|
Tender For Addition Alterations Towo Status Smqs At Af Stn High Ground.; 1 Building Works 2 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed 3 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed 4 Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each &refixing the same opening after easing & adjusting 5 Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each and removing from site all as specified. 6 Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 125mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, with and including 25mmx 50mm MS tube 2mm thick stopper welded to chowkhat, and including cement concrete 1:2:4 (type B0) with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed. 7 Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, with and including cement concrete 1:2:4 (type B0)with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed. 8 M&L for plain cement concrete (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts,filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed. 9 S & F Factory made single rebated extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete as per direction of Engineer-in-Charge. 10 Cutting holes in brick walls exc half brick but n exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required 11 S&F rolled mild steel Fe-290 (Ged E-165) framed work as in door or gate of angle or other section with gusset plate, rail, braces etc, Complete drilled for fixing of steel sheeting or other coverings, doors, etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails, guides) and hanging also fastering & fixing complete all as specified and directed. 12 S&F Mild steelplain black sheet 1.00mm thick but in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, cloutnails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required 13 Supply and fix, factory made flush shutters 35 mm thick,solid core construction with block board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, complete all as specified & directed. 14 S&F factory made Second class hardwood glazed and skeleton door shutters on35mm thick, in three equal penals open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete, complete all as specified. 15 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of size 30 MM thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 16 S&F in repair18/19 mm thick Prelaminated particle, board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete alll as specified 17 S&F Factorymadeboxtypesteelwindow with pintlehinges&2Nos150mmmildsteeltower boltstoeachshutter,steelhandleandwithout glazingbars,includingflatiron12x3mmfor securingwiremesh,dovetailedorweldedand withoneshopcoatofzinc chromateprimer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2. 18 S&F Factorymadeboxtypesteelwindow with pintlehinges&1Nos150mmmildsteeltower boltstoeachshutter,steelhandleandwith glazing bars,dovetailed or welded and with one shopcoatofzincchromateprimercompleteall asspecifiedandshownonDrawingNo CEAF/STD-185-2012 Sheets 1/2 & 2/2. 19 Mild steel framed work such as grills, gratings, etc with ends ofbars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. 20 S&F spring for doors 300 mm mild steel ordinary rat tail rod pattern spring including roller & roller plate, complete all as specified and directed. 21 Supply and fixing, stainless steel wire mesh IN REPAIR , 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. 22 Supply and fixing, stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. 23 S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane all as specified. 24 Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out oldglazing pins/spring clips of any area. 25 S&F 100mm stainless steel butt hinges, with stainles steel hinge pin & fixed to WPC 30 mm thickdoor using stainless steel screws complete all as specified & as directed. Make Prayag Cat part No-PHW-38 26 Supply and fixing double leggedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified 27 Supply and fixing IN REPAIR double leggedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified 28 S&F 100mm size Stainless steel Hasp and staple, safety type for shutter, with mild steel hinge pin including bolt to hinge plate and fixed with screws. 29 Supply and fix 150mm sizealuminium handle cast type pressed handle Ovel type ISI marked, complete all as specified and directed. 30 Supply and fix 100mm sizealuminium handle cast type pressed handle Ovel type ISI marked, complete all as specified and directed. 31 S&F, 100mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 32 S&F, 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 33 S&F, 200mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 34 S&F contineous (piano hinges, mild steel, with width of flaps30 mm when open, bright finish or electrogalvanised 35 S&F 300 mm long stainless steel Heavy duty, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete all as specified and directed by Engr in charge. 36 S&F Door seal strip with plastic beading suitable for doors of all widths, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. 37 M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified. 38 M&L for preparation of new surfaces ofsteel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 39 S&F MS Chroumium plated curtain rod 25 mm diawith and incl MS Chromium plated decorative round funnals on either end and provide a visually balanced appearance incl MS Chromium plated brackets fixed to wall with 30mm wooden steel screws and PVC rawal plug anchors and installation as fised in repairs complete all as specified. 40 M&L for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as hand rails and windows etc., complete all as specified and as directed. 41 M&L Brickwork with sub class Bbricks (EXCEPT BRICKS), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), using old size bricks, and including demolition etc complete all as specified. 