|
Certain Misc B/R Repairs, periodical services, compound wall, area drainage, sewage system in CDA Residence bldgs, TCEC guest house, office complex of CDA Chennai and flats located at TIASHA Housing complex in Virugambakkam under GE Chennai.; 1 M & L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed. 2 M & L for preparation of old decorated plastered surfaces of wallsand applying two coats of white wash complete all as specified and as directed. 3 M & L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. 4 M & L for applying one coat of Oil Bound Distemper on wall including washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed. 5 M & L for complete removal of existing treatment on walls surfaces and applying two coat of oil bound distemper over a coat of Alkali resistant primer using chalk whitening primeretc.,complete all as specified and as directed. 6 M & L forcomplete removal of existing treatment on walls surfaces applying two coats of Oil Bound Distemper over a coat of primer including applying plaster of paris putty of 1mm thick complete all as specified and as directed. 7 M & L for complete removal of existing treatment including preparation of old decorated external surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex of Asian or equivalent of other specified makes) over a coat of exterior sealant and white primer complete all as specified and as directed. 8 Material and labour for applying onecoat ofWeather Proof Acrylic Exterior Emulsion Exterior grade paint of approved shade,on old plasteredexternal surfaces of walls including preparationcomplete all as specified and as directed. Make : Apex of Asian/ Weather coat of Berger / Extra of Shalimar 9 M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description exceeding 10cm width or girthcomplete all as specified and as directed. 10 M&L for applying one coat of synthetic enamel paint including preparation of old painted steel surfaces of any description exceeding 10cm width or girthcomplete all as specified and as directed. 11 M & L for preparation of old surfaces of any description over 10cm in width or girth and applying one coat of varnishing with synthetic varnish over a coat of thin varnish or lacquer or shellac varnish complete all as specified and as directed 12 Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manhole, sewage line etc., not exc 10sqm on plan and n.exc 1.5m in depth and getting out in Hard /dense soilcomplete all as specified and as directed. . 13 Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms insoilcomplete all as specified and as directed. 14 Removing excavated material / soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completecomplete all as specified and as directed. 15 Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mmcomplete all as specified and as directed. 16 Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 150 mmcomplete all as specified and as directed. 17 S & F PVC (SWR) pipes 150mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed. 18 S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed. 19 Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and as directed. 20 S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and as directed. 21 M & L Precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set in cement mortar 1:6 as in manholes cover slabs / OHT base slab on roof including demolitionofold cover/base slabs complete all as specified and as directed. 22 M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I)complete all as specified and as directed. 23 Cleaning of septic tank and sumps by bailing out fluid including removing of sediments, sludge etc.,by usinghoney sucker/sewage suction machine complete all as specified and directed. 24 Roding the existing sewage pipe line of 100mm bore between manholesand removing all foreign materials and sludge completely from the pipe line by mechanical means and making serviceable for free flow of sewagecomplete all as specified and as directed. 25 All as per item No.24 above, but for 150mm bore pipecomplete all as specified and as directed. . 26 Cleaning of blocked / soaked manholes of any depth including removal of sludge/dirt etc.,by using mechanical means to a distance outside ofMoD land and washing wall/floors surfaces with fresh water including removing and re-fixing the existing manhole cover slab without damage complete and all as directed. 27 Desilting of covered drains/culverts of any size and depth including removal of mud/soils/grass and removal and refixing of cover slabs etc on drain/culvert and disposal of spoil to outside the MD landcomplete all as specified and as directed. 28 Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work including removal of rubbishcomplete all as specified and as directed. 29 M&L for Brick work with Fly ash bricks straight or curved on plan exceeding 6 metre mean radiusbuilt in CM 1: 6 all as directed and as specifiedcomplete all as specified and as directed. 30 Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4)complete all as specified and as directed. 31 M&L for granite slab (of any type) 18 - 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar 1:6, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting and polishing etc., complete all as specified and as directed. 32 Rounding to edges of stone slabs, such as insteps, cooking platform, and other similar situationscomplete all as specified and as directed. 33 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc.,complete all as specified and as directed. 34 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. 