|
1. The Subject Of The Order Is To Provide 24-Hour Maintenance And Supervision Over The Operation Of Power And Receiving Devices For Permanent Lighting Of Streets, Bridges, Tunnels, Squares, Open Parks And Green Areas, And Illumination Of Architectural Structures In The City Of Nowy Sącz. The Ordering Party Provides For 24-Hour Maintenance Of The Following Devices: 6,400 Lamps, 2,381 Light Points On The Common Overhead Line, 210 Pcs. Of Street Lighting Control Cabinets. 531 Pcs. Of Points Illuminating Pedestrian Crossings. Christmas Illumination. The Above Data May Change Depending On The Scale Of Modernization Works Carried Out In The City Of Nowy Sącz. In Addition, The Subject Of The Order Is The Performance Of Emergency Repairs And Replacement Of Damaged Elements As Part Of The Maintenance Of Street Lighting In The City Of Nowy Sącz In 2026. These Works Will Be Each Time Confirmed By A Separate Protocol And Will Consist In Renovation, Reconstruction, Reconstruction, Expansion And Replacement Of Street Lighting With All Related Works. The Basic Scope Of Maintenance And Upkeep Includes A) Inspection And Assessment Of The Technical Condition Of Devices: The Condition Of Visible Parts Of Wires, Their Connections, And Lighting Poles And Accessories (Lighting Fixtures, Lighting Sources, Closures Of Recesses In Poles, The Painted Surface Of Poles, The Cleanliness Of Lamp Covers, Etc.), The Condition Of Safety, Control And Measurement Devices, Ignition Systems Of Fixtures, Protectors, Etc. Descriptions Of Circuits In Control Cabinets And Boards, Condition Of Warning And Information Descriptions And Marking Of Lanterns, Correct Operation Of Power Supply Elements And Control Devices, Condition Of Insulation And Checking The Effectiveness Of Anti-Shock Protection, And Removing Irregularities Found During The Inspection. B) Replacement Of Damaged Light Sources, Sockets, Chokes And Capacitors, Etc. C) Disposal Of Dismantled Devices That Cannot Be Reused. D) Replacement Damaged Booms, Doors And Pole Fuse Boards, Etc. E) Adjusting The Position Of Luminaires And Reflectors, As Well As Sagging Road Lighting Cables, Etc. F) Repairing Switchboards, Lighting Cabinets (Replacing Locks, Bolts, Doors) And Equipment (Clocks, Fuses, Switches, Contactors, Etc.).G) Eliminating Threats To Bystanders Resulting From Random Events (Road Accident, Storm, Flood, Vandalism, Theft, Etc.) Damage To Lighting Devices, Dismantling Damaged Devices And Securing The Scene Of The Incident.H) Locating Damage To Cable And Overhead Lines.I) Trimming Tree Branches Covering Lighting Fixtures And Absorbing The Light Flux, As Well As Bringing Them Closer To Overhead Lines.J) Controlling The Time Of Turning On And Off The Lighting.K) Maintaining The Lighting Of All Light Fixtures At Set Hours, In Relation To Time Of Sunrise And Sunset.L) The Ordering Party May Order Clocks To Be Set According To The Indicated Switching On/Off Time Of Individual Lighting Circuits.M) Checking The Founda
|