42 M&L Brickwork with sub class Bbricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), using old size bricks, and including demolition etc complete all as specified. 43 M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such aschajja,beams, roof projection, balcony, mumty and staircase flight ceiling, roof slab etc.) finished even and fair without using extra cement, complete all as specified and directed by Engineer - in -Charge.NoteThe rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. 44 M&L preparation of new plastered surfaces of walls and apply two coats of water based acrylic distemper over a coat of primer incl wall care putty of interior grade upto 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed. 45 Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc of any description and any position, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 46 M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified as per directed (Internal plaster). 47 M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified (External plaster).Note:- The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. 48 Material & Labour for applying of new plaster external surface of wall Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 1mm thick wall care putty of new plaster and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered of any description 12M upto G+2 building, including necessary scaffolding, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer. 49 Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 50 Demolition of cement concrete as in roof pading ,anythickness andany descrition upto RCC roof slab ,cleaning the surface including flashings and junction of parapers, etc with wire brushes and water to the entire satisfaction of Engineer -in -Charge including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 51 M& L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm gradedstone aggregate) in plinth protections, finished even andwithout using extra cement including forming of construction joint @ 2.5 meter Centre to centre & corner & filled with bitumen (80/25) and sand in ratio of 1:6 etc Complete all as specified and directed. 52 Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed. 53 Demolition floor, health or wall tilling including cement mortar bedding (but not backing removing survicabletiles to store and rubbish including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 54 M & L forglazed ceramiccoloured tiles 450 X 300 X 7 to 8 mm thick on vertical surfaces/dado skirting joint free, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, Complete all as specified and directed . 55 M & L for Granite (of any type ) 16 to 18 mm thick, work (table rubbed and polished) fine grained Z black/red incooking platforms/Jambsincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4, complete all as specified. 56 M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. 57 M&L First quality, Non skid ceramic coloured tiles laid in floors, (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11Sq.m, 7-8 mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cemen0t with pigment to match the shade of tiles, complete all as specified and directed. 58 M&L First quality, Non skid ceramic coloured tiles laid in floors, joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.38Sq.m, 8 to 10mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cemen0t with pigment to match the shade of tiles, complete all as specified and directed. 59 M/L Machine cut Pre-polished Kota stone slab flooring 18-20mmthick as in floor, treads of stairs case over 15mm thick cement screed of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab complete.Note : (Kota stonefixed in staircase tread shall besingle piece having 03 Nos of grooves in tread of stair case as directed by Engineer-in-Charge). 60 M/L Machine cut Pre-polished Kota stone slab 18-20mm thick as in vertical surface, riser of stairs case over 10mm thick cement screed of cement mortar 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slabas in risers of steps, skirting, dado etc complete.Note : (Kota stone to be fixed in staircase Riser shall be of single piece) 61 Providing precast cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in landings cover slabs underbracket manholes, chullah hood, chajja, water trough, shelves and similar atrticles etc. (of any section indicated), with plain fair faces, includingchamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete all asspecified and as directed. 62 Demotion cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided any thickness and any length etc 63 M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. all asspecified and as directed. 64 Demolition Brick/PCC tiles or terracing tiles, single layer on roofs, etc compelete all as specified and Directed 65 Taking down existing bitumen feltroof treatment,chiseling existing bituminous coating , roughning the surface completely, cleaning and washing down with water to remove dust and rubbish off the premises to a distance exceeding 150 meter and not exceeding 250 meter complete all as specified. 66 Material & labour cutting out cracks to effected portion mechanically of minimum width 5mm and depth equal to width in existing RCC roof parapet or terracing, cleaning out and apply Dr Fixit PU sealant (Make : Pidilite or Equivalent of make specified herev in after) complete all as specified. 67 M&L forcement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregateas padding in rooflaid to maintain the slopeproviding leveling bench mark at ridge level and up to edges with distances as directed by Engineer in Charge. 