures & foundation (1:3:6) 92 Red oxide paint 93 Aluminium paint 94 M.S.Nuts with Bolts 95 Danger Boards Enamelled 33 KV 96 200 Kg., 9 Mtrs. long PCC pole 97 Other Charges 98 TOTAL COST WITHOUT GST 99 GST

Contact Information