|
Tender For Special Repair To Building No-P-09 At Hanuman Temple Under Of Ge(South) Secunderabad.; 1 Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc and removing from site to a distance n.exc 500 Mtr complete all as specified and as directed. 2 M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in padding (level course) on roof incl finishing thecement concrete surfaces even & smooth without using extra cement complete all as specified and as directed. 3 M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transverselyby torchbonding overcoat of hot blown andone coat of bitumen basedpaint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and as directed. 4 M & L for rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors,mixed with WPC @3% of the weight of cement or as per mnufacturers instruction finished even and smooth w/o using extra cement complete all as specified and as directed.NOTE: WPC will be measured and paid separately under relevant item including taking down of old plaster. 5 Cleaning the surfaces thoroughly from dust, dirt & projections and applying a coat of hot blown bitumen 85/25 @ 1.2Kg/Sqm over a coat bituminous primer @ 0.3 lit per sqm in sunken floor complete all as directed and as specified. 6 M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surfacecomplete all as specified and as directed. 7 M & L for PCC (1:5:10) type E2 (using 40 mm graded crushed stone aggregate) as Sunken in filling and mass concrete complete all as directed and as specified. 8 Supply only integral water proofing compound complete all as specified and as directed. 9 Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. 10 Dismantling stone slab or tiles of any description or thickness laid in any mortar as in floors, aprons etc complete all as specified and directed 11 M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed. 12 M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmasin floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed. 13 All as per item No 12 above but asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3 complete all as specified and as directed. 14 M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15mm thick screed bed in CM 1:6 completeall as specified and directed. 15 M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as spd and directed. 16 All as per item No 15 abovebut on vertical surfacesas in skirting/dado level etc complete all as specified and as directed. 17 M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 and complete all as specified and as directed. 18 M&L for Heavy duty Vitrified tiles of size 300x300x8 to10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. 19 All as per item No 18 above but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified and as directed. 20 M &L for granite 18-20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side including demolition of old stone any type complete all as directed and as specified 21 M&L for green marble work 18 to 20mm thick (table rubbed and polished)windowcills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed. 22 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement 20mmscreed base in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 23 M&L for machine cut kota stone slab 20-25mm thick in riser of steps, treads, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding of edges complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surfacecomplete all as specified and directed. 24 Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. 25 M&L for precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded stone aggregate) and settingin cement mortar (1:6) complete all as specified and as directed. 26 M&L for precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4), complete all as specified and as directed. 27 M & L for cement concrete 1:3:6 type C-1, 75 mm thick using 20mmgraded crushed stone aggregates as in plinth protection finished fair and even with using extra cement complete all as specified and as directed. 28 Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and as directed. 29 M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed. 30 M&L for rendering in two layer i.e.5mm thick inCM 1:4 mixed with water proofing compound@3% of weight of cement used in top 5mm thick layer or as per manufacturers instructin over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished evenand smooth without using extra cement complete all as specified and as directed.(Note WPC shall be measured and paid separately) 31 M&L for rendering 5 mm thick on ceiling in CM 1:3finished even and smooth without using extra cement complete all as specified and as directed complete all as specified and as directed. 32 M&Lfor preparation of newly plastered wall surfacesand applying two coat of oil bound distemper over one coat of cementprimer and over one coat of 3mm average thick wall care putty including leveling the surface which undulation found with cement putty etc complete all as specified and directed. 33 M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. 34 M&Lfor preparation of newly plastered ceiling surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of cement primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. 35 M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of acrylic emulsion distemper over one coat cement primer and over a coat of 3mm average thick wall care putty including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified and as directed. 36 M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of cement primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. 37 M&L for complete removal of existing treatment on ceiling by scrapping, washing, cleaning etc and applying two coats of oil bound distemper over one coat cement over a coat of 3mm average thick wall care puttyprimerincluding filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc.complete all as specified and as directed. 38 M&L for Preparation of new steel surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat Red oxide primer.complete all as specified and directed 39 Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and as directed. 40 Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Eachincl iron mangery complete all as specified and as directed. 41 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples. compete all as specified an directed. 42 S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and as directed. 43 S & F for Factory made solid PVCmolded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. 44 M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. 45 M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. 46 M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed. 47 M&L forMild Steel flat ironas in hold fast supplied and fixed including tarring complete all as specified and as directed. 48 M&Lfor PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in Coping and similar work complete all as specified and as directed. 49 M&L for 30 mm thick flush door shutters solid core construction with block board core and both face covered with decorative face venner with lipping/frame to match complete all as specified and directed. 