68 Supply, laying and fixing 2mm thick FOSROC proofex ORG over minimum 200 GSM TPO (Thermoplastic Polyolefin) waterprofing membrance on prepared surfaces of roof and upto 300mm on parapets and cumple joints including junction of roof and parapet of make Geotextile or Asian Paint or any fully compatible material of makes specified here-in-after. Note :-The work of water proofing to roof and sunken portions shall be executed by the manufacturers authorized trained/skilled applicator as per technical guidelines issued by the manufacturer. A MOU is to be executed between the contractor and manufacturer and the same will be got approved from the GE/AGE (I) before commencment of work.The Contractor will arrange to provide company back guarantee for the water proofing work for the period specified here-in-after. 69 S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete including taking down old unseviceable all as specified and directed. 70 S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors,including taking down old unseviceable complete all as specified. 71 S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2 with, single socketed in any length with rubber ring joints fixed to wallincluding holding holder /clamps and making good the mouth of rain water/drainage pipe including taking down as directed complete all as specified. 72 S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2 with, single socketed in any length with rubber ring joints fixed in floorincluding holding holder /clamps and making good the mouth of rain water/drainage pipe including taking down as directed complete all as specified. 73 S&F PVC (SWR) pipes 75mm dia of pressure rating 4 kgf / cm2 ofdouble socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 74 S&F PVC (SWR) pipes 75mm diaof pressure rating 4 kgf / cm2 ofdouble socketed, in any length with rubber ring joints, fixed in floors complete all as specified and as directed. 75 S&FPVC (SWR) bends 110mm dia any radius provided with access doorall as specified and directed. 76 S&F in repair 110mm bore PVC (SWR) Bends (any radius), diminishing pieces or tapers (larger bore measured) ISI marked,complete all as specified and directed by Engineer-in- Charge. 77 S&FPVC (SWR) bends 75mm dia any radius provided with access door as specified and directed. 78 S&F PVC (SWR) junction single, (single T)110mm dia any radius provided with access doorall as specified and directed. 79 S&F 75mm PVC Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchesfor fix in WC and floor trap 80 S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. 81 S & F in repair PVC floor trap 75m dia with grating (with/without hole as reqd) incl jointing with solvent cement,complete. 82 S&F in repairPVC gully Trap 125mm setting and jointing with solvent cement 83 S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. 84 S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste (PTMT Coupling) fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new bracketscomplete all as specified and directed. 85 S&F in repairs VitreousChina wash down water closet with plastic seat cover (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including 100mm certifugal cast iron (Spun)P & Strap and 100mm centrifula cast iron (spun)sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete all as specified and directed. 86 S&F in repairs Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 87 S & F 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. 88 S&F in repairs 2-Way Bib Cock Double Handle with Wall Flange cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. Make - PrayagCat No. 6512 or equivalent cat part of makes specified here-in-after. 89 S&F in repairs bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. 90 S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. 91 S&F in repairs looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified and directed. 92 S & F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® 18278 Complete all as specified and directed by Engineer-in-Charge. (Make: Prayag/Nirali) 93 M&L rotational moulded PVC, triple layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed theard pettern top cover), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc,including all valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore and dismantling unserviceable PVC water tank complete all as specified and directed. 94 M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying with one coat of 1mm average thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats ofAcrylic Distemper, complete all as specified and directed. 95 M&L for preparation of plastered or un-plastered old decorated surfaces of ceiling,and applying one coat of white lime wash on ceiling complete all as specified and directed by Engineer-in-charge. 96 M&L for complete removal of existing treatment and preparing plastered or unplastered old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with exterior wall care putty to rubbing down and stoping of surfaces using sand paper and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces of any description complete all as specified and directed. 97 M&L for preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed. 98 M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed. 99 S&F in repair Brass chromium plated shower rose 125mm with shower arm 15mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union complete all as specified and directed. 100 S&F in repair Brass CP central hole wash basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold waterfor 15mm bore iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Make- Prayag Cat Part-9350N or compatible model of makes specified here-in-after. 101 S&F Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel (31X30X10 Inches)as approved by Engr in chargeMake- Prayrag Cat Part No- PSP-5 or compatible model of makes specified here-in-after. 102 Preparation of newplastered surface in ceiling and applying three coats of white washcomplete all as specified and directed. 