|
Tender For Special Repairs To Building No. P-08 At Altinho Goa; 1 Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc. 2 Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed. 3 M & L For RCC 1:2:4 Type B1, using 20mm graded aggregateSlabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likeincluding demolition of old slab any description complete all as specified and directed. 4 S & F TMT bars 10 mm dia and over, cut to length, bend to shape incl cranking, hooping etc. and binding with ms wire (annealed) not less than 0.9 mm dia. 5 S & F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, columns, beamsetc. complete all as specified and directed. 6 S&F rotational moulded polyethylene water storage tank (rectangular with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 1000 ltr including Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut including dismantling of old unserviceable water tanks complete all as specified and directed. 7 Taking down steel tubing and connections 15 mm boreincluding cleaning for refixing or removal to store complete all as specified and directed. 8 Taking down steel tubing and connections 20 mm boreincluding cleaning for refixing or removal to store complete all as specified and directed. 9 Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 10 Allasitem No. 09.00 abovebut for 25mm bore. 11 Supply and fixing in CPVC 20mm Brass Elbow (3/4 x 1/2) 12 Supply and fixing in CPVC 20mm Brass Tee 13 Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) 14 Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) 15 S/F Gate valve of 20mm dia brass all as specified and directed 16 S&F in repair Vitreous china wash down water closet(pedastal pattern) Rimless bowl with cistern for coupled WC with UF soft close slim seat cover, hinges,dual flush cistern fittings and all necessary fixing accessories size 390x645x845 mm, P Trap 180 mm complete all as specified and directed. Make : Jaquar (Code No ONS-WHT-10753P180UFSMZ) or equivalent. 17 Supply and fixed in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed. 18 Supply and fixed in repair PVC valveless, syphonic action type flush tank in repair,10 litre capacity with inlet ball valve, float & handle including brackets complete etc complete all as specified and directed. 19 S&F in repair Vitreous China Table top wash Basin in repair white size470x470x110mm with round shape and anti germ glazecomplete all as specified and directed.Make : Jaquar (Code No FSS-WHT-29901) or equivalent. 20 S&F in repair Stainless steel single lever high neck basin mixer tall boy with 150 mm extension body fixed spout without popup waste system with 600 mm long braided hoses complete all specified and directed. Make : Jaquar (Code No OPP-SSF-15005BPM) or equivalent. 21 S&F in repair Aesthetically designed bathroom mirror with Hi-quality 4mm glass dual hanging option durable and strong, with overall size 600 x 600 mm and mirror size 600 x 450, complete all as specified and directed. Make :- Prayag cat Part No 553 or equivalent make of approved by GE. 22 S&F in repairTowel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed.Make : Jaquar ( Code No ASN-1581) or equivalent. 23 S&F in repair Swan neck Pillar tapscast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot and Cold fancy type with long screwed shanks and fly nuts, screwed for pipe 30 mm bore and fixed complete all as specified and directed. 24 S&F in repair 20 mm Brass Chromium Plated Wall mixer wall mount with hand shower for mixing of hot and cold water screwed down completedall as spd and directed by Engr-in-Charge. 25 S&F in repair angle stop valves of fancy tpe chromium plated 20 mm bore pipe , cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for ironpipe or for unions and fixed as specified and directed. 26 S&F in repairBib taps 20 mm bore pipe chroumium plated fancy type with crutch or butterfly handle, screwed down complete all as specified and directed. 27 S&F Soap Dish Holder, in repairs, all as spd and directed by Engr-in-Charge.Make : Jaquar (Code No ACN-1131N)or equivalent. 28 S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Jaquar (Code No AHS-1553) or equivalent. 29 S&F Corner Glass shelf with bracket,all as spd and directed by Engr-in-Charge. Make : Jaquar (Code No CAN-1173) or equivalent. 30 S&F Hand Shower (Health faucet) (ABS Body) with 1 metre long easy Flex Tube in Chrome Finish and Wall Hook including two way CPbib cock complete all as specified and directed completeall as spd and directed by Engr-in-Charge. Make : Jaquar (Code No ALD-CHR-585) or equivalent 31 S&F PVC connection 15mm bore size with PTMT nuts of length 45cm. 32 Taking down cement plaster on wall built in cement or cement mortar raking out joints, hacking for key, scrubbing out with water etc. complete. 33 M & L rendering 15 mm thickon stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6without using extra cement. 34 M & L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using water proofing compound.Note :- Water proofing compound will be measured seperatly. 35 Supply only integral waterproofing compound 36 M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 3mm wall care putty on new surface completeall as specified and directed. 