Tenders Are Invited For Heating, Ventilation And Air-Conditioning Installation Work – Heating And Cooling Te ... in Germany

Work Detail

Heating, Ventilation And Air-Conditioning Installation Work – Heating And Cooling Technology For The House Of Education - Ihk Ulm. Heat Is Supplied Via A Connection To The Fug District Heating Network, While Cooling Is Supplied Via A Refrigeration Machine Installed On The Roof. The Standard Heating Load And The Cooling Load Were Calculated In Accordance With The Applicable Standards And Are Each Approx. 130 Kw. Heating And Cooling Takes Place Primarily Via Underfloor Heating. For Cold Distribution, A Cold Water Circuit With A Cold Storage Tank Of Approx. 1,500 Liters Is Provided, Which Is Supplied Via The Refrigeration Machine; The Switchover Between Heating And Cooling Takes Place On A Floor-By-Floor Basis. The Pipe Network Must Be Made Of Steel Pipes Or Stainless Steel Pipes. The Insulation Of The Pipes Is Carried Out In Accordance With The Heating System Regulations Against Heat Loss. The Thermal Insulation Is Carried Out As Follows: Distribution Lines Visible Under The Ceiling Are Insulated With Aluminum-Clad Rock Wool And Pvc Jacketing, Distribution Lines In Riser Shafts And Suspended Ceilings With Aluminum-Clad Rock Wool, Distribution Lines Under Plaster With Hoses Made Of Pur Soft Foam And Distribution Lines As Well As Pipe Installations In The Heating Center With Aluminum-Clad Rock Wool And Pvc Jacketing. Project Key Figures: Gross Floor Area (Gfa): Approx. 3,329 M² Gross Volume (Bri): Approx. 13,085 M³ Floors: 6 Including Basement Total Dimensions L X W X H: Approx. 28.36 X 23.36 X 22.50 M

Contact Information