35 S & F in repairs aluminium powder coated sliding window using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws andfixed along with same sectionin three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc(The rate is inclusive of all fixings of builders hard ware such as wire mesh hinges, bow handles, locking arrangements etc complete all ascomplete all as specified and as directed. 36 S&F in repairs aluminium powder coatedventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louversaluminium anodised snap beads, screws andfixed along with5mm thick frosts/pin headed glass fixed with glazing clips, and one for wire mesh shutter fixed on frame etc(The rate is inclusive of all fixings of builders hard ware such as wire mesh hinges, bow handles, locking arrangements etccomplete all as specified and as directed. 37 S&F in repairs powder coated Aluminium section partition of 50mmx50mm cross section and 1mm thick with 12mm thick prelaminated particle board of exterior grade on both side decorative laminations fixed with sash bars aluminium anodised snob beads, screws and aluminium partition doors shall be fixed along with partition wall on same section but partly glazed with 5mm thick glass fixed with glazing clips, etc complete all as specified and as directed. Note: (The rates is inclusive of all fixings of builder hard ware such as hinges, bow handles, etc) 38 S & F in repairs powder coated of any colour aluminium (minimum thickness of powder coating 50 micron) door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber neoprane packing handles 02 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and as directed 39 Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone concrete or brick surrounds gazed with putty or fixed with beadscomplete all as specified and as directed. 40 S& F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beadscomplete all as specified and as directed. . 41 S & F figured glass 4.0mm thick, pin head type and glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beadscomplete all as specified and as directed. 42 S & F Sheet glass 4.0mm thick, ordinary quality & glazing with beads fixed with metal panel pins in square exc 0.5 sq.m in each paneproviding & fixing new onescomplete all as specified and as directed. 43 M & L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, ,rounded or chamfered put together with glue pinned at joints, supplied and fittedcomplete all as specified and as directed. 44 M & L for35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkatscomplete all as specified and as directed. 45 M & L 40 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc.complete all as specified and as directed. 46 S & F inrepair aluminium powder coated designer curtain rods (draw berms rods) 19 mm dia exterior grade, 3 mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and as directed. 47 S & F in repair aluminium powder coatedcurtain rod brackets all assuitable forthe above Aluminiumpowder coated designer curtain rodcomplete all as specified and as directed. 48 Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each including builders hardwarecomplete all as specified and as directed. 49 S & F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastenercomplete all as specified and as directed. 50 S & F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawingcomplete all as specified and as directed. 51 S & F Butt hinges, 100mmsize medium weightcold rolled mild steel etc.,complete all as specified and as directed. 52 S & F Aluminium anodisedbarrel tower bolts of extrudedsection 100mm longcomplete all as specified and as directed. 53 S & F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specifiedcomplete all as specified and as directed. 54 S & F aluminiumhandlescast typeanodised 100 mm sizecomplete all as specified and as directed. 55 S & F aluminiumhandlescast typeanodised 150 mm size complete all as specified and as directed. 56 S & F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. 57 S &F 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawnsteel spring, fixed in floor complete all as specified and as directed. . 58 S & F in repair 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor as in repairscomplete all as specified and as directed. 59 S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all as specifiedcomplete all as specified and as directed. 60 S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel framesfixed in repairs,complete all as specified and as directed. 61 S & Fin repair aluminium (die cast body) door closer hydraulically regulated designation No.1 universal type suitable for door shutters up to 700mm in width and of weight not more than 35 kgcomplete all as specified and as directed. 62 M & L in repairs 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on one faces; fixed with screws to timber frame workcomplete all as specified and as directed. 63 M & L for 0.90mm thick decorative laminates type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturers instruction complete all as specified and as directed. 64 M & L in repair18/19 mm thick pre laminated Particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame workcomplete all as specified and as directed. 65 M & L 18/19 mm thick pre laminated Particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. 66 M & L for 6mm thick external teak wood lipping over plywood fixed with nails complete all as specified and as directed. 67 S&F in repairs stainless steel cabinet hinges/self closing hinge/auto hingecomplete all as specified and as directed. 68 Supply and Fix 4 levers Locks, cupboard shutters grade I, size 75 mmBrasscomplete all as specified and as directed. 