|
Tender For Varnishing Painting And Recanning To Steel Wooden Furniture At 8Fbsu Af Stn Awantipur; 1 STEEL FURNITURE:- Side Rack 2,3 and 4spaces Steel (FD-1023):- Preparing surface including rusted portion of Rack Side steel 3 spaceby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 2 Rack Six/seven tires steel(FD-1038):- Preparing surface including rusted portion of Rack Six/seven tires steelby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 3 Almirah large steel FD-67, 351 & 1033 :Preparing surface including rusted portion of Almirah Med/small steelby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 4 Almirah medium/small steel FD-32, 350,571 & 1032:Preparing surface including rusted portion of Almirah Med/small steelby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 5 Book case steel & Book shelf open large (FD-1038):- (a) M&L for repair and replacement of the following parts of Book case steel & Book shelf open largeall as specified and directed by Engineer-in-Charge :-(a)Replacement of old/brokenshelves of Book case steel & Book shelf open large with new shelves welded to angle iron leg made to shape & size as per drg out of MS black sheet 01mm thickcomplete all as specified and directed by Engineer-in-Charge. 6 Bed Hard Map & Charpoy with Hard Top MAP:- (a) Preparing surface including rusted portion of Bed Hard Map & Charpoy with Hard Top MAP by scrubbing with sand paper applying one coat synthetic enamel black paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 7 Rack shoe steel :- Preparing surface including rusted portion of Rack shoe steelsteelby scrubbing with sand paper applying one coat synthetic enamel black paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 8 CHAIR CB STEEL WITH ARMS ANDCHAIR CB STEEL WITHOUT ARMS FD-75: Preparation of surface of the following items by filling putty and sand paper and applying O.G. paint by spray painting externally to the entire satisfaction of Engr-in-Charge:- 9 LOCKER BED SIDE STEEL FD-1029 :Preparing surface including rusted portion of locker bed sideby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete rack inside and outside all as specified and directed by Engineer-in-Charge. 10 TABLE OFFICECLERK STEEL FD-84,1004:Preparing surface including rusted portion of Table office clerk steel by scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete table inside and outside all as specified and directed by Engineer-in-Charge. 11 TABLE OFFICE OFFRS STEEL FD-84,1003 :Preparing surface including rusted portion of Table office clerk steel by scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete table inside and outside all as specified and directed by Engineer-in-Charge. 12 TABLE 900 X 900 MM FD-1009: Preparing surface including rusted portion of TABLE 900 X 900 MMby scrubbing with sand paper applying one coat synthetic enamel OG paint with spray gun to complete table inside and outside all as specified and directed by Engineer-in-Charge. 13 Charpoy Double Bunk Steel :- Preparing surface including rusted portion of Charpoy Double Bunk Steel by scrubbing with sand paper applying one coat synthetic enamel silverpaint with spray gun to complete charpoy double bunk all as specified and directed by Engineer-in-Charge. 14 French polishing of under mentioned items of furniture after preparation of wooden surfaces, smoothened by removing all accumulated dust, making the replaced item match with the existing colour, complete toentire satisfaction ofEngr-in-Charge.(a) Table dinning for six/eight people.FD-30,273,289,376 15 (b) Table 3’x2’ without drawer.FD-41,55,293,237 16 (c) Table 3’x2’ with drawer.D-42,233,284 17 (d) Table writing.FD-33,249,275 18 (e) Table Clerk Wooden FD-31 19 (f) Table centre.FD-35,235,267,134,152 20 (g) Table peg, FD-384 21 (h) Teapoy wooden, FD-382 22 (j) Table dinning (1200 X 900 mm) FD/MAP-II/03 23 TABLE DINNING ORS: FD-165Preparation of steel surfaces of conduit frame of the table by filling putty, smoothened bysand paper and spray painting in OG shade, complete toentire satisfaction ofEngr-in-Charge. 24 CHAIR DINING: FD-16, FD-279(a) M&L for recanning of seat as per Godrej pattern with plastic cane white in colour of size 2 mm to 2.5mm complete. 25 (b) Applying one coat of french polish (gloss finish) on repaired /old polished chairs after making the surface smooth, all as directed by Engineer-in-Charge. 26 CHAIR DINING MAP (FD/E6/MAP/10) : Applying one coat of french polish (gloss finish) on repaired /old polished chairs after making the surface smooth, all as directed by Engineer-in-Charge 27 CHAIR WRITING: FD-20, FD-280(a) Material and Labour for recanning of seat as per Godrej Pattern with plastic cane white in colour of size 2mm to2.5mm complete . 28 (b)Applying one coat of french polish (gloss finish) on the repaired /old polished chairs after making the surface smooth, all as directed by Engineer-in-Charge. 29 CHAIR EASY:(FD-299 & FD-17) M&L for recanning of seatbottom / back rest as per Godrej Pattern with plastic cane white in color of size 2 to2.5mm complete. 30 (b) Applying one coat of french polish (gloss finish) on the repaired /old polished chairs after making the surface smooth, all as directed by Engineer-in-Charge. 31 CHAIR VERANDAHFD-256 :-(a)Removing of old unserviceable canefrom chair verandah and reweaving with new approved quality(as approved by the GE) white plastic cane 4-5 mmwide semiround. Make: Premier/shah,and weaving the same in mat pattern, rest all as shown on drgs and directed by Engineer-in-Charge. 32 (b) Painting of chair verandah with two coats of synthetic enameled paint white colour after making the surface smooth before canning all as specified and directed by Engr-in-Charge. 33 (c)Replacement of old/broken rubber shoes superior quality suitable for 20 mm dia pipe 34 Sofa Set 5/4/2 Seater(FD-281):-Preparing of old treated wooden surface of Sofa Set 5/4/2 Seater and applying one coat of French polish complete all as specified and directed by Engineer-in-Charge. 35 Bed Hard with ply wood top(FD-246):- Preparing of old wooden surface of Bed Hard and applying one coat of French polishfor all wooden parts as specified and directed by Engineer-in-Charge. 36 Mirror Dressing Gents and dressing mirror ledies (FD/E6/MAP/16) :- Preparing of old wooden surface of Mirror Dressing Gents and dressing mirror lediesand applying one coat of French polishfor all wooden parts as specified and directed by Engineer-in-Charge.
|
