Tenders Are Invited For Building Construction Work – New Construction Of A Bus Depot in Germany

Work Detail

Building Construction Work – New Construction Of A Bus Depot. The Measure Includes The Construction Of A Modern Bus Depot With Electric Charging Infrastructure In Freising. The Project Includes A Social Building With A Control Center, Office And Seminar Rooms As Well As A Sanitary Area, A Workshop For Maintenance Work And A Wash Hall For Cleaning Vehicles. All Buildings Will Be Constructed Using A Combination Of Timber Construction And Reinforced Concrete And Will Have Flat Roofs With Green Roofs. The Construction Site Is Fully Developed, Has Ground-Level Entrances And Driveways To The Buildings As Well As A Large Construction Crane For Shared Use. The Social Building Extends Over Three Floors, Including A Partial Basement In The Stairwell Area, And Has A Ridge Height Of Around 8.22 Meters. The Construction Is Carried Out Using A Wooden Frame Construction With Glued Laminated Timber Supports As Well As Wood-Concrete Composite Ceilings And Stacked Board Ceilings. The Outer Walls Cover An Area Of ​​Around 489 Square Meters, Supplemented By An Attic Backsplash Of Around 44 Square Meters. The Facade Area Is 558 Square Meters And The Base Insulation Is Around 75 Square Meters. The Facade Cladding Made Of Larch Profiled Boards Extends Over Around 535 Square Meters And Gives The Building A High-Quality, Natural Look. The Workshop Is Designed On One Floor And Reaches A Height Of Around 7.15M. The Supporting Structure Consists Of Hall Trusses And Double Supports Made Of Glued Laminated Timber, Which Have A Span Of Up To 7.56 M. The Flat Roof Is Made Of A Trapezoidal Sheet Metal Construction And An Osb Underlay And Covers An Area Of ​​Around 275 Square Meters. The Attic Cladding Extends Over Around 390 Square Meters, While The Facade Cladding Made Of Larch Profiled Boards Covers An Area Of ​​Around 498 Square Meters. The Construction Is Designed For High Load Capacity And Longevity And Offers Sufficient Space For Workshop Use. The Washing Hall Will Also Be Built On One Floor And Will Reach A Height Of Around 7.15 M. The Supporting Structure Consists Of Hall Trusses And Double Supports Made Of Glued Laminated Timber, Which Are Required For The Large Gate Openings And The Roof Construction. The Flat Roof Covers An Area Of ​​Around 161 Square Meters And, Like The Workshop, Is Made Of Trapezoidal Sheet Metal And Osb Panels. The Attic Cladding Extends Over Around 302 Square Meters, While The Facade Cladding Made Of Larch Profiled Boards Covers An Area Of ​​Around 360 Square Meters. The Washing Hall Is Designed For Cleaning Electric Buses.

Contact Information