50 S &F2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and as directed. 51 S & F powder coated anodised aluminiumframe,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 52 S & F powder coated anodised aluminium sliding/openable window shutter and top hung ventilator shutters with sash barsaluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed.(note: Glass panes and wire mesh shall be measured and paid seperatly ) complete all as specified and as directed. 53 Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and as directed. 54 Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane. complete all as specified and as directed. 55 S & F for 4.0 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed. 56 M & L for second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at jointscomplete all as specified and as directed. 57 S&F 18 mm thick plywood BWR type fixed with screws with timber frameworkcomplete all as specified and directed. 58 S&F 12 mm thick plywood BWR type fixed with screws with timber frameworkcomplete all as specified and directed. 59 Material and labour for 0.9 mm thick colour / white laminates type I or surface finish, colour and pattern fixed to wooden surface with glue complete all as specified and directed . 60 S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised. complete all as specified and as directed. 61 S&F for aluminium anodised 100mm hasp and staple, safety type, brass with mild steel hing pin incl bolt to hinge plate and fixed with screws. complete all as specified and as directed. 62 S & F 100mm longAluminium anodisedbarrel tower bolt of extruded section complete all as specified and as directed. 63 S&FAluminum anodized barrel bolt of extruded section 125mm long complete all as specified and as directed. 64 M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 65 S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed. 66 S&F extruded aluminum alloy handle fabricated type anodized 150mm long. complete all as specified and as directed. 67 S&FAluminum anodized barrel bolt of extruded section 150mm long complete all as specified and as directed. 68 S&F magnet catcher for cupboards or wordrobe etc complete all as specified and as directed. 69 S&F stainless steeldrawer channeland ball bearing slidetelescopic channel for kabinet or cupboard complete all as specified and as directed. 70 S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and as directed. 71 S&F for 300mmlong aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. 72 S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and as directed. 73 S&F in repairs stainless steel curtain rail, cromium plated with fixing brackets, stops, roller etc complete all as specified and directed. 74 M&L for PCC 1:2:4 type B1 (using 20mm graded crushed aggregate) as in base of water tank on roof surface complete all as specified and as directed. 75 S&F in repair rotational moulded polyethylene water storage tanks 1000 lts(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1. complete all as specified and as directed. 76 S&F in repair rotational moulded polyethylene water storage tanks 500 lts(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 complete all as specified and as directed. 77 S&F 20mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT.complete all as specified and as directed. 78 S & F Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe and loud in repairs. complete all as specified and as directed. 79 S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mmsize with PTMT nuts of length 450mm complete all as specified and directed. 80 S&F in repairs vitreous China squatting pan, `Orissa pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. 81 S&F in repairs vitreous china warewash hand basin white flat back of size 550x 400mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed. 82 S&F in repair CP long body Bib taps fancy typeChromium platedcast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed complete all as specified and as directed. 83 S&FCPStop valves/angle cock cast copper alloy,fancy type,with long shank and cup,bore15mm, fixedcomplete all as specified and as directed. 84 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. 85 S&F600mm X450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick building board or commercial plywood and fixed to wooden pluge as in repairs. complete all as specified and as directed. 86 Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) complete all as specified and as directed. 87 S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specified and as directed. 88 S&F Sheet glass shelf assembly consisting of 5.5mm thicksheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 89 S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed complete all as specified and as directed. 90 S&F in repairs15mm fancy type chromium plated pillar taps cast copper alloy screwed down high pressure complete all as specified and directed. 91 S & F in repairs for wall mixer 3-in-1 system with provision for both hand shower and over head shower composite with 115 mm long bend pipe connecting legs & wall flanges Mixer(Make: Prayag Cat No PIS-80H), hand shower including 1.5 mtr flexible tube with hookCat No BHS-87, and over head showerwith arm and flange(300mm) of cat No BOS-90. or Equivalent make. 92 S & F kitchen plate rack size (900mmx600mm)made of stainless steel, complete all as directed and as specified. 93 Dismantling of cast iron drain pipe 100 mmdia from floor/walls etc and taking out oftrenches/floors complete all as specified and as directed. 94 S&F110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed. 95 S&F110 mm PVC (SWR) pipes single socket in any length with rubber ring joints as in floor trenches complete all as specified and as directed. 96 S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed. 97 S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door complete all as specified and as directed. 98 S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed. 99 Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out oftrenches/floors complete all as specified and as directed. 100 S&F75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and as directed. 101 S&F75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints as in floors complete all as specified and as directed. 102 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed. 103 S&F 75 mm PVC (SWR) bends any redius with access door complete all as specified and as directed. 104 S&F 75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door complete all as specified and as directed. 105 PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair complete all as specified and as directed. 106 S & F 110mmaid PVC (SWR) WC connector with lip ring complete all as specified and as directed. 107 S & F 110mmaid PVC (SWR) WC connector bend type complete all as specified and as directed. 108 S&F 25 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed 109 S&F in repairs of CPVC pipes20 mm dya SDR 11 & plian CPVC SDR 11 fittings in wall /ceiling or laying in floors taking down old GI tubes complete all as specified and directed. 110 Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. 