|
Tender For Renovation Of Rw Division Office Balasore- 1 (A) Ground Floor (Super Structure) 2 Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead 3 12mm thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royalty and taxes of all materials with cost of all labour, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge 4 Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade design mix using portland slag cement to pile cap, pedestal, plinth beam, etc with 20mm downgraded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member not less than 45mm and finishing the exposed surface smooth, scaffolding