|
Tender For Comprehensive Maintenance In Jcos And Md Accommodation In Aor Of Age B/R-I Under Ge (South) Udhampur.; 1 Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately) and applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymericAPP (Atactic Polypropylene) Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm and applying two coats of aluminium paint on roof complete all as specified and as directed by Engr-in-Charge.Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise. 2 Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed. 3 Demolition of Cement Concreteof any description and in any position not otherwise specifically provided for, complete all as specified and as directed. 4 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 5 Glazed coloured ceramic tiles in dado/vertical surface (600x300mmx 9-10mm) thick set and jointed in neat cement slurry and pointed in colouredcement to match the surface, over and including 10mm thick plaster in cement mortar 1:3, complete all as specified and as directed. 6 Non skid, coloured ceramic size 400x400 jointfree/rectified tiles 7mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc,set and jointed in neat cement slurry and pointed incoloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed. 7 Non skid, coloured ceramic size 600x600 jointfree/rectified tiles 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1sqm in floors etc,set and jointed in neat cement slurry and pointed incoloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed. 8 Non skid, coloured ceramic size 1200x600 jointfree/rectified tiles 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1sqm in floors etc,set and jointed in neat cement slurry and pointed incoloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed. 9 All as per serial item No. 10.00 here in before but on vertical surfaces as in skirting/dado over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed. 10 25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed. 11 Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in floor including rubbing and polishing over & including screed bed or bedding layer 20mm thick in cement mortar (1:4) complete, all as specified and as directed. 12 Machine cut kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over & including 10 mm thick rendering in CM (1:3) complete all as specified and as directed. 13 Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed. 14 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and mirror finish polishing over and including 20 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed. 15 15 mm thick rendering on fair faces of brick /concrete on wall including facia chhajja etc.surfacesin cement mortar 1:4 and finishedeven and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturers instructions for buildings upto height og 7.50m including scafoldings complete all as specified and as directed.Note : Water proofing compund to be measured and paid for separately as supply only. 16 10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed. 17 5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed. 18 Supply only Integral water proofing compound,complete all as specified and as directed. 19 Taking down chowkats or frameswith shutters(without taking offshutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. 20 Description all as per item No. 19 above but area exceeding 1.50 square metre and not exceeding 4 square metre each. 21 Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete,of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer,including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed. 22 Description all as per item No 21 above but frame size 105 x 60 mm. 23 35 mm thick, factory made, 2nd class hard wood,plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. 24 Description all as per item No 23 above but glazed and skeleton shutter with sash bar for glass/wire gauge. 25 Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed.Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. 26 Description all as per item No 25 here in before but without glazing bar complete all as specified and as directed.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3ii) MS fillets, glazing, wire gauge shall be measured and paid for separately 27 Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.ii) MS fillets, glazing, wire gauge shall be measured and paid for separately 28 Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified. 29 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. 30 4 mm thick figured glass (frosted) ,pin head type and glazing with oil puttynot exc 0.50 Sqm in each panefixing to window/ventilator complete all as specified and as directed. 31 Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete, all as specified and directed. 32 Rolled mild steel work of angle ironas in frames of doors & Cup Board & Iron ladders etcconforming to grade Fe 410-O or Fe-310-O complete all as specified 33 Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt, complete, all as specified and directed. 34 19mm thick Prelaminated particle board, termite proof, chemically well pressed, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in kitchen cabinet, cub boards, etc including 6mm thick teak wood beading all around complete all as specified and as directed by Engr-in-Charge. 35 Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all asspecified and directed by Engr-in-Charge 36 Walling of random rubble stone masonry uncoursed, with best quality locally available stones, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed. 37 Description all as per description of serial item No 36 here in before but except stone. 38 Pre-cast plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in bond stones and in similar works set in cement mortar 1:6, including necessary form works, complete all as specified and directed by Engr-in-Charge. 39 Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses of granite or trap stone etc. and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm complete all as specified and as directed by Engr-in-Charge. 40 Flush pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses, in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. 41 Brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6bricks all complete all as specified and as directed. 42 Brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6 but except bricks all complete all as specified and as directed. 