69 S& F Multi Rib TM profile high tensile 550Mpa yield strength colour coated Galvalume steel sheet 0.50mm (TCT) thickness as in roof covering including ridges having maximum pitch of 250mm C/C and minimum 30mm crest depth in length as per site requirement fixed with self drilling / self tapping screws with EPDM seal complete al as per manufacturers specification and instruction including taking down existing steel/galvalume sheet/ AC sheet any type along with bracketscomplete all as specified and as directed. 70 S & F anodised aluminium snap grid size of grid 605mm X 605mm frame work for false ceiling including hangers fixed to roof slabs by means of ceiling cleats etc complete, hangers 6 mm dia. G.I. (up to1200mm length) adjusting levelfixed to roof slabs by means ofceiling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners2.5mm dia. 40mm longcomplete all as specified and as directed. 71 M & LGypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions etc.,complete all as specified and as directed. 72 M & L for dismantling wall and ceiling boards any thickness including cover filletscomplete all as specified and as directed. 73 S & F Gl frame work for seamlessceiling comprising of Glperimeter channel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of27 mm fixed to surroundingwall using nylon sleeves andscrews at 450 mm centre to centre /intermediate channel0.9 mm thick having two equalflanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centreto centre with Gl cleat andsteel expansion fasteners withand including ceiling section(not exc 1.2 m length) of 0.55mm thickness having curledweb of 50 mm and flange of26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clipsacross the intermediatechannel at 457 mm centre to centre,hangers 6 mm dia. G.I. (up to1200mm length) adjusting levelfixed to roof slabs by means ofceiling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners2.5mm dia. 40mm long complete all as specified and as directed. 74 M & L for preparingnewsurfaces of ceilings andapplyingtwo coats ofoil bound distemperincluding2 to 3mm thick wall care puttycomplete all as specified and as directed. 75 M & L for providing and fixing 10mm thickplaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire meshany sunk or raised moulding all as specified and directed. 76 M & L2nd class hard wood Plain fillets, square, rectangular or triangular in section, sectional area Exc 6 Sq cm n exec 13 sq cm clean sawn, secured with nails or bradscomplete all as specified and as directed. 77 M & L12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame workcomplete all as specified and as directed. 78 M & L1.5 mm thickdecorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker"s instructionscomplete all as specified and as directed. 79 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tile to storecomplete all as specified and as directed. 80 M & L for Vitrified lightshade ceramic tiles 10mm thick (Square / Rectangle) polished, area of each tiles exc.0.42 sqm butnot exc 1.00sqmin floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layerof mortar 20mm thick CM 1:4 for laying floor finishes complete all as specified and as directed. 81 Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thickCM 1:3 complete all as specified and as directed. 82 M & L for Vitrified lightshade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layerof mortar 20mm thick CM 1:4 for laying floor finishes complete all as specified and as directed. 83 Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thickCM 1:3 complete all as specified and as directed. 84 M & LNon -skidcoloured ceramic joint freetiles7 mm to 8 mm (Square/rectangular) area of eachtilesexceeding 0.11 sqm but not exceeding0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed. 85 Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thickCM 1:3complete all as specified and as directed. 86 M & L for PCC1:2:4 type B0 25 mm thick using 12.50mm graded coarse aggregateas in levelling sub base complete all as specified and as directed. 87 M & LNon -skidcoloured ceramic tiles7 mm to 8 mm (Square/rectangular) area of eachtilesexceeding 0.06 sqm but not exceeding0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layerof mortar 20mm thick CM 1:4 for laying floor finishes complete all as specified and as directed. 88 S&F Coloured Glazed ceramic tiles in vertical surfaces350x250x7mm /450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:3all as specified and directed. 89 M & L for Rendering in cement mortar 1:6, 15mm thick on fair faces of brick work or concrete surfaces andfinished the surfaces even and smooth without using extra cement complete all as specified and as directed. 90 M & L for Rendering in cement mortar 1:6, 10mm thick on fair faces of brick work or concrete surfaces andfinished the surfaces even and smooth without using extra cement complete all as specified and as directed. 91 M & L for Rendering in cement mortar 1:3, 5mm thick on fair faces ceiling surfaces andfinished the surfaces even and smooth without using extra cement complete all as specified and as directed. 92 Takingdown cement plaster on brick work or stone walls etc including racking out of joint, hackingfor key scrubbing down with water etc. complete all as specified and as directed. 93 M & L for Applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed. 94 M & L two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on walls surfaces including preparation ofnew plastered surfaces complete all as specified and as directed. 95 M & L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified and as directed. 