37 M&L for preparation of old plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm including complete removal of existing treatment. 38 M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over coat of alkali resistant primer over3mm thick wall care putty on internal walls surfaces complete all as specified and directed. 39 M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. 40 M & L for complete removal of existing treatment on surfaces of wall all as specified and directed. 41 Material and labour for applying3mm thick wall care putty on internal walls surfaces complete all as specified and directed. 42 Material and labour for applying two coat of oil bound distemper(white/tinted)over a coat of primer on internal walls surfaces complete all as specified and directed. 43 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) . 44 S&F Vitrified dark shade/Double charged/ ultrarcharged vitrified (square or rectangular ) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors ,skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 20mm thick screed bed in CM 1:6 complete all as specified and directed. 45 M&L glazed ceramic coloured designer pattern tiles 600mmx 300mmx7mm thick on vertical surface such as skirting, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4. 46 M & L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cementslurry and pointed in white or coloured cement to match incl 20mm th screed bed in CM 1:6. 47 M & L Cement concrete type C- 2, 1:3:6 (40mm graded aggregate)75 mm thick as in sub base. 48 M&L for Endura Industrial tiles or its equivalent 12 mm thick (square/rectangular) area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. 49 Dismantling boarding,wall/ceiling/gypsum board any description, fixed in any position with nails. 50 M&L for fix Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm includingHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and asper direction of Engineer In Charge 51 M&L for 6mm thick with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mmx600mmgrid timber/GI/Aluminium framework with screws complete all as specified and as per direction of Engineer In Charge 52 Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) for plinth protection,sub base and foot path. 53 M & L PCC 1:3:6 type C-1(20mm graded aggregate), 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement. 54 M&L for cement concrete type D2 1:4:8 (40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 55 M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc. 56 Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5sqm but n exc 4 sqm each. 57 Taking down chowkat with shutter(without taking off shutter from the frame) area n exc 1.5 sqmeach complete all as specified and directed. 58 Taking downshutters of any description exc 1.00 sqm and n exc 2.00 Sqm each complete all as specified and directed. 59 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 45x70 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 60 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 65x125 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 61 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 62 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed door shutter of size 30mm thick open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 63 S & F Mortice lock of 4 levers aluminium, vertical type of size 100 mm complete all as specified and directed. 64 Supply and Fix Cylindrical lock of round shape having backset of 60 to 70 mm made of stainless steelwith key of push button controller typescratch-resistant & corrosion-resistant stainless steel SS304 for greater strength and durability all as specified and directed. 65 Supply and Fix keyless Cylindrical lock of round shape having backset of 60 to 70 mm made of stainless steel of push button controller typescratch-resistant & corrosion-resistant stainless steel SS304 for greater strength and durability all as specified and directed. 66 S & F 150 mm brasshandles,cast type polished bright complete all as specified and directed. 67 S & F 100mm butt hingescast brass with mild steel hinges pin bright polished and fixed complete all as specified and directed. 68 S & F brass barrel tower bolts with cast or sheet barrel and rolledor cast bolts and fixed 150mm for door of extruded section and fixed 69 Dismantling of cast iron or reinforced concrete drain pipes 100 mm diaincluding all bends etc andjointed in cement mortar and taking out of trenches if required complete all as specified and directed. 70 S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement 71 M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as spd. 72 M&L for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as spd. 73 S&F for 110mmPVC (SWR) junction single (single T) equle or unequle with access door all as spd. 74 S&F 110X75mm PVC(SWR) reducer 75 S&F 110mm PVC(SWR) bends 76 Supply and fix powder coated aluminium frame (minimum thickness of powder coating 50 micron)for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 77 S & F Powder coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified . 78 S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. 79 S&F in repairAluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixedto existing shutters of any description. 80 S & F 4 mm thick plain sheet glass ordinary quality fix with bead in squaresn. exc. 0.5 SM in each pane. 81 S & F 4 mm thick frosted type sheet glass ordinary quality fix with bead in squaresn. exc. 0.5 SM in each pane. 82 Supply and fixed in repair fancy type curtain rod 25mm dia with heavy duty brackets, both of SS 304 grade of thickness not less than 1.2mm including stops, rollers etc complete all as specified and directed. 83 Removing old demolished building materials debries etc to a distance exc 1.00 KM and n exc 5.00 KM outside MD land including loading, unloading and stacking at the destination. 84 Supply and fix in repairuPVC box type rain water gutter pipes of width 160 mm, depth 100 , having thickness of minimum 3 mm (4 kg/sqcm auge) with added rib for extra strength, fixed in position with uPVC clamps and mild steel bands, straps ,supports or stays , including uPVC gutter fittings like couplings, running outlet,corner/elbows (of desired degree), end drops, end caps, corner drop/elbow drop, leaf guard etc complete all as specified and directed by Engr-in-Charge. Note:- Rates for uPVC fittings to be used like centre drop, end drop, elbow drop and mild steel works for strengthening etc to be deemed included with the quoted rates of the contractor.Make Euro guard or equivalent 85 Supply and fix in repair uPVC square/rectangular /circular type rain water pipes of 90 mm or above, having thickness of minimum 3 mm (4 Kg/Sqcm auge) fixed in position with u PVC clamps and mild steel bands, straps, supports or stays, including all u PVC fittings necessary like couplings, elbows end caps etc all complete as specified and directed by Engr-in-Charge. Note :- Rates for uPVC fittings to be used like centre drop, end drop, elbow drop and mild steel work to be used for strengtheningetc to be deemed included with the quoted rates of the contractor.Make Euro guard or equivalent 86 Supply and fix in repair overhead showers 200x200mm square shape single flow (ABS body Chrome plated with Gray face plate) with Rubit cleaning system including stainless steel connecting pipe of 450 mm in length complete all as specified and directed. Make : Jaguar (Code NoOHS-CHR-35497 or equivalent ) 87 Material and Labour for Treating the top surface of filled earth/concrete floorat the rate of 5 litres of emulsion of anti termite per square metre of surface area all as specified and directed by engg in charge 88 Material and Labour for Treating the soil with anti termite emulsion along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall of the bldg all as specified and directed by Eng in Charge 89 Supply and fixing offrameless shower enclosure with toughened glass of 10mm including brass hinges, dye casted brass conncetors, 8 inch vertical handle , 18 inch horizontal handle with silicon magnetic seals , supported on stainless steel rods and other connected accessories all complete all as specified and directed. 90 Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings. 91 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.Note:The Galvalume sheet is fixed by cutting the grooves at the end as per requirement in site. 92 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 93 M&L Dismantling wrought iron or mild steel work of any description as per direction of Engineer In Charge 94 S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250)quality A 95 M&L for preparation of new steel surfaces of any description not other wise described over 10cm width or girth and applying two coat (finishing coat) of synthetic enamel paint over a coat of primer complete all as specified and directed. 96 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for a shafts, wells, ceasaspitas, manholes, pier holes, etc. n exc 10 a sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock complete all as aspecified and directed. 97 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the a starting point complete all as specified and directed 98 M&L for brick work with fly ash bricks straight or curved on plan n exc 6m mean radius built in old size brick in CM 1:6 complete all as aspecified and directed 99 M&L for cement concrete type 1:3:6 type C 2 using 40mm graded stone aggregat as in drains, surface chaneelsand like including waethering,slightly rounded or chamfered angles and provision of necessary formwork complete all as specified and directed. 100 S & F for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe 410 -W (GdeE- 250)quality A 101 S&F in repair stop valves 20 mm bore pipe chromium plated fancy type with long shank and cup concealed type, screwed down, high pressuere with crutch or butterfly handle screwed both ends complete all as specified and directed. 102 S&F in repairsink cock20 mm bore pipe chroumium plated fancy type with crutch or butterfly handle,complete all as specified and directed.Make : Jaquar (Code NoFLR-CHR-5347N) or equivalent. 