|
Tender For Repair/ Replacement Of Street/ Security Lights, Timer Switches And Connected Misc Works At Sma Rameswaram Under Ge Fort Kochi; 1 Material and labour for repair to unserviceable street/security/solar light fittings of LED, of any wattage and size by taking down from poles/buildings after disconnecting the electric connection, replace the unserviceable drive, PVC connector etc. cleaning, re-fixing the light fittings at its original position after rectifying the defects and connecting to street light feeder including testing complete all as specified and as directed. Note for item No1: 1) Replacement of parts will be measured and paid separately as supply only 2) The cost of labour and tools required for replacement of parts shall deemed to be included in the unit rate quoted by the contractor. 2 Supply only for renewal of LED driver suitable for LED street light/flood lights 25 to 60 watts230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed. 3 Supply only for renewal of LED driver suitable for LED street light/flood lights 70-90 watts230V compatible with LED Luminairein all aspects complete all as specified and as directed . 4 Supply only for renewal of LED driver suitable for LED street light/flood lights 100-150 watts230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed. 5 Supplyand fixing for renewal of LED post top made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA opal and Clear douser and IP65 protection at site in all aspects complete all as specified and as directed.Make :Bajaj, ARIAN cat part No. BGCTN 45W LED WH or equivalent as approved by GE. 6 Supply only for renewal of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, all as specified and as directed. 7 Supply only for renewal of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with aerodynamically designed for all weather conditions with excellent thermal management complete, all as specified and as directed.Make:-Crompton/ Philips/Havells. 8 Supply only for renewal of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. 9 Supply only for renewal of LED flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed. Make- Phillips/Crompton cart part Np. CFS-504-50-57-60D sl-gl-NSG or equivalent. 10 Supply and fixing in renewal ofenergy saving LED Garden light of 9 W LEDs made up of aluminium casting with acrylic diffuser for soft illumination effect and the bollard trunk is of black powder coatedcomplete all as specified and as directed 11 Supply and fixing in renewal ofSMC junction box size of 300x200x105 mmfixed on pole including provision of MCB SP 20 Amps fixed on rail inside box with proper hinges locking arrangements with provision of clamping accessories complete including taking down old unserviceable item all as specified and as directed. 12 Supply and fixing of 2 core, 6 Sqmm PVC flat weather proof aluminum cable including taking down old unserviceablecable of any size complete all as specified and as directed. 13 Supply and fixing of 2 core, 10 Sqmm PVC flat weather proof aluminum cable including taking down old unserviceablecable of any size complete all as specified and as directed. 14 Material and labour for applying a coat of cement base paint to PCC Pole 9 metre long and writing pole number with synthetic enamel paint (White with black base) includingapplying a coat of aluminium paint to FIClamps/ Brackets and applying oil paint black and yellow colour alternatively up to 1.2 mtr from ground complete all as specified and as directed. 15 Material and labour for preparation of old steel surfaces over 10cm width or girth not otherwise described and applying a coat of synthetic enamel paint to steel tubular pole complete all as specified and as directed. 16 Supply and fixing in repairs PVC insulated 3 core copper conductor cable of size 1.5 Sqmm sheathed 1100 volts including PVC conduit pipe conforming to IS 694 from junction box to street light fitting, all as specified and as directed. 17 Supply and fixing in repairs GI bracket for RCC Pole, made out of GI pipe 25/32 mm diamedium grade, 1.5 mtrlong bent to shape and fixing on poles with MS clamps of suitable sizes etc. complete, all as specified and as directed. 18 Excavation in trenches not exc 1.5m wide and not exc 1.5m deepfor laying /removing of cable/ erection of poles in Soft/ loose soil all as specified and as directed. 19 Material and labour for riddled sand for cable cushioning in trenches all as specified and as directed.Note: For the purpose of payment punned thickness of sand cushioning will be measured and paid. 20 Supply and laysub class "B"burnt bricks of size 23x11.5x7.5 cm,laid length of brick perpendicular to length of cable complete all as specified and as directed. 21 Material and labour for returning and filling in of soil including spreading levelling, watering and ramming in layers not exceeding 25 cmcomplete all as specified and as directed. 22 Material and labour for removing excavated soil to a distance not exceeding 50 metreandnot exceeding 1.5 metre above the starting point, and depositing where directed complete all as specified. 23 Material and labour for straight through joint, outdoor type 1100 volts grade, heat shrinkable type suitable for 4/3.5 core ,10 sqmm to 25 sqmm LT, XLPE cable and testing after jointing including taking down the old straight through joint complete all as specified and as directed. 24 Material and labour for PCC (1:3:6) ,type C-1,(using 20 mm graded stone aggregate ) as in coping and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and as directed. 25 Material and labour for demolition of cement concrete unreinforced in ground floors and pavingsnot exc 15 cm thickness (below or above ground level) for laying UG cable or any other purpose complete all as specified and as directed 26 Supply and fixing in repairs 3 phase VAF/PF meter square type having accuracy class 1, range up to 50-400 Amps with selectable CT secondary site 1A/5A all as directed and as specified. 27 Supply and fix in repairs indicating lamps LED type set (R,Y,B) all as specified and as directed. 28 Supply and fixing XLPE insulated PVC sheathed armoured with multistranded aluminium conductor cable having crosssectional area as follows1100-volt grade, heavy grade conforming to IS :7098 (Part 1) laid in trenches/Ducts or passing through pipes or fixing on poles etc. complete all as specified and as directed.Note :Necessary earth works sand cushioning cable protection cover GI pipe etc. will be measured and paid separately under relevant items. 29 10 sqmm 2 core cable 30 16 sqmm 4 corecable 31 25 sqmm 4 corecable 32 Supply and fixing 40 mm dia GI pipe light grade for cable protection including taking up of old unserviceable pipe all as specified and as directed. 33 Material and labour for road cutting not exceeding 1.0 M width and 1.0 M depth including excavation, returning, filling in, spreading, levelling, well ramming in layers, soling with broken boulders / stones, suitable size coarse aggregate and making good the surface at par with the existing surface complete all as specified and as directed.Notes: (i)Actual executed depth, width and length of road shall be measured. 34 Material and labour for taking down existing unserviceable UG cable all as specified and as directed. 35 Material and labour for taking down and re-fixing carefully and keeping in safe custody of street light fitting of wattage and fixing back on any other pole including providing necessary fitting, complete all as specified and as directed. 36 Supply and fixing in repairs hot dip galvanized single arm bracket on steel tumbler poles complete all as specified and as directed. Make :- Crompton graves/ Philips or equivalent as approved by GE. 37 Supply and fixing in repairs hot dip galvanized double arm bracket on steel tumbler poles complete all as specified and as directed. Make :- Crompton graves/ Philips or equivalent as approved by GE. 38 Supply and fixing factory made and Outdoor type powder coated CRCA sheet 1.6 mm thicksuitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system with provision of programmable timer switch for street lights (digitaltimer setting with monsoon/summer/winter etc) with three phase contactor 20 amps , 10 amps MCB TPN including taking down the old complete all as specified and directed. 39 Supply and fixing inrepairs street light timer box of Max 6 KW ,32 Amps TP contactor MCB 40 Amps TPN digital 24 Hrs complete all as specified and as directed. Make : Havells/Bajaj or equivalent 40 Supply and fix in repairs 3 Pole Contactor up to 40 Amps capacity, suitable for existing street light pole control panel all as specified and directed.
|