103 M&L for cement concrete (1:5:10), type E-2, using 40mm graded brick aggregate, as in sunken portion/sub base, complete all as specified and as directed. 104 Supply and fixing 25mm thick solid core construction with block board core and plywood face panels commercial on both side 105 M&L for water proofing treatment to sunken portions by clearing the sunken/lowered portion of RCC slab surface for full depth of sunken portion, chieseling out the sticked mortar and applying FOSROC Nitoproof 600 PF (minimum 0.8 mm dft) over a priming coat of Nitoproof WB Primer or equivalent product of makes specified here-in-after and applied to bottom and full vrtical sides as per manufacturers instructions.Note:- (a)All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out. One No. 50mm dia, 35cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken protion.(b)The sunken portion will be filled with water for dampness and seepage check. In case the slight indication of seepage/leakage is noticed, the same shall be rectified by injectting / grouting to seal all cracks withapplication of Plymer modified mortar FOSROC nitobond SBR orequivalent product of makes specified here-in-afterwith integral WPC or cementitious crysatlline waterproofing compound in the affecrted raea to seal all cracks and micro cracks at his own cost and nothing extra will be admissible on thgis ground. (c)An additonal coat of FOSROC Nitoproof 600PF or equivalent product of makes specified here-in-after shall be applied to all junction points of side walls where CI/GI pipes are passing and the same will be seeled with epoxy cement mortar. 106 S&F in repairs towel rail 600 mm long, 20 mm dia, ‘D’ type,chromium plated, fixed to walls with screws and plastic cleats, complete all as specified and directed. Make-Prayag SS Towel Rail Cubix Cat No. CPA-46 107 M& L for 25 mm average thick Cement concrete type B-0, 1:2:4 (using 12.5 mm gradedstone aggregate) levelling course finished even andwithout using extra cement etc Complete all as specified and directed. 108 S&F Steel water tubes, 50 mm bore, light grade, galvanized, as in spoutfor sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed by Engineer - in -Charge. 109 S&F in repair Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed. Make- Prayag Cat Part-7375N. and equivalent make. 110 S&F in repair PVC waste pipe flexible for Sink/ WHB of 32mm size complete all as specified and directed. 111 S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs as approved by GE/Engineer in Charge, complete all as specified and directed. 112 S&F soap dish brass, chromium plated fancy type of standard size and specification as directed and fixed to plugs with chromium plated brass screws. 113 S&F angle cock cast copper alloy, chromium plated, fancy typr screwed down, high pressure with curtch or butterfly handles, screwed both ends for 15mm bore iron pipe or for brass ferrule fixed in repair/replacement complete all as specified. 114 Material and labour for 10mm thick rendering in CM 1:3 on surface (edges of chajjas roof, projections and similar work over 10mm thick dubbing out average on irregular face of walls) in two layers, finished the surface even and smooth without using extra cement, including taking down loose/damaged concerete from the surface.Note :- The cost of providing double scaffolding and necessary shuttering is deemed to be inluded in the unit rate quoted and nothing extra will be admissible. 115 S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprisesof glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3(i)Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (ISI Marked)(iii) MS Tower bolt 150mm long-02 Nos per leaf (ISI Marked)(iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf(v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 8mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately. 116 M & L forfirst quality, non skid ceramiccoloured tiles of approved shade, 7 to 8 mm thick as in skirting set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. 117 INTERNAL ELECTRIFICATION 118 Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings, bell, security lights etc., removing materials from site and making good the disturbed surfaces of walls,ceilings etc. 119 M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding med grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceilingand incuding provision of 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making goodthe disturbed surfaces as per existing for for one light/fan point controlled by one switch complete all as per specified and directed. 120 All as per description of item No 119 here-in-after but for one socket outlet point5 Amps on same board complete all as specified. 121 All as per description of item No 119 here-in-afterbut for one socket outlet point5 Amps on independent board. 122 M&L for Point wiring with 2.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceilingand incuding provision of 2.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken boxes or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making goodthe disturbed surfaces all as per existing for for one socket outlet point15 Amps on independent board complete all as per specified and directed. 123 All as per description of item No 119 here-in-after but for one light point controlled by two 2 - wayswitchs complete all as specified 124 All as per description of item No 119 here-in-afterbut for one bell point controlled by one bell push complete all as specified . 125 Supply and fix switch piano 6 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 126 Supply and fix switch piano 16 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 127 Supply and fix socket outlet 3 pin 6 amps 230 volt AC flush type complete all as specified. 128 Supply and fix socket outlet 2 in 1,3 pin 6/16 amps 230 volt. flush type complete all as specified. 