103 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 including rounding of edges whereever reqd all as specified and directed by Engg-in -charge. 104 S&F in repair Kitchen cabinets consisting SS drawer baskets in required sizes (min height above platform/floor 0.90 m and min width 0.60m) made out of 18 mm thick laminated WPC board on front face and consisting of white carcasses of 18 mm thick WPC board on other sides (carcass will consist of faces on all sides i.e. top, bottom, sides and back). The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thick edges bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed by Engr-in-Charge. Note :- Quoted rate deemed to included the cost of all necessary fittings like SOSS hinges of required size invisible type and handles etc. Measurement will be given for front face. Quoted rate deemed to be included the cost of of side, back, top and bottom panels and necessary locking arrangements etc. Size of cabinet near sink will be adjusted as per site requirements. 105 S&F in repair Kitchen cupboards in required sizes (Depth 610 mm) made out of 18 mm thick laminated WPC board on front face as shutters and consisting of white carcasses of 18 mm thick WPC board on other sides (carcass will consist of faces on all sides i.e. top, bottom, sides and back). The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thick edges bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed by Engr-in-Charge. Note :- Quoted rate deemed to included the cost of all necessary fittings like SOSS hinges of required size invisible type and handles etc. Measurement will be given for front face. Quoted rate deemed to be included the cost of of side, back, top and bottom panels and necessary locking arrangements etc. 106 S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedall 20 mm CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferruleall as specified and directed. 107 Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings,etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. 108 M & L for point wiring with 1.5 sqmm (nominal cross sectional area) single core pvc insulated ,unsheathed FRLSH copper cable ,1100 Volt grade with multi stranded copper conductor drawn through and including non-metallic ,rigid non metallic PVC conduit (medium grade) concealed in walls /ceiling with and including 1.5 sqmm single core PVC insulated multistranded ,unsheathed FRLSH copper conductor cable as continous earth continuity conductor (green in colour) with cast Iron/ Pressed Steel modulur terminal boxes any size/module,concealed on walls and fixed by means of brass screw including modular white cover plates and cover frames any size /module and blanck plates, for mounting or housing switches ,socket outlets, fan regulators etc incl all other fixing accesories for one light/fan/exhaust fan/call bell point controlled by one 5/6 Amps switch complete including making good of wall surface by cementing/plastering complete all as specified and directed. 109 (a) One light point controlled by one way switch. 110 (b) One fan point controlled by one way switch and one regulator. 111 (c) One Exhaust fan point controlled by one way switch. 112 (d) One 3 pin switch socket point outlet 5A on independent board. 113 (e) One 3 pin socket outletpoint 5A on same board with other switch 114 (f) One bell point controlled by one bell push. 115 All as per item No. 02 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC- FRLSH insulated copper earth continuity conductor to common earth. 116 S & F modularSwitch 1 way6 Amp, 1 module. 117 S & F modularSwitch 1 way16 Amp, 1module. 118 S & F Modular Bell push 6A 1 module 119 S & F modularSocket6A-2/3 pin combined 2 module. 120 S & F modularSocket 6A/16A -2/3 pin combined 2 module. 121 S & F modularfan regulator 120 W - 2 module. 122 S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block complete all as specified and directed 123 S & F Rigid non-Metallic Conduit 25 mm dia exclusive of boxes (junction/terminal) but inclusiveof all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including Fixing of LAN/submain wiring cable inside the Conduit 124 S & F Non Metallic Junction/Terminal Boxes(1 to 4 way) of 25 mm size concealed in walls 125 S & F for Modular type Television socket outlet for connection of dish Complete all as specified and as directed 126 S & F door bell, ding dong type, AC 230 Volts single pole 127 Fixing only, connecting and testing energy meters including all accessories with taking down old serviciable energy meter 128 Taking down carefully sub main wiring including aluminium conductor of any size / GI earth continuity conductorand making good disturbed surface all as directed. 129 Material and labour for concealed sub main wiring withFRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 6 Sqmm in PVC conduit of 20/25 mm and one run of 6.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete 130 Material and labour for concealed sub main wiring withFRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 4 Sqmm in PVC conduit of 20/25 mm and one run of 4.