43 Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortor 1:4 complete all as specified and as direceted . 44 Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified. 45 Water proofing treatment to the sunken portion applying two coat of two component (1 part Polymer andsecondpart cementations powder) cementations, polymer modified elastomeric, water proofing coating composed of cement, properly selected and graded aggregates, additive and acrylic emulsion polymer as a binder apply first coat of (mix and application as per manufacturers instructions) all over floor surface/prepared surface and apply to vertical surface up to 15 cmfrom tilling level, allow to dry 4 to 6 hours.Prepare for apply 2nd coat perpendicular to first coat and allow to dry 4 to 6 hours. All joints of Trap/WC/Soil pipe shall be Properly sealed with ceiling compound/polymer modified mortar using Dr Fixit Pidicrete URPor equivalent, Slope of slab shall be towards and including GI pipe 50 mm dia of suitable length Spout pipe. Providing 15 mm protective screed with cement mortar in 1.3 with WPC (Make:Dr Fixit LW+ or equivalent)within 2 to 3 days of second coat complete all as specified as per manufacture instructions and as directed by Engineer-in–charge. Make: Dr Fixit Pidifin 2K or other equivalent make complete all as specified and as directed by Engr-in-Charge. 46 Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthrough out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weightcomplete all as specified. 47 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified. (ISI Mark) 48 Continuous MS CP piano type hinges 30mm flap (when opened ), bright finish or electrogalvanisedcomplete all as specified and directed. 49 150 mm aluminium handles, cast type anodised complete all as specified and directed.(ISI Mark) 50 100 mm aluminium handles, cast type anodised complete all as specified and directed.(ISI Mark) 51 150mm long, aluminium anodised, barrel tower bolts (ISI Marked) of extruded section and fixed, complete all as specified and directed. 52 2nd class hard wood small fittings such as rackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed. 53 Supply only glass dividing strips, 3mm thick and 38mm wide, complete all as specified. 54 Butt hinges, medium weight, cold rolled, mild steel 75 mmlong (ISI marked), complete all as specified. 55 Butt hinges, medium weight, cold rolled, mild steel 50 mmlong (ISI marked), complete all as specified. 56 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate, fixed to frame, complete all as specified and as directed. 57 Taking down shutters of any descriptionsarea exceeding 1 square metre and not exceeding 2 square metre each complete, all as specified and directed by Engineer-in charge. 58 Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. 59 Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. 60 Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing as per specification & drawing, complete all as specified and as directed by Engr-in-Charge 61 Vitreous China wash basin, pedestal type,coloured, flat back,size 550x400mm excluding tap, chain, plug but, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin with pedestal, fix in repair, complete all as specified. 62 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs, complete all as specified and directed. 63 Preparation of wooden surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. 64 Preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and as directed 65 Preparation new surfaces plastered or unplastered and applyingtwo coats of white wash on ceiling, complete all as specified and as directed . 66 Applying two coats of oil bound distemper over and including a coat of primer and 1 mm thick a layer of wall care putty including preparation ofold plastered/ unplastered surfaces of wall, including complete removal of existing treatment complete all as specified & directed. Note:- (Bfore applying of wall care putty, complete removing of treatment complete all as specified & directed). 67 Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint , complete all as specified and as directed. 68 Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic seat coverwater closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron P or S trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed. 69 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete all as specified and as directed. 70 Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed. 71 Grating round 100 mm size dia fixed in repair to floor trap complete all as specified and as directed. 72 Fancy towel rail 600mm long, brass chromium plated, complete all as specified and as directed. 73 PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. 74 Steel peg set colour coated of six as per sample kept in Ges Office fixed in repairs complete all as specified. 75 Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and as directed. 76 Plate rack made of stainless stee, 600 x 750X0.55mm including fixing as per manufacturers instruction complete all as specified. 77 75 mm thick PCC 1:5:10 type E-2 using 40mm graded brick aggregates asin filling of sunken floors, complete all as specified and as directed by Engr-in-Charge. 78 Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wallupto 100mm complete all as specified. 79 S&F Cast iron soil, waste and vent pipes (Sand cast pipes) in any length with or without ears, with cement joints laid in trenches or in floors of 100mm bore, complete all as specified and as directed. 80 Cast iron soil, waste and vent pipes (Sand cast pipes) in any length with or without ears, with cement joints laid in trenches or in floors of 75mm bore, complete all as specified and as directed. 81 Cast iron soil, waste and vent pipes (Sand cast pipes) in any length with or without ears, with cement joints fixed to wall or in floors of 100mm bore, complete all as specified and as directed. 82 Cast iron soil, waste and vent pipes (Sand cast pipes) in any length with or without ears, with cement joints fixed to wall or in floors of 75mm bore, complete all as specified and as directed. 83 Cast iron soil, waste and vent pipes (Sand cast pipes) in any length with or without ears, with cement joints fixed to wall or in floors of 50mm bore, complete all as specified and as directed. 84 Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed. 85 Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed. 86 Stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or rooffor 100/110mm bore of pipe complete all as specified and as directed . 