|
Tender For Civil Repair Works At Bnp Dewas; 1 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge 2 Centering and shuttering including strutting, propping etc. and removal of form for. Columns, Pillars, Piers, Abutments, Posts and Struts 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and bindin. Thermo-Mechanically Treated bars of grade Fe-500D or more. All complete upto plinth level. 4 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 5 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) 6 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture 7 Repairs to plaster of required thickness in patches including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish as per direction of Engineer-in-Charge with cement mortar 1:4 (1 cement : 4 fine sand) 8 Painting of acrylic interior paint of Two Coat of required shade and approved brand to make even shade including scrapping of old surface and applying putty of single coat. 9 Providing and applying damp proof coat of approved brand. One coat 10 Painting with Acrylic exterior paint of required shade and approved brand to make even shade including scrapping of old surface wherever required to make even shade: Two Coat 11 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with scraping of old surface : Two coats 12 Providing and fixing of three track aluminum window of Size 5 feet x 3 feet in 18 gauge section of required color including dismantling of old wooden windows and make surface finish 13 Providing and fixing of Aluminium ventilation of size 3 feet x 2 feet in 20 gauge section fixed with half glasss and half mesh including dismantling of old wooden ventilations and make surface finish 14 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 15 Providing and laying vitrified floor tiles in different sizes of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry including grouting the joints with white cement and matching pigments etc., complete. 16 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm 17 Providing and fixing of stainless steel wiremesh of required shape and size as where ever required. 18 Structural steel work in single section, fixed with or without connecting plate, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer and enamel paint with all complete. 19 Construction of shelf with wooden panel using brick work and sandstone slab. Details of Shelf. Height: 8ft , Width 3ft, Depth 2.5ft with two Wooden Panel of required size including brickwork partition in mid with all accessories and all complete. 20 Providing and laying tiles in required size of approved make with grey cement slurry including grouting the joints with white cement and matching pigments etc., complete in water tank. 21 Providing and fixing of following accessories as per requirement 21.1 Providing and fixing of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. required diameter 15mm / 20 mm including all pipe and fitting 21.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) 21.3 Half stall urinals with 10 litre P.V.C. automatic flushing cistern 21.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required 21.5 Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame with 6 mm thick hard board backing of size 2.5 feet x 1.5 feet 21.6 Providing and fixing uplasticised PVC connection pipe of length 45 cm 21.7 Providing and fixing 32 mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 21.8 Providing and fixing PTMT bib cock of approved quality and colour : 15 mm nominal bore
|