129 Supply and fix bell push 5 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 130 Supply and fixing in replacement door bell electric , ding dong type, single phase 230 volts, complete all as specified. 131 Supply and fix ceiling rose3 phase/PVC/polycarbonate, isolated body complete all as specified. 132 Supply and fixing LED lights fitting 1x 20W, 220 V, ACwith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 133 S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified 134 Supply and fixing, LED Decorative box type batten fitting 1x9 W, prewired suitable for retrofit LED tubes, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge. 135 Supply and fixing in replacementLED bulb 9/10 watts complete a specified and directed. 136 Supply and fixing fan regulator electronicstep type (socket type), 250 volts, AC supply suitable for ceilling fan of any type/make/sweep 137 Supply and fix lamp holder PVC /polycarbonate type with back plate. 138 Supply and fix exhaust fan steel body complete with louvers shutter, voltage 230V, 50 Hz, single phase, Min. 1200 RPM, Copper winding of sweep 300m connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, incl making hole in wall and make good as existing incl dismantling and taking down old unsv completeall as specified and directed. Note: Old unsv exhaust fan will be diposited in MES store yard. 139 Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers.Old exhaust fan will be deposited to the MES. 140 Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat , NRV, connection piece etc. Note: Old unsv Geysers will be deposited in MES store yard. 141 Supply and fix RCBOs for earth leakage, overload and short circuit protection double pole 30 mA current rating 25/32 Amps 230 volts, 50Hz , breaking capacityall as specified and and as directed. 142 Supply and fix MCB TPN/FP 415 volts, 50Hz , breaking capacity 10KA, B curve 40A to 100 A, ISI marked all as specified and as directed. 143 Supply and fix MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked all as specified and as directed. 144 Supply and fix MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 32 A, ISI marked all as specified and as directed. 145 Supply and fixing Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB/TPas incomer and MCBs SP/TP as outgoing as per IS - 01 No,having IP-43 protection, complete all as specified and directed. 146 Supply and fix sheet metal enclosures distribution board SPN 12 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable forMCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface all as specified and directed. 147 Material and labour for earthing complete with GI earth plate electrode of size 60mm x 60mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5 m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using earth lead wire 4 mm (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 15 mm bore, and watering pipe 20 mm bore GI light grade pipe with funnel & wire mesh,including all necessary excavation & earth work,PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion complete all as specified and as directed.Note(s) :-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm.(ii)PCC chamber shall be constructed 500 mm away from the edge of earth pit.(iii) Rate shall include GI strip and protection pipe of length 7.5m, GI pipe beyond 7.5m length required at site shall be measured and paid separately.(iv)Earth resistance should be less than 2 Ohm. In case the test results are not found below 1 Ohm, complete earthing will be redone without any extra cost to Govt. 148 Material and labour for sub main wiring with two single core PVC insulated ,unsheathed stranded copper conductor cable FRLSH 6 sqmm drawing in concealed conduit not less than 25 mm dia with accy and making good the disturbed surface incl one additional PVC insulated , strandedcopper conductor FRLSH of 6.0 sqmm, green colour for earth continuity conductor incl taking down of unsv sub main wiring complete. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. 149 Supply and fix in repair sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA,oe complete all as specified and directed . 150 Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLSH PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. 151 Taking down carefully ceiling fan of any size and hanging to same or other location after claening thoroughly complete all as specified. 152 EXTERNAL ELECTRIFICATION 153 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified 154 Disconnecting & taking out defective underground cableany size and any type from trenches, pole, pipe, floor, wall etccomplete all as specified and directed. 155 Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 25.0 sq mm 4.0 core incl thimbles/lugs and connection complete all as per specified and directed.Note: Earth work and HDPE pipe will be measured and paid separately under relevent items. 156 Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and as directed by Engineer-in-Charge. 157 Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge. 158 Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge. 159 Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) or road cutting, pole coping complete all as specified and as directed. 160 M&L for cement concrete (1:3:6) type C-1using 20mm graded stone aggregate cast-in-situas mass filling and coping of pole and strut, stayaround the pole , road cutting etc all as specified and directed. 161 Supply & fixing or laying in replacementHDPE (DWC) pipe of outer dia not less 50 mm fixing on poles, walls, under floors, road, drain crossing, laying on surface etcas reqd at site and as per direction of Engr-in-Charge..Note: All items and accessories , bend, joints, nut bolts, clamps etc are measured andpaid separately under relevent items.
|
