Tender For Ac Works Of Sector - 75 Noida Branch in India

Work Detail

Tender For Ac Works Of Sector - 75 Noida Branch Measurement of height shall be taken from finished floor level. In case of varying heights on either side of partition, average height shall be considered. Measurement shall be taken of the visible front surface (elevation - 2D surface) only, nothing extra for designing and provision of niches and vertical sections. H.V.A.C WORK A SPLIT/ CASSETTE TYPE AIR CONDITIONERS 1 Supplying, erection, testing and commissioning following wall mounted Split/ Root mounted cassette units of (Toshiba/ O-General/ LG/ Carrier) with cordless remote complete with all necessary fittings duly insulated with 9 mm thick nitrile rubber pipe insulation with (All coils – copper only), fan and fan motor, machine control panel improved Refrigerant Joints, .Air conditioners shall be fitted with hermetically sealed type suction cooled reciprocating or discharge cooled rotary compressor or scroll compressor. Compressor unit operating on R32/ R-410. All complete as per drawing, approval and instructions of the Architect/ Employer. Item to include powder coated outdoor stands as per the manufacturer specifications.(Rates to be inclusive of Copper refrigerant pipe with insulation up to 3 Mtr length only for Each split AC Unit) Note: All Outdoor Should be design at least 45 degree as per ambient temperature. a 1.0 TR split AC 5 star rating inverter type including all necessary fittings and mountings as specified by the manufacturer Nos. 3.00 b 1.5 TR split AC 5 star rating inverter type including all necessary fittings and mountings as specified by the manufacturer Nos. 1.00 c 2.0 TR Cassette AC Ceiling suspended Cassettewith 4 way / round air flow including all necessary fittings and mountings as specified by the manufacturer. Nos. 0.00 d 3.0 TR Cassette AC Ceiling suspended Cassettewith 4 way / round air flow including all necessary fittings and mountings as specified by the manufacturer. Nos. 2.00 e 4.0 TR Cassette AC Ceiling suspended Cassettewith 4 way / round air flow including all necessary fittings and mountings as specified by the manufacturer. Nos. 0.00 2 EXTRA REFRIGERANT PIPING Supplying and laying of Extra copper refrigerant piping with nitrile rubber pipe insulation, both of size as specified by the manufacturer suitable for 1.0/1.5/ 2.0 TR Split type AC and 2.0 TR/ 3.0 TR/4.0 TR Cassette AC - From Indoor to outdoor Units (make as approved by Architect/ Bank) a For 1.5 TR/ 1.0 TR Split AC as specified by the manufacturer Mtr. 60.00 b For 2.0TR/3.0 TR/4.0 TRCassette as specified by the manufacturer Mtr. 30.00 3 DRAIN PIPING Providing and fixing drain piping up to drain as directed by the engineer incharge with all accessories e.g. elbows, unions, sockets, reducers, reducing tees, nipples etc. Complete job including cutting chiseling in walls, floor and making good of all chases/ cuts etc. and discharging the drain into a floor trap/ gully as per site conditions with insulation, both as specified by the manufacturer (make as approved by Architect/ Bank). a 25 mm dia PVC drain pipe for Split AC Mtr. 60.00 b 32 mm dia PVC drain pipe for Cassette AC Mtr. 30.00 4 Providing and fixing of lockable caging for outdoor unit grouted on wall or on roof with open able shutter made of 10 X 10 mm MS square bars placed vertically @ 6” c/c welded with 40 X 3 mm MS flat all- round. Item includes all necessary hardware, priming coat, synthetic enamel paint, hanger, clamps other accessories etc. All complete as per approval and instructions of the Architect/ employer. a For 1.0/ 1.5/ 2.0 TR Hi Wall split units Nos. 0.00 b For 2.0/ 3.0/4.0 TR ceiling mounted cassette unit Nos. 0.00 5 Supplying and laying of Extra Electrical interconnecting control cable from indoor to outdoor of size as specified by the manufacturer suitable for 1.0/1.5 TR Split type AC (make as approved by Architect/ Bank). Mtr. 60.00 6 Supplying and laying of Extra Electrical interconnecting control cables from indoor to outdoor of size as specified by the manufacturer suitable for 2.0T/ 3.0T /4.0 TR Cassette type AC (make as approved by Architect/ Bank). Mtr. 30.00 7 Supplying, installation and commissioning of voltage stablizer of range 170-280 V for Acs (V-guard/ Livguard/ Kirnotics make as approved by Architect/ Bank). For 1.0 / 1.5 Tr. Wall mount (4 Kva) Nos. 0.00 8 Supplying, installation and commissioning of automatic 24 HRS. Programmable TIMER of required capacity to run A.C. alternately (MDS/ L&T/ make as approved by Architect/ Bank). Nos. 1.00 9 Supplying, installation and commissioning of Drain Pump of required capacity to Drain out the water from indoor.

Contact Information