|
Tender For Certain Repair To Steel Furniture And Painting And Polishing Of Certain Wooden/Steel Furniture Under Ge (N) Bikaner; 1 M&L for removing old unserviceable top of items mentioned below and S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDFboard of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening/Welding of loose joints ofexisting frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge. 2 Table 900x600 With/Without Drawer(FD-1007/1008) 3 Table Office Clerk steel (FD - 84(M)/381/1004) 4 TeapoyVerandah (FD - 35/208/383) 5 Table office officer steel (FD - 1003) 6 Table 900x900 x760 mm steel (FD - 1009) 7 Table Conference / Library (FD - 1001) 8 Teapoy Verandah (FD/E6/MAP/17) 9 Table Dinning OR"s (FD - 165M) 10 TABLE OFFICE CLERK STEEL FD-381/1004 : 11 S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed by Engr-in-Charge. 12 S&F New drawers with appropriate size of sheet as existing as per drg and as directed by Engr-in-Charge. 13 TABLE OFFICE OFFICER STEEL FD-1002 : 14 S&F New drawers with appropriate size of sheet as existing, with locking device as per drg and as directed by Engr-in-Charge. 15 S&F New drawers with appropriate size of sheet as existing, as per drg and as directed by Engr-in-Charge. 16 Dismentling of existing unserviceable Shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drg and as directed by Engr-in-Charge. 17 CHAIR VERANDAH (FD-256): 18 Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane. 19 M&Lwith gas welding to broken components ofsteel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge. 20 M&L painting of chair steel frame with two coat of synthethic enamel paint of approved shade Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding and applying a primer coat of red oxide all as directed by Engr-in-Charge. 21 S&F PVC Shoes as directed by Engr-in-Charge. 22 ALMIRAH MED STEELFD-1032/87M : 23 Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxideprimer be of1 mm thickPBI sheet by weldingand finishing with mild grinding and as directed by the Engr-in-Charge.. 24 S&F shelves made of 1 mm thick MS sheet duly paintedshape and size as specified on drg. 25 Dismentling of unserviceablelocking assembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed by Engr-in Charge. 26 Denting/bending/welding, repairs of damaged parts,fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paintin dual shade of approved color (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge. 27 ALMIRAH LARGE STEEL WITH SHELVESFD-1031: 28 Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxideprimer be of 1 mm thickPBI sheet by weldingand finishing with mild griding and as directed by the Engr-in-Charge. 29 S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drg. 30 Dismentling of unserviceablelocking assembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed by Engr-in Charge. 31 Denting/bending/welding, repairs of damaged parts,fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer and as directed by Engr-in-Charge. 32 LOCKER STEEL FD-1029/54(M) 33 M&L dismentling of existing unserviceable Handles and S&F new handles CP steel 100 mm long with suitable SS screws of approved quality complete all as specified and directed by Engr-in-charge. 34 M&L dismentling of existing unserviceable Hasp and Stapple and S&F newHasp & staple of size 75x40mm 3mm thick stainless steel with suitable Nut&Bolt complete all as specified and directed by Engr-in-charge. 35 M&L dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxideprimer be of1 mm thickPBI sheet by welding and finishing with mild grinding as per drg and as directed by the Engr-in-Charge. 36 Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paintin dual shade as approved(Make: Berger/ Asian Paint) with sprayafter applying coat of red oxide primer as directed by Engr-in-Charge. 37 M&L dismentling ofof existing unserviceable MS Butt Hinges & S&F new MS Butt Hinges with suitable MS Screws as per specification and as per drg. 75 mm long of approved pattern complete for items srl No. 5.00, 6.00 & 7.00 all as specified and directed by Engr-in-charge. 