96 M & L for applying two coats of Synthetic enamel paintforwooden surfaces over a coat of pink primer including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. 97 M & L forapplying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of new steel surfaces any description exc 10cm width or girth complete all as specified and as directed. 98 S & Fouter dia 16mmto walls/chases/ceilings or laying in floors Polyethylene-Aluminium Polyethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete including taking up (or) down the existing GI pipe complete all as specified and as directed. 99 S & Fouter dia 20mmto walls/chases/ceilings or laying in floors Polyethylene-Aluminium Polyethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete including taking up (or) down the existing GI pipe complete all as specified and as directed. 100 S& F rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Pt-I, 500 Ltr capacity including dismantling existing PVC OHT complete all as specified and as directed. 101 S & Frotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Pt-I, 1000 Ltr capacity including dismantling existing PVC OHT complete all as specified and as directed. 102 S & Fin repair Ball valvehigh pressure of PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed for 20mm bore pipecomplete all as specified and as directed. 103 S & F grating with hole round 125mm size of PTMT (Minimum weight 40gms) fixed in repairs complete all as specified and as directed. 104 S & F 15mm dia Stop valve, cast copper alloy fancy type,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as specified and fixed in repairs complete all as specified and as directed. 105 S & F 15mm dia bib taps, chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as specified and fixed in repairs complete all as specified and as directed. 106 S & Fin repairs15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. 107 Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing fitting i.e., BEA-97 of Make Prayag complete all as specified and as directed. 108 Supply and fix in repairs toilet paper holder with flap recessed type matt chromium plated of make that shall match with existing fitting i.e., BA-38 of Prayag complete all as specified and as directed. 109 S & F in repairs PVC waste pipe for wash hand basin (size 31/32mm x 800mm length) of make that shall match with existing fitting i.e., Prayag Cat No.327 complete all as specified and as directed. 110 S & F in repairs PVC waste pipe for SS Sink (size 38/40mm x 1150mm length) of make that shall match with existing fitting i.e.,Prayag Cat No.330 complete all as specified and as directed. 111 Supply and fixin repair CP wall mixer( 2-in-1) with L Bend (provision for over head shower ) of make that shall match with existing fitting i.e., 8375 ofMake : Prayag complete all as specified and as directed. 112 Supply and fixin repair CP wall mixer( 3-in-1) with (provision for over head shower and hand shower) of make that shall match with existing fitting i.e., 8580 ofMake : Prayag complete all as specified and as directed. 113 S & F In repair 15mm diaangle cock with flange, chromium plated of make that shall match with existing fitting i.e.,8310 ofMake : Prayag complete all as specified and directed. 114 S & F in repair 15mm dia 2wayangle cock with flange, chromium plated of make that shall match with existing fitting i.e.,8311 ofMake : Prayag complete all as specified and as directed. 115 S & F in repair 15mm dia bib cock long body with flange plate, chromium plated of make that shall match with existing fitting i.e.,8308 of Make : Prayag complete all as specified and as directed. 116 S & F In repairTumbler holder with glass of make that shall match with existing fitting i.e., BA-26N of Make : Prayag complete all as specified and directed 117 S & F In repair CP waste coupling heavy (full thread) 40mm for sink of make that shall match with existing fitting i.e., Prayag complete all as specified and as directed. 118 Supply and fix in repair CP overhead shower ABS round with 225 brass arm & flange of make that shall match with existing fitting i.e.,Prayag complete all as specified and as directed. 119 S & F In repairconcealed stop cock regular body 15mm with flange plate, chromium plated of make that shall match with existing fitting i.e., 8318 ofMake : Prayag complete all as specified and as directed. 120 Supply and fix in repair soap dish ,matt finished chromium plated (MCH/Colour) of make that shall match with existing fitting i.e., BA-05 Make : Prayag complete all as specified and as directed. 121 S & F in repair corner glass shelf superior quality matt finished chromium plated (MCH/Colour CP ) with bracket and fittings as per cat No. BEA-44 of make Prayagcomplete all as specified and as directed. 122 Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings of make that shall match with existing fitting i.e., BEA-45 of make : Prayag complete all as specified and as directed. 123 Supply and fix in repair towel ring , chromium plated of make that shall match with existing fitting i.e., BA-11 of Make : Prayag etc complete all as specified and as directed. 124 S & F in repair CP towel rack 600mm long with lower hanger stainless steel,of make that shall match with existing fitting i.e.,Prayag complete all as specified and as directed 125 S & F in repair Towel rail 600mm long CP of make that shall match with existing fitting i.e.,BA-10., of make : Prayag complete all as specified and as directed. 