|
Low Cabinet With Shelf - Body: Formed By Top, Sides, Bottom And Base Base, Made Of 18 Mm Thick Chipboard, Covered In Low Pressure “Maple” Textured Melamine Laminate On Both Sides, With Pvc Edges In The Same Color As The Laminate. Low Swing Doors In 18 Mm Thick Chipboard, With Pvc Edges In The Same Color As The Laminate, Equipped With Hinges Made From Antimony Alloy, Allowing Rotation Of Up To 270º. Stainless Steel Handle Handles, And Single Control Retractable Front Lock With Double Sided Retractable Key. Internally With An Adjustable Shelf Forming Two Spaces, In 18 Mm Thick Chipboard, Covered In Textured Melamine Laminate In “Maple” Color, Low Pressure On Both Sides, Supported By Four 24 Mm Rt Pin Shelf Supports, Nickel-Plated Finish. Base: Skirting Board Made Of 60X30mm Rectangular Section Steel Sheet, Phosphated Through 9 Immersion Baths, Painted In Graphite-Colored Epoxy Using The Electrostatic System, Cured In An Oven With Level Regulating Shoes, M8 Screw, Metric Thread And In Black Injected Nylon (Or Similar). Measurements: 800X470x740mm (Wxdx). Note: You Must Have The Option Of Installing A Top With A Cutout To Pass A Matrix Form Measuring 450X20mm With A Radius Of Curvature At The Ends Of 10Mm. Model Below., Tall Cabinet With Doors And Shelves Body: Formed By A Top, Covered In “Maple” Low Pressure Melamine Laminate On Both Sides, With Edges In Polyvinyl Chloride (Pvc) In The Same Color As The Laminate. Tall Swinging Doors In 15 Mm Thick Chipboard, Covered In Melamine Laminate Body: Formed By A Top, Covered In Melamine Laminate. Model Below., Tall Bin Cabinet With 12 Doors Body: Tall Bin Type Cabinet Measuring 900X500x1630mm With 12 Slots And Doors. Top Made Of 15 Mm Thick Chipboard, Covered On Both Sides In Low Pressure Textured Melamine Laminate In The Color “Maple”, With Straight Edges, In Polyvinyl Chloride (Pvc) In The Same Color As The Laminate. Sides, Coated On Both Sides In Low Pressure Textured Melamine Laminate In “Maple” Color With Straight Edges, In Polyvinyl Chloride (Pvc) In The Same Color As The Laminate. Swing Doors, For 12 Bays, Made Of 15 Mm Thick Chipboard, Covered In Low Pressure Textured Melamine Laminate On Both Sides In The Color “Maple”, In Polyvinyl Chloride (Pvc) In The Same Color As The Laminate, Allowing Rotation Of Up To 270°. Stainless Steel Handle Type Handles, And Independent Single Control Retractable Front Locks With Double Sided Retractable Key. Base: Skirting Board Made Of 60X30mm Rectangular Section Steel Sheet, Painted In Graphite-Colored Epoxy Paint Using The Electrostatic System, Cured In An Oven With Level Regulating Shoes, M8 Screw, Metric Thread And In Black Injected Nylon (Or Similar). Measurements: 900X500x1630mm (Wxdx). Model Below., Reception Counter Linear Module Body: A 25 Mm Thick Chipboard Top, Covered On Both Sides In Textured Low Pressure Melamine In The Color “Maple” With Straight Edges In Polyvinyl Chloride In The Same Color As The Laminate. With Two Cable Glands With A Diameter Of Ø 60 Mm In Injected Polystyrene In The Same Color As The Laminate. Support Of The Top By 01 Pair Of Stabilizing Feet With Internal And External Wiring Passage With Regulatory Shoes, Metric Thread And In Black Injected Nylon (Or Similar) In Steel Sheet Painted In Epoxy Paint In Graphite Color.
|
