|
Tender For Special Repair To Building No P-112 Or Dining Hall And P-113 (Or Cook House) At 996 Ad Regt Wksp And Construction Of Parking Shed At Lao (A) Bhuj At Mil Station Bhuj Under Ge Army Bhuj; 1 Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. 2 M&L Coloured Glazed Ceramic tiles (Digital Designer tiles) 300 x 450 and6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4with all possible design combination as specified by Engr-In-charge complete all as specified and directed . 3 M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed. 4 M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed. 5 All as per item above but skirting includig 10 mm thick renderingin CM 1:3 complete all as specified & directed. 6 M&L for light shade Virified Ceramic tiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surfaces includig 10 mm thick renderingin CM 1:3 complete all as specified & directed . 7 Dismantling of stone slabs and tiles (Kota stone etc.)of any description or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. 8 M&L for 18-20mm thick Granite (of any type) (Jet black) work (table rubbed and polished) in cooking platform, Jambs cill and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed. 9 M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with greycement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. 10 M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed. 11 M&L for machine cut Kota stone slab 20 mm to 25 mm thick, as in slab/plateformand thread for steps set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, complete all as specified and directed. 12 Demolition of precast concrete block walling and similar items i.e.. ashlar facing dressed stone work, precast concrete articles etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc.complete all as specified and directed. 13 M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) type C-1 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointedin Cement Mortar (1:6) complete all as specified and directed. 14 Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/cellingetc.including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. 15 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) 16 M&Lfor rendering 15 mm thickin CM (1:6) on fair faces of brick work or concrete surfaces/stone masonryand finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 17 M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. 18 Material & Labour for preparation of old/new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 19 M&L for preparation ofplastered surfaces of wall and applying 2 coats ofOil Bound distemperover 1.5mm to 2mm thick wall putty finished to a even and smooth finish over a coat of alkali primer complete all as specifed directed. 20 M&L for preparation of the plastered surfacesof ceiling & applyingtwo coats of white wash on ceiling surfaces complete all as specified and directed. 21 M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coat synthetic enamel paints on new steel surfaces over a coat of red oxide zinc chrome primercomplete all as specified and directed. 22 M & L applying two coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girthincluding preparation of surfaces complete all as specified & directed. 23 Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. 24 Demolition of cement concrete of any description and in any position (reinforced) as in slab, vertical chajjas and the likes etc complete all as specified and directed. 25 M&L forPCC (1:3:6) type C2, (using40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cementcomplete all as specified and directed. 26 M&L for complete removal of existing roof treatment incl brushing and applying neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed. 27 M&L for averaging 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding incl water proofing compund complete all as specified and directed. 28 M&L Rendering 10 mm thick of CM 1:4onconcrete roofsurfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight.complete all as directed. 29 M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying APP modified membrane pre-fabricated , reinforced with non woven polyester , of 3.00 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps complete all as specifiedand directed. 30 M&L cleaningsurface and applying two coats of aluminium painton roof or vertical surfaces complete all as specified and directed. 31 M&L for water proofing treatment to wall surfaces as under :-Surface PreparationSurface must be thoroughly cleaned, free of dust, grease etc and washed well with water. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree.PrimingAfter the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water(2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs.COATINGBrush apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5-4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Classic Topcoat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 7-8 sq mtr per litre / coat application to achieve about 50-60 microns DFT. 32 Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed. 33 Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed. 34 Taking down shutters of any description and in any positionexceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed. 35 S & FPowder coatedAluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips,shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. 36 M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 9x9x1 mm all as specified 37 S&Fpowder coated aluminium anodisedventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members andhalf portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified. 38 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required complete all as specid & directed. 39 S&F solid PVC door frame of size 50mmX47mm made out of 5mm one side prelam colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing complete all as specified and directed. 40 S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels both face is covered with decorative face veneer withlipping/frame to match face on both sides with lipping/frame to match completeall as specified and directed. 41 M & L for 30 mm thick glazed and skeleton shutters of 2nd class Hard Wood(Not less than Hollock wood) local made shutter, open rebated and prepare to revive glass, gauge etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed. 42 S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed . 43 M&L preparation of the new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer completeall as specified and directed. 44 S&F 100 mm long butt hinges stainless steel medium weightand fixed to wooden or PVC frame fixed in repairs by stainless steel screw as directed . 45 S&F aluminium handles cast type, anodized of 150 mm size complete all as specified and directed. 46 S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed. 47 S&F butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed. 48 S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 49 Supply and fixing in repairsdecorative type curtain rod stainless steel finishofpipe 22 to 25 mm dia as per sample approved by GE complete all as specified & directed. 50 Supply and fixing of purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample approved by GE complete all as specified & directed. 51 Supply and fixing in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample approved by GE"s complete all as specified & directed. 52 Dismantling water tanks of any description and in any position , of capacityexceeding250litres but not exceeding 500 litres complete all as specified and directed. 53 S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed. 54 S&F Ball brass valves , high pressure ,withpolythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed. 55 S&Fin repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including "P" trap and lime bedding making good to floors complete complete all as specified and directed. 56 S&F in Repairs PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity(ISI marked) white with inlet, ball valve, float andhandle, flush pipe of polyethylene pvc 32mm dia high or low densityincluding brackets complete all as specified and directed. 57 S&F PVC connections 15 mm dia and 450 mm long with brass nutscomplete all as specified. 58 S & F in repair vitreous china wash basin pedestal type , white flat back , size 550mmx450mm withand including pedestal, Waste fittings, brass, chromium plated forbasins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including bracket , CP waste coupling& flexible waste pipe complete all as specified and directed . 59 S&F sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed. 60 S&F in repair vitreous chinaCounter/ Table top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent 61 S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore complete all as specified and directed. (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent 62 S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outletscrewed for pipe or connectionsincludingnecessary packing, unionand cap and fixed complete all as specified. 