|
Tender For Provision Of Otm Accommodation For Or Of Hq Mtn Bde At Laipuli Under Ge Dinjan; 1 Total amount of Sch A Part-IBuilding WorksNote :- This schedule is not pre-priced by MES and the rate indicated as Rs. 0.00 under column 6 signifies this fact only. 2 Soil investigation, Design, Fabrication and Construction of OTM ACCN FOR ORin RCC Framed Structure as per Arch Drg No. CWE/DIN/15/25 sheet No. 1/3 to 3/3 dated 20.01.2025 AND CWE/DIN/15/25 sheet No. 1/1 dated 20.01.2025 and specification given in Sch A Notes and Particular Specifications including complete RCC foundation and plinth, Flooring, Joinery and Finishes complete all as specified. NOTE : Soil investigation will be measured and paid separately.(i) Size – As per Arch drawing(ii) Height – as per Drg(iii) Fdn – To be design as per SBC report with RCC framed construction.(iv) Plinth – Burnt Brick wk in CM 1:6(v) DPC – 40 mm thick PCC 1:2:4 with WPC(vi) Super Structure – All RCC structure to be M25 design mix burnt brick wk wall upto ceiling.(vii) Seismic Zone – Strengthening measures for Zone V(viii) Roof – 0.50mm thick Pre-painted Galvalume sheet with MS steel frame structure, (ix) Ceiling : False ceiling with powder coated snap grid frame work. (ix) Internal Plaster – Internal 15 mm thick in CM (1:6)(x) Flooring – Coloured vitrified tiles in all room, verandah & non skid ceramic tiles in toilet and bathroom over 15 mm thick screed bed in base of CM 1:6 over a layer of PCC 1:2:4 over sub base of 1:5:10.(xi) Dado/Skirting – Glazed ceramic tails over 10 mm thick cement screed in CM (1:3) up to lintel height.(xii) Joinery – Frames – pressed steel, shutter – Factory made flush door shutter (TD Drg No CESZ/2015/TD/03 Sheet 1/2 & 2/2) & PVC doors in toilet bathroom(xiii) Joinery Window – Steel Window with Guard bars/grill (TD Drg No CESZ/2015/TD/19 Sheet No 1R/3, 2R/3 & 3R/3)(xiv) Steel Guard – MS Guard bars to window(xv) Iron monger – Prefabricated aluminum anodized fittings. (TD Drg No CESZ/2015/TD/03 Sheet 1/2 & 2/2)(xvi) Plinth Protection – 75 mm thick PCC 1:3:6 over stone hard core.(xvii) Painting – Synthetic enamel paint on steel/wooden surface.(xviii) Finishes – Internal - 02 coats of oil emulsion distemper incl 1mm thick wall care putty over a coat of primer.External - 02 Coats of weather proof exterior emulsion over one coat of primer. (xix) Antitermite treatment- As per IS-6313 Part-II : 2001 (xx) Mosquito proofing - All external doors & Windows (xxi)18mm thick granite over CM 1:3 for steps(xxii) Sanatory Fitting – Vitreous China EWC, WHB ect of approved make including plumbing work (TD Drg No CESZ/TD-38 Sheet No 1/2& 2/2 andTD Drg No CESZ/TD-31 Sheet No 1/2& 2/2).(xxiii) Mosquito Proofing – All external Door and window. 3 NOTE: Schedule ‘A’ Part IItoIXare Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured. 4 Total amount of Sch ‘A’ Part II (Excavation and Earthworks) 5 Total amount of Sch ‘A’ Part III (Internal Electrification) 6 Total amount of Sch ‘A’ Part IV (Internal Water supply) 7 Total amount of Sch ‘A’ Part V (Road/Path/Culvert) 8 Total amount of Sch ‘A’ Part VI (Area Drainage) 9 Total amount of Sch ‘A’ Part VII (External Water Supply) 10 Total amount of Sch ‘A’ Part VIII (External Electrification) 11 Total amount of Sch ‘A’ Part IX (Refrigeration and water cooler) 12 Total amount of Sch ‘A’ Part X (Hot Water Supply) 13 SCH A PART X(Miscellaneous B/R and E/M works)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 6 signifies this fact only 14 M & L for boring 100 mm dia hole in all kind of soil upto maximum depth 10 meter or up to refuse (N=100) whichever meet earlier including collection of undisturbed sample from cohesive soil only conducting standard penitration test at 12 meter and 1.5 meter interval alternatively as per relevant IS code complete all as directed. 