111 M & Lfor cement concrete in slabs supportedon walls, beams, columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the light type B1 1:2:4 (using 20mm graded crushed stone aggregate)complete all as specified and as directed. 112 M & L for form work to soffits of suspended slabs such as roof slabs floor slabs landings and similar works n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed. 113 S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending sprially for columns, hooks ends and binding with Mild steel wire (annealled) not less than 0.90mm dia (or) securing with clips complete all as specified and as directed. 114 Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area complete all as specified and as directed. 115 Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified and as directed. 116 Taking down existing unserviceable MCBs/MCCBs/Distribution boards any capacity complete all as specified and as directed. 117 M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable for modular fittings with back plate and cover plate for housing modular switches, sockets, fan regulators etc. complete flushed to wall and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.(2) The cost ofcutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. 118 All as per Sl item No 117 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator. complete all as specified and as directed. 119 All as per Sl item No 117 above, but for One 5 Ampssocket outlet point on the independent board complete all as specified and as directed. 120 All as per Sl item No 117 above, but for One 5 Ampssocket outlet point on the same board complete all as specified and as directed. 121 All as per Sl item No. 117 here in before, but for OneBell point controlled by one, bell push complete all as specified and as directed. 122 All as per Sl item No 117 above but for One light point controlled by two way switchcomplete all as specified and as directed. 123 All as per Sl item No. 117here in before, but for wire 2.5 Sqmm for Power point. complete all as specified and as directed. 124 S & F in repair Switch Modular type 1 Module 6 Amps, 230 volts complete all as specified and as directed. 125 S & F in repair Switch Modular type 1 Module 16 Amps, 230 volts complete all as specified and as directed. 126 S & F in repair Switch Modular type 2-way, 1 Module 6 Amps, 230 volts complete all as specified and as directed. 127 S & F in repair Bell Push Switch Modular type 1 Module, 230 volts complete all as specified and as directed. 128 S & F in repair Socket Modular type 2 Module 6 Amps, 230 volts complete all as specified and as directed. 129 S & F in repair Socket Modular type 2 Module 16 Amps, 230 volts complete all as specified and as directed. 130 S & F in repair Electric Bell Ding-dong working on 230 volts AC Supply complete all as specified and as directed. 131 S & F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. 132 S & F in repair lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plateincluding LED Bulb 15 W complete all as specified and as directed 133 S & F 20 W surface / wall mountedLED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed .Make :- Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT 134 S & F 10 W surface / wall mounted 2 feet LED batten light fittinginput voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make:Crompton CCS-103-10-65-SL-DP-NWH / Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 / Bajaj-BCLAB10WLEDCWLED 135 S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal bodyof suitable size complete all as specified and as directed.Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED 136 S & F Decorative LED wall light fitting, made out of polycarbonate suitable for and including B-22 base LED Bulb 10 watt fixed on wall and making electric connection complete as per Havells model No. CITY-1, LHDL02160099. 137 Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,IP 65/66 protection with necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers all as specified and directed.Make :- Crompton TRP-409-45-57-SL-GL-NSG / HAVELLS ENDURASUNDOWNSL 45WLED765PASYBOPC / Bajaj-VISTAP45LWHPOPCSD 138 S & F in repair MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and as directed. 139 S & F in repair MCB SPN 40 to 63 Amps 240 volts C- typecomplete all as specified and as directed. 140 S & F in replacement sheet metal enclosure MCB DBSPN 2 way, 240 volts with locking system complete all as specified and as directed. (For common area lighting) 141 S & F in replacement sheet metal enclosure MCB DBSPN 4 way, 240 volts double door with locking system complete all as specified and as directed. (For Servent Qtr) 142 S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 200 A complete all as specified and as directed . Note :- MCCB shall be measured and paid separatly. 143 S&F in repair MCCBs 415V, 36KA, 200 Amps 4 Pole suitable for V-TPN including removing the existing unserviceable one all as specified and as directed. 144 S & F in repair in repair TPN DB 4 way double door with MCB 4P as incoming, made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed . (For Offr Qtr)Note :- MCB TPN shall be measured and paid separatly. 145 S & F in repair MCB TPN 63 Amps 240 volts complete all as specified and as directed. 146 S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed. 147 S & F in repair Power Unit for AC with one 25 Amps socket, (incl 3 pin plug Top 25 Amps) one electronic starter 25 Amps and one MCB SPN 25 Amps C curve all accessoroes shall be fixed in one six module metal GI box, frame and cover plate and electrically connecting up as per Havells Cat No. DHDUCDP0253025 or equivalent model in Legrand / L&T. 148 Taking down Submain wiring and M & L Submain wiring with 4 runs of single core 10 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 10 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. 149 All as per Item Sl No 148 above but using 3 runs of single core 4 sqmm. (for AC & Geyser Point) complete all as specified and as directed. 150 All as per Item Sl No 148 above but using 3 runs of single core 2.5 sqmm. (for Bldg Security Lights) complete all as specified and as directed. 151 Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and as directed.(Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate). 152 Supply and fixing ceiling fans complete with blades, copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (=)6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directed.Make :- Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA / Havells Cat part No:PRO 28BLDCNote :- Cost for Taking down old existing Ceiling fan and deposit to MES Store shall be born by the contractor only and no extra cost against it shell be paid. 153 Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers for Kitchen of Md Accn complete including making suitable size hole in wall as specified and directed. Make: Havells Cat part No:Ventil air DSB/ Crompton drift air plus300mm / Bajaj-Supreme plus. 154 Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm sweep for Toilet of Md Accn complete including making suitable size hole in wall as specified and directed.
|