63 S&Fin repair for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed. 64 S&F in repairBib taps , cast copper alloy screwed down high pressurewith crutch or butter flyhandle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and directed. 65 S&F in repair Stop valves, fancy type chromium platedISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubingpipe, high pressure, with crutch butter fly handlecomplete all as specified and directed. 66 S &F in repair 25 mm dia stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified & directed . 67 S&Fpillar taps in repair of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type 68 Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc.,(measured overall as fixed along the centre line over fittings and accessories)complete all as specified. 69 S&F75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. 70 S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. 71 S&Fin repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 72 S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed. 73 S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed. 74 S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed. 75 S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed. 76 M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed. 77 M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed. 78 S&F (concealed / open) 20mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore complete all as specified and directed. 79 S&F (concealed / open) 25mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore. 80 S&F in repair stainlesssteel grating 150 x150mm size over floor trap anti cockroach all as approved sample all as specified and directed. 81 S&F in repair5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorativecap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed. 82 S&F in repair of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSICcomplete all as specified and directed. 83 S & F CP Towel Rail 600mm long with and including Chromium plated brass screws and wooden /plastic cleats(Minimum weight 190gms) complete all as specified and directed. 84 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed Fe 410-W (Gde- E- 250) quality- A complete all as specified & directed. 85 S & F welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre n exc 4 kg complete all as specified andas directed . 86 Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified. 87 S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), includingdistance pieces, cleats etc conforming toFE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified. 88 M&L 75 mm thick PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in as in sub baseall as specified and directed. 89 Providing prrecast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved. 90 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying if inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed . 91 M&L for Plain cement concrete 1:2:4 type B1using 20mm graded crushed stone aggregate as in copingincluding necessary form work complete all as specified & directed. 92 Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings complete all as specified and directed. 93 S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc; complete all as specified and as directed. 94 Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed. 95 S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood 96 All as per Above item but 12 mm thick plain cheluka plywood 97 S&F brass Handle fabricated type polished of Size 100 mm complete all as specified and directed. 98 Surface excavation n.exc 30 cm deep & avg 15 cm deep & getting out in any type of soil complete all as specified and directed. 99 Removing excavated material at a level n.exc 1.5 m above the starting point50 mtr depositing where directed complete all as specified and directed. 100 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in any type of soilcomplete all as specified and directed. 101 M&L, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, fillingand mass concrete all as specified and directed. 102 M/L for two coat of enamel paint( Ist quality) over a coat of red oxide primer on newsteel surface including preparation of surface over 10Cm width or girth all as specified. 103 M&Lfor hardcore of broken stone of gauge n. exc 63mm, deposited spread and levelled in layers n exc 15 cm thick watered, rammed and rolled to true surface with8 to 10 tonne power roller/vibratory rollercomplete all as specified. 104 M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. 105 Dismantaling and taking down copper / aluminium point wiringany type / size complete with removing all connection and accessories such asswitches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surfacecomplete all as specified and directed. 106 Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed. 107 Taking down old and unsrevicablesheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB"s , insulator etc complete after removing all connection and making good the disturbed surface all as directed. 108 M&L for Point wiring complete with FR PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled conduit medium grade ,minimum 20 mm dia, ISI Marked,with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete . 109 One light point controlled by one way one switch SP 5 Amps ,240 V. 110 One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V. 111 One switch socket outlet 3 Pin, 5 Amps, SP on independent board. 112 One switch socket outlet 3 Pin, 5 Amps, SP on sameboard. 113 All as per the above item No 4 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and directed. 114 S&F modular switch one way 6 Amps , 1 module type complete . 115 S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and directed. 116 S& f modularswitch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete. 117 S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed. 118 Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting uptoPVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirementand 2 Nos ofround or square PVC bolck for fixing of FTL fitting complete all as per directed. 119 S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed. 120 Supply & fixing modular fan regulatorstep type , 1 module complete all as specified. 121 M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductorcableconfirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 6 Sqmm (1x6 sqmm )single core FRLS PVC insulated unsheathed copper conductor cableas earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 6 Sqmm( 2x6 sqmm + 1x6 sqmm ) cable and one meter of conduit will be measured as one unit /Rm. 122 S&F sheet metal enclosures fordistribution board when MCB to be used SPN ( Single pole and neutral ) 8 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door typecomplete all as specified and directed. 123 Supply and fixing 415V 10KA "B" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.(i) TP 25 To 63 AMP complete all as specified and directed. 124 Supply & fixing MCB DBs TPN vertical, Double door, with provision of MCCB as incommer , 4 way, flush in wall, including civil work to match the disturbed surface with existing complete all as specified and directed. 125 S&F MCCB of capacity 100 Amps , 415 Volts, rupturing capacity 16 KA complete. 126 S&F MCB SPN,40 Amps, 240 Volts, rupturing capacity 10 KA."C" Seriescomplete. 127 S&F MCB SP, 5 to 32Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete. 128 M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nutsall shown in electrical plate No.3 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnelwith watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.Note :- (i)Earthing shall be tested as specified incasul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing,if the desired earth resistance is not obatined the earthing wiil be re done by thecontractor at his on risk and cost to the entire satisfaction complete all as specified and directed. 129 Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core complete all as specified and directed. 130 Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as specified and directed. 131 Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. 132 M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed. 133 Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete. Complete all as specified and directed. 134 Supply and laying GI tube light grade 50 mm bore complete. Complete all as specified and directed. 135 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers All as specified and Directed. 136 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep copper wound 100% Aluminium blades with thickness of 1.0mm. Min air delivery 210 CFM with service value of BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 137 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete,complete all as specified and directed.
|