87 Stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 75mm bore of pipe complete all as specified and as directed. 88 Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed. 89 Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75 bore, fitted with oval access door as in repairs complete all as specified and as directed. 90 110mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to wall with clamps, complete all as specified and as directed . 91 110 mm bore PVC SWR bendsand fixed with joint sealent etc, complete all as specified and as directed. 92 75mm Cast iron cowls as in repairs complete all as specified and as directed. 93 50mm Cast iron cowls as in repairs complete all as specified and as directed. 94 75mmCast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4), complete all as specified and as directed.(ISI Mark) 95 Cast iron work as in lids for oval access doors for 100mm bore pipes and fittings including all necessary threading and nut/bolts required as directed. 96 Cast iron work as in lids for oval access doors for 75mm bore pipes and fittings including all necessary threading and nut/bolts required as directed. 97 Reinforced cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in chajjas and the like all as specified and as directed. 98 Taking up or down steel tubing of 15 mm bore with connections for cleaning for refixing or removing from site, complete all as specified and as directed. 99 Taking up or down steel tubing of 20 mm bore with connections for cleaning for refixing or removing from site, complete all as specified and as directed. 100 15mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls andor laid under floors etccomplete all as specified and as directed. 101 20mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls andor laid under floors etccomplete all as specified and as directed. 102 Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm, fixed in repairs,complete all as specified and as directed. 103 Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm, fixed in repairs,complete all as specified and as directed. 104 Angle valve, fancy type chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, fixed in repairs,complete all as specified and as directed. 105 Bib taps, fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrulefor bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed. 106 Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres including all accessories {i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight210 gram) etc}, and dismantling of old UNSV water tank of same capacity all as specified and directed. 107 Shower roses 15 mmchromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union,complete all as specified and as directed. 108 S&F in repairs WHB mixer, fancy type cast copper alloy with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm , all as specified and directed. 109 Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified &directed. 110 Soap dish, vitreous China white, approximate size 160x 160x90mm, fixed in repairs, complete all as specified. 111 S & F in repairs15 mm dia wall mixerchromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specifie and as directed. 112 Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level), complete all as specified and as directed. 113 Broken stone hardcore of gauge exceeding 63 mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. 114 PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundations filling and mass concrete., complete all as specified and as direceted. 115 Sand cushioning under floors including watering and consolidation complete all as specified and as direceted. 116 Machine pressed / vibro mechenically floatedinterlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 80mm thickness, M-35 Grade, with topping of cement without pigment. Shape shall be approved by GE. 117 Vitrified Dura stonetiles of size 300mmX300mmX10mm thick as infloorsset and jointed in neat cement slurry and pointed incoloured cement to match over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed. 118 100mm thick PCC 1:3:6 Type C2 using 40 mm graded stone aggregates as in sub base of floors., complete all as specified and as directed. 119 Welding in repars to window, door hinges, grills etc. exc 2.50cm of thickness not exc 6 mm, complete all as directed. 120 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. 121 Pre-painted coloured corrugated profiled Galvalume/Zincalume sheet with min 0.50mm TCTwith BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and directed 122 Pre-painted coloured plain steel profiled Galvalume/Zincalume sheet with Min 0.50 mm TCT with BTM of 0.45mm thick conforming to IS-513(AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHPxRW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer ,all fixed with Galvanised self drilling self-tapping fastener (12-14x55 with EPDM seals) complete all as specified and directed. 123 Preparing old plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed. 124 Preparing old plastered or unplastered surfaces of wall and applying one coat of cement base paint, complete all as specified and as directed. 125 Applying two coats of oil bound distemper including preparation ofold plastered/ unplastered surfaces of wall, complete all as specified & directed. 126 Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing andfixing new ones complete all as specified. 127 Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. 128 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed by Engr-in-Charge.Make of false ceiling board & GI Grid : Everest/V board or equivalent as specified in PS 129 Cleaning and removing all scale and dirt, etc, from tanks exc 500 and nexc 1000ltr capacity and from mouths of circulating pipes, etc.complete all as specified and as directed. 130 Cleaning and removing all scale and dirt, etc, from tanks exc 250 and nexc 500ltr capacity and from mouths of circulating pipes, etc.complete all as specified and as directed. 131 Smart care damp proof advanced compound laid in wall/roof or in any location with and including preparation of surface all as per manufacturers instructions,complete all as specified and as directed. Make: Asian/MYK Arment WPU1KE/Fosroc NITOPROOF 600PF. 132 Water closetcloured(Single piece)of size 370x695x795mm S trap distance (mm) S-300, with UF soft close seat cover set fixed in repairs complete all as specified.
|