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete 131 Material and labour for concealed sub main wiring withFRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 2.5 Sqmm in PVC conduit of 20/25 mm and one run of 2.5 Sqmm copper earth wire including all necessary connections and fixing arrangements complete 132 Material and labour for concealed sub main wiring withFRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 1.5 Sqmm in PVC conduit of 20/25 mm and one run of 1.5 Sqmm copper earth wire for inverter Conection including all necessary connections and fixing arrangements complete 133 Supply and fixing for LED luminaire 600 mm x 600 mm, square LED Panel 36 Watt ,lumen output >= 110 lumen/watt , 220 V AC Ceilingmounted type with high effeciency PMMA diffuser soft glare free light complete with driver holder, LED lamp suitable for roof/false ceiling ,including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Eng-in- Charge 134 Supply and fixing LED lights fitting 1x 20W,lumen output >=120 lm/watt, 220V, Aluminium extructed AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed 135 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V Aluminium extructed decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 136 Supply and fix lamp holder insulated body suitable for batten fitting white finish complete all as specified and directed. 137 Supply and fix LED bulb of 15/18 watt all as specified and as directed. 138 Supply and Fixing LEDbuilding security light fitting 30watt 230 V AC outdoor type with hight pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. 139 Taking down with dismantling Main Switches/DB with MCBsall as specified and directed 140 Supply and fix sheet metal enclosure double door, vertical type for DB’s when MCCBs to be used as incomer including MCCB 100 Amp triple pole and neutral 4 waysIP 43,IK 09, 415 volts with 200amps rated bus bar fixed sunk/ flush to wallby cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.Note:- The space left after inserting MCB should be properly filled with blanking plate 141 Supply and fix SPN 8 way double door metallic sheet metal enclosurefor DB when MCBs to be used 240 Volts with 100Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including blank plate complete all as specified 142 Supply and fix40 Amp ,415 Volt ,10KA capacity C Curve miniature Circuit Breaker connected with suitable lugs including testing and commissioning complete all as specified and as directed. 143 Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. 144 All as per Item no. 31 above but SPN 32 Amp 145 Supply and fix sheet metal single pole and neutral enclosure for 2 pin and earth plug and socket for incorporating and including 20 Amp MCB SP including removing the old one complete all as specified and directed. 146 Taking down ceiling fan, of any size including blade in any positionincluding re-fixing where directed including provision of 3 coreflexible cable of suitable size,and cleaning, greasing where required and testing after completion all as specified and directed. 147 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 250mm including making opening,Civil work , painting etc. all as specified and directed by Eng-in-Charge. 148 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete making opening,Civil work , painting etc. all as specified and directed by Eng-in-Charge. 149 Supply and fixingof GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. 150 Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. 151 Supply, Laying, fixing, jointing and testing of LT under ground XLPE insulated,,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core with electric connection with suitable size of lugs, laid in trenches/ under floor or fixed naked with walls/ on poles/ in ducts/ in GI pipes etc. (Note- (i) Excavation, earth work, sand cushoining protection bricks/ tiles/ block, clamps, nuts, bolts, washers and pipe shall be measured and paid seprately.) 152 Excavation in trenches not exceeding 1.5 m wide and exeeding 1.5 m in depth and getting out hard dense soil for pole excavation as directed by Engineer-In-Charge. 153 Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge. 154 Supply and laying Gl pipe light grade 40 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed. 155 Supply and Laying DWC HDPE pipe of outer dia of 40mm and inner dia 32mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed. 156 Supply and Laying in trenches galvanised steel water tubing of medium grade with and inclding all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as requierd at site, laid in trenches including dismantiling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed Note:- (i) Excavation and earth work shall be measured and paid separately under relevant item of Sch A(ii) The rates quoted inclusive of cutting, jointing and testing of the pipe (iii) All other fittings requierd shall be provided by the contractor at his own cost. 157 GI tube ofbore 25 mm dia 158 GI tube ofbore 20 mm dia 159 S&F Gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling of old unserviceable gate valve fixed at any location all as directed all as directed for the following sizes :- 160 25 mm (1”) dia 161 20 mm (3/4”) dia
|
