Tender For Construction Of Approaches Of Suspension Bridge At Padshahi Bagh Bijbehara [Adv. Cost ? 57.77 Lac ... in India

Work Detail

Tender For Construction Of Approaches Of Suspension Bridge At Padshahi Bagh Bijbehara [Adv. Cost ? 57.77 Lacs (?48.96 Lacs Exclusive Of Gst + Gst@18% ?8.81 Lacs)]- 1 Earth work in excavation by Mechanical means in foundation trenches,drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10SqMts on plan) including dressing of sides and ramming of bottoms,lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 50 Mtrs 2 Providing and laying of hand Packed stone soling complete job incl all carriages 3 Providing and laying in position cement concrete 1:4:8 grade (1cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)of specified grade excluding the cost of centring and shuttering including all carrriages complete 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) incl all carriages 5 Steel reinforcement in RCC work including straightning , cutting ,bending , placing in position and binding all complete above plinth level TMT bars of grade FE-500D or more 6 Providing and laying in position cement concrete of specified grade includign curign but Excluding the cost of centring shuttering All work upto plinth level with 1:2:4 grade (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including carriage 7 Centering shuttering incl. starightening and removal of form work for walls 8 Edges 9 Sofits 10 Edges 11 foundation Footings 12 columns , beams 13 Providing and fixing GI chain link fabric fencing of required width in mesh size 25x25mm made of GI Wire of dia 3mm incl strengthining with 2mm dia wire or nuts ,, bolts and washers as required complete as per directions of EIC 14 Structural steel work in built up sections, trusses and framed work , including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete welded 15 Finishing with Epoxy paint two or more coats at all locations prepared and applited as per manufacturer"s specifactions incl appropiate prmiming coat preparation of surface etc complete on steel work 16 Providing and laying gang saw cut of specified thickness, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch upsetc. complete as per direction of Engineer-inCharge 17 P/F stainless steel (Grade 304) railing made of hollow tubes , channels , plates etc ,incl welding, grinding , buffing , polishing and making curvature and fitting the same with necessary stainless steeel nuts and bolts complete , incl fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc of required size on the top of the floor or the side of wasit slab with suitable arrangements as per approval of EIC ( for payment purpose only) weight of stainless steel members shall be considerd excl fixing assocerries such as nuts bolts fastners etc 18 flooring with cooble stones of approx size of 100x 100x 75 laid on 25 mm thick cement mortor 1:3 ( 1 cement 3 sand ) and jointed with gray cement slurry mixed with pigment to match the shade of stones laid in approved patern complete in all respects as per directions of EIC Please Enable Macros to View BoQ information

Contact Information