38 Dismentling of existing unserviceable CP handles and S&F new CP handles of approved qualityfor Srl No. 5.00 & 6.00 as specified and approved by Engr-in-Charge. 39 Dismentling of unserviceable locks of Almirah Med/Large with shelves and S&F new Brass locks of approved make as specified and shown in drg. 40 S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelvesfor items Srl No. 5.00 & 6.00 complete as directed 41 Dismentling of unserviceablebushes of lockingasembly of Srl No. 5.00 & 6.00 and S&F new MS bushes of locking assemlyas directed by Engr-in Charge. 42 CHAIR CBA STEEL W/ARMS (FD-75) 43 Labour forremoving the existing worn out/ unserviceable seat of chair CBA steel and S & F new seat frame of size 460 x 420 mm made fromcommercial plywood 12 mm thick and 50 mm thick 40 Dfoam cushion, duly coveredwith cloth /rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. 44 All as per Sl. No. 13.01 but for Back of Chair CBA Steelof size 460x380mm 45 M&L for welding with 25 x 3.0 mm MS flat iron 510 mm long with holes to fixscrews to seat/back frame for fixingsheet/back frame including screws complete all as specified and as directed for Chair CBA Steel (FD 75 (M) 46 S&F new PVC Caps. 47 S&F new IInd class hard wood/PVC arms as per sample. 48 S&F wooden seats of IInd class hard wood duly caned (Godrejpattern)andpolished for chair CBA Steel 49 S&F wooden back of IInd class hard wood duly caned (Godrejpattern)and polished for chair CBA Steel 50 CHAIR CB STEEL W/O ARMS (FD-75) 51 S&F wooden seats of IInd class hard wood duly caned (Godrejpattern)andpolished for chair CB steel. 52 S&F wooden back of IInd class hard wood duly caned (Godrejpattern)and polished for chair CB steel. 53 S&FMS flat iron 25 x 3 mm duly welded to seat/Back frame of chair CB/CBA steel for fixingseat/back frame including screws complete all as specified and as directedby the Engineer-in-Charge. 54 S&F new PVC Caps. 55 TABLE BED SIDE (FD/E6/MAP/15 (R) 56 Removing of unserviceable sides in any position, S&F new sidesmade outof 18/19 mm thickexterior grade MDF board of approved shadeMake: Action Tesa/Novapan/Green Pannel Max (ISI Marked)including tightening of loose joints of existing frame before fixing the sides with steel corners and screwsshape and size all as specified on drg and as directed by Engr-in-Charge. 57 All as per Sl. No. 15.01 but for Back of Table Bed side. 58 All as per Sl. No. 15.01 but for top of Table Bed side. 59 S&F new top drawers made of MDF prelaminted board of exterior grade with SS Handle. 60 S&F new bottom drawers made of MDF prelaminted board of exterior grade with SS Handle. 61 Removing of unserviceable channels in any position, S&F new steel channels with screws(ISI Marked). 62 S&F new SShandles for drawers of approved shape and size as directed by Engr-in-Charge. 63 S&F hard PVC shoes of best quality as approved by Engr-in-Charge. 64 CHAIR SCHOOL WITH HANDBOARD (FD/E6/MAP/05) 65 Removing of existing unserviceable complete seat of chair and S&F new PVC seat frame of approved brand and color with suitable screws including tightening of loose joints of existing frame before fixing the seat with steel frame as shown in drgas directed by the Engr-in-Charge. 66 Removing of unserviceable writing hand board in any position, S&F new hand board with suitable size of screws with PVC lipingmade outof 18/19 mm thickexterior grade MDF prelamintedboard of approved shadeMake: Action Tesa/Novapan/Green Pannel Max (ISI Marked) shape and size all as specified on drg and as directed by Engr-in-Charge. 67 S&F the bottom tray alongwith clips duly tightened with suitable screws/nuts bolts to the frame as directed by the Engr-in-Charge. 68 S&F hard PVC shoes of best quality as approved by Engr-in-Charge. 69 FORM WITHOUT BACK OF SIZE 1525/1900 mm (FD-77 M/1027) 70 S & F in replacement of unserviceableseat with new seat of size 1525/1900 mm x 255 mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss. 71 FORM WITH BACK OF SIZE 1800 mm (FD-78 M) 72 S & F in replacement of unserviceableseat with new seat of size 1800 mm x 255 mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss. 73 S & F in replacement of unserviceableback with new back of size 1800 mm x 150 mm made out of 25 mm thick wooden planks of 1st Class hard wood (Teak Wood) with nut, bolt and washer and including polishing to wooden surface with french polish high gloss. 74 CHAIR CBA SPL WITH HANDREST (FD-120(M) Chair CBA Spl with hand rest 75 S&F wooden seatframe of Ist class hard wood (Teak Wood) duly caned (Godrejpattern)andpolished for chair CBA Splwith hand rest all as specified on drg and as directed by Engr-in-Charge. 76 S&F wooden back frameof Ist class hard wood (Teak Wood) duly caned (Godrejpattern)andpolished for chair CBA Splwith hand rest all as specified on drg and as directed by Engr-in-Charge. 77 Removing of unserviceable hand rest in any position, S&F new hand rest made out of 12mm thick Teakwood plank with suitable size of screws all as specified on drg and as directed by Engr-in-Charge. 78 Receptacle with bucket (FD-226/1044) 79 Removing old/Unserviceable parts of receptacle in any position and S&F new components complete all as specified (including cost ofreveting, nut & bolts, and pins etc shall be deemed to be included in quoted rates) and as directed by Engr-in-Charge. 80 S & F in replacement with new GI buckets of made out of 1 mm thick PGI sheet size of 300 mm high and 10 mm round bar provided for handle complete all as specified as directed by the Engineer-in-Charge. 81 Cutting and removing old unserviceable legs and frame parts of Table 900x600 With/Without Drawer(FD-1007/1008)/Table Office Clerk steel (FD - 84(M)/381/1004)/Table 900x900 x760 mm steel (FD - 1009)/Table office officer steel (FD - 1003)/Table Dinning OR"s (FD - 165M)/Form with & without back and S&F the new legs/frame parts made of MS 25 mm square pipe having 1.6 mm wall thickness by welding and including minor repair as per existing completeall as specified as directed by the Engineer-in-Charge. .Note:-(i) Cost of minor repair like welding to frame if required etc shall deemed to be included in the quoted rates.(ii) Cost of nuts, bolts and washers if required for fixing shall deemed to be included in the quoted rate.(iii) All work to be carriedout as shown on drawing and as directed by Engineer-in-Charge. 82 S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality of item Srl No. 1.00, 2.00,3.00, 17.00 &18.00 complete all as specified and as directed by the Engineer-in-Charge . 83 Denting/bending/welding, repairs of damaged parts, fixing loose shelves/Components, scraping and complete removal of existing coat of paints, filling with putty to obtain even surfaces, finishing and paintingwith two coats of synthetic enamel paintof approved shade (Make: Berger/ Asian Paint) with sprayafter applying a coat of red oxide primer as directed by Engr-in-Charge for the following:(Note:Painting including at site) 84 Almirah Medium steel with shelves (FD-67/243/350/1032) 85 Almirah large steel with shelves (FD-1031) 86 Almirah large steel 1/2Hx1/2 shelves (FD-1033/FD/E6/MAP/18) 87 Book case Steel w/glass shutters FD-90(M)/1028 88 Locker Steel FD-1029/54(M) 89 Chair CBA steel with arms (FD-75) 90 Chair CB steel without arms (FD-75) 91 Ladder (FD-44M) 92 Table 900x900 x760 mm steel (FD - 1009) 93 Table 900 x 600 x 760 mm with drawer FD-1008 94 Table 900 x 600 x 760 mm w/o drawer FD-1007 95 Rack steel adjustable 6 tier of various sizes ( FD -129(M)/1038) 96 Table office clerk steel (FD - 84(M)/381/1004) 97 Table office officer steel (FD - 1003) 98 Chair school with hand board FD/E6/MAP/05 99 Teapoy Verandah (FD - 35/208/383) 100 Form with Back of Size 1800 mm (FD-78 M) 101 Form without back size of 1525/1900 mm 102 Table Conference / Library (FD - 1001) 103 Teapoy Verandah (FD/E6/MAP/17) 104 Table Dinning OR"s (FD - 165M)
|
