|
File Cabinet 4 Drawers 500X510x1350mm. File Cabinet 4 Drawers 500X510x1350mm. Top: In 25 Mm Thick Mdp, Covered In Melamine Laminate On Both Sides. Edges Finished In Semi-Rigid Polystyrene Tape, 3 Mm Thick And With A Minimum Radius Of 2.5 Mm, Fixed To The Drawer Structure Using Steel Screws And Metal Plugs. Structure: Bottom, Sides And Lower Base In 18 Mm Thick Mdp, Covered In Melamine Laminate On Both Sides. Edge Finishing In 01 Mm Thick Pvc Tape, Drawers: 04 Drawer For Hanging Folders Made Of #22 Thick Steel Sheet, Folded And Welded Using Electro-Fusion, With Smooth Sliding On Telescopic Steel Slides. Front Of The Drawers In 18 Mm Thick Mdp, Coated In Melamine Laminate On Both Sides. Edges Finished In Semi-Rigid Polystyrene Tape, 3 Mm Thick And With A Minimum Radius Of 2, Lock With Simultaneous Closing, With 2 Folding Keys. Handle Type Handle Produced In Zamak Metallic Components: All Metallic Parts Used Must Receive Chemical Pre-Treatment Epoxy-Powder Painting, Skirting Board With Textured Finish. Present Documentation Of Minimum Evidence Of Quality And Environmental Commitment: Fsc Or Ceflor Certification In Order To Demonstrate The Origin Of The Wood That Will Be Used. Certificate Of Regularity In Ibamas Federal Technical Registry For Potentially Polluting Activities Within Validity On Behalf Of The Furniture Manufacturer. - Ergonomic Report In Compliance With Applicable Requirements Of Subitem Nr-17, Ordinance 4,219 Of December 2022 Of The Ministry Of Labor, Issued By An Occupational Safety Engineer, Occupational Physician Or Ergonomist Certified By Abergo, With Images And/Or Descriptions Of The Product And/Or Photographs And/Or Diagrams And/Or Its Functionalities Present In The Assessment Report/Perfect Identification Of Products Subject To Analysis. Generic Reports, Without Detailed Identification Of The Objet Product, Closed Low Cabinet, Will Not Be Accepted. Low Closed Cabinet. Dimensions: 800X510x740mm (Lxdxh). Top In Mdp 25Mm Thick, Covered In High-Resistance Melamine Laminate, At Least 0.3Mm Thick. Edges Protected By Flexible Polystyrene Tape 3Mm Thick, With Rounded Edges Around Its Perimeter With A Minimum Radius Of 2.5Mm. Doors: Two Opening Doors In 18Mm Thick Mdp, Covered In Melamine Laminate, 0.3Mm Thick On Both Sides. It Has Edges Protected By Flexible Polystyrene Tape With A Thickness Of 1 Mm. Each Door Has Two Hinges That Allow Opening At Least 270º, Self-Tapping, Flat-Headed. It Features A Pressure System Activated When Closed, Zinc-Plated And Lubricated Steel, And A Plastic Locking Piece, Keeping The Door Pressed Inwards Without Gaps After Closing. It Has A Steel Shaft, Preventing Friction And Eliminating The Need For Lubrication. It Has A Handle On Each Door, Made Of Extruded Aluminum And Arched With A Convex Shape. Lock: In Chromed Steel, Cylinder In Chromed Steel. Equipped With Brass Or Steel Springs And Pins, Lubricated With High-Performance Marine Grease Throughout The Internal Mechanism, Reducing Friction And Preventing Possible Jamming. Each Lock Has An Individual Secret, Not Allowing The Key From Another Lock To Open It. It Has A Steel Tongue With A Mechanism That Allows The Rotation Of Two Aluminum Rods On The Vertical Axis, Being
|