126 Supply and fix Stainless steel plate rack of size 910mm x 910mm x 250mm (36"" x 36 " 10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI 304 of make that shall match with existing fitting i.e., P-350 of make Prayag and fixed in repairs complete all as specified and as directed. 127 S & F in repair 15mm diaCP bib cock with nozzleswith flange, chromium plated of make that shall match with existing fitting i.e., 8305 of make : Prayag complete all as specified and as directed. 128 S & F inrepairCabinet Mirror PTMT 400 x 500 mm with sided shelves fancy type of superior quality of make that shall match with existing fitting i.e., 554 of makePrayag complete all as specified and as directed. 129 S & F in repair 32 mmbrass Full Thread S.S. Waste Coupling For Wash Basin fixed in repairs of make that shall match with existing fitting i.e., BEA-16B Make : Prayag complete all as specified and as directed 130 Supply and fix in repair CP sink cock regular spout with flange(W/M)of make that shall match with existing fitting i.e.,8716 of Make : Prayag all complete all as specified and as directed. 131 Supply and fix in repair CP Square trap size 101mm x 101mm of make that shall match with existing fitting i.e., FT-73 of Make : Prayag complete all as specified and as directed. 132 S& F in repairs stainless steel sink of size 915x460mm with draining board and bowl size 410x330x160mm,made out of 1mm thick stainless steel sheet of good quality fitted over a pair of CI brackets complete all as specified and as directed. 133 S & F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed. 134 S & F Vitreous china wash down water closet (pedestalpattern ) white (excluding fixing bolts flushing cistern and flush pipe )and fixed in repairs. 135 S & F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed withCI brackets fixed in repairs complete all as specified and as directed. 136 S & F in repairVitreous china Wash Hand Basin,white, flat back of size 550x400mm excludingtaps, waste, chainand plug and porcelain stopper out including brackets complete all as specified and as directed. 137 S & F PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc. and connected to water closet as per manufactures instruction complete all as specified and as directed including removal of existing cistern etc. 138 M & L mortice lock vertical type mild steel size 100 mm4 leaverswith stain less steelhandleset suitable for right or left, inside or out side opening doors, fixed in repairs complete all as specified and as directed. 139 M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipescomplete all as specified and as directed. 140 M & L In repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed. 141 Supply and Fix in repair PVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and as directed. 142 S & F in repair PVC SWR branch piece single "Y"equal or unequal110mm bore with access door complete all as specified and as directed. 143 S & F vitreous china wash down watercloset, white, squatting panOrissa patternof size 580x440mmwith integral footrest including makingnecessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and as directed. 144 S & F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed. 145 S & F in repairs brass chromium plated shower rose of size75mm withswivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe complete all as specified and as directed. 146 S & F looking mirror 600mm x 450mm bevelled edgeon selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specified and as directed and fixed in repair 147 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 148 Supply andfixRolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete gde Fe410-0 quality A complete all as specified and as directed. 149 S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed. 150 M& L forMS work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, including fencing post etc., andsimilar conforming to gradeFe-410-0 or 310-0 complete all as specified and as directed.. 151 Disconnecting existing tanks, Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 250 & n exc 500 litres complete all as specified and as directed. 152 Disconnecting existing tanks, Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes exc 500 & n.exc 1000 Ltrs complete all as specified and as directed. 153 M & L in repair PVC over head water tank cover suitable for 250 to 2000 lt capacity tank including hinge devise and locking arrangement complete complete all as specified and as directed of make Syntex/Rino that matches with existing fitting. 154 Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc and removal of debris to outside of MD land complete all as specified and as directed 155 M&L for Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with grey cement and with pigment and laid over and including for screed bed or bedding layer of mortar 20 mm thick for layingfloor finishes built in cement plaster 1:6 complete all as specified and specified. 156 Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. 157 Demolition of cement concrete (unreinforced )in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. 158 Materials and labour for 75 mm thick plain Cement Concrete (1:3:6), type C-2 (40mm graded aggregate) as in sub bases of floors, complete all as specified and directed. 159 Material and Labour for 100 mm thick plain cement concrete (1:4:8) type B2 using 40mm graded stone aggregate as in sub-bases of floor finished even and smooth without using extra cement, completeall as specified and directed. 160 Material and Labour for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors, ramps, hardstanding etc and finishing the surface even and smooth with using extra cementcomplete all as specified and directed.
|