15 Conducting necessary lab test on selected soil sample (obtained from item here in before) as per relevent nature moisture content, bulk and dry density sleve and hydrometer analysis, liquid and plastic limit, SP gravity unconfined compressive test (UU) or direct consolidation test etc complete all as relevant IS codes or all as specified and directed. 16 Completion of field work & lab test result and submission of report in Per Job quadruplicate suggesting depth of foundation type of fundation and safe bearing capacity with CD-1 (one) copy complete all as specified and directed. 17 S&F new PVC cable Junction Box IP66 halogen free and weather proof for out door installation sizenot less than 200 x 150 x 100 mm suitable for street light incoming and outgoing cables up to 10 to 25 sqmm 4 core (with terminal) & inclusive of MCB SP 10 Amp, 60A 04 strip aluminium Bus Bar, including nuts,bolts,cable glands & MS clamps fixed to pole allas directed. 18 Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire unarmoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade passed throuh PVC conduit medium grade of size Min 20mm complete all as specified and directed. 19 Supply, install,testingand commissioning outdoor type LT outdoor panel of size 1.2m x 1.2m x 0.6m having IP 65 rating, factory made totally encloseddust and vermin proof , double steef shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having magnetic locking arrangement in both front and rear door painted with powder coated paint and Aluminium bus bar 200 amps suitable for 500 volts, 50 Hz , 3 phase 4 wire system , including gland packing/bushes for entry/exit of cable from panel and comprising with and including following accesories and mounted on PCC platform all around the panel board complete with the following items:-(Note : Foundation to be included in the quoted price)Incoming :-(a) MCCB, 4 Pole, 100-125A 415 V 36 kA - 01 no With thermal and magnetic releaseOutgoing :- (a)MCCB, 4 Pole, 63-100A 415 V 36 kA - 02 nos With thermal and magnetic release(b) MCB,TPN, 63A, 420 V, 18 kA- 03 Nos.(c) Phase indicator lamps (RYB) -set of 3(d) Aluminium bus bar 4 strip - 200 amps(Length should not be less than 0.8m) (e)Internal connection by Aluminium strip from mcb/mccb to busbar and busbar to mccb/mcb etc 20 M&L for horizantal boring/drilling hole mannual under the road in soft/loose soil without cutting/disturbing the existing road and inserting GI pipe 80/50/40/32mm bore for drawing the cables complete all as directed and specified. (Note: (i) Cost of acessories required for making hole/bore deemed to be included in the quoted rate.(ii) GI pipe has been measured and paid separately) 21 S&F RCC cable route indicator with embrossing mark as LT cable, of size75 cm x 15cm x 7.5cm complete all as specified and directed. 22 M&L for Cutting the existing 100mm dia DI pipe line and inserting Tee 100x100x50 mm dia with collars all as specified and as directed. 23 M&L for Masonry valve chamber of size 1000 x 1000 x 1000mm (internal dimensions) complete all as specified and as directed. 24 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and as directed. 25 S&F LED batten (1.2M) inverter type made of polycarbonate housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. 26 S&F 10W,LED, Energy saving new generation bulk head with IP66 protection and IK09 impact resistance suitable for surface and wall mounting applications. luminaire with opal diffuser having lumen output of 1100 lumens at a minimum system efficiency of 110 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 27 Supply and fixing9W LED Retrofit lampsCode: 9W NEO LED LAMP B22 6500Kof make Surya orequivalent from list of makecomplete including taking down old unsv fittings. 28 M& L for cutting of circular hole at any type of wall for fixing of exhaust fan of 300 mm sweep, grouting 4 no 100 long 12mm dia stud bolt including making good to disturb surface of wall and painting as per existing colour complete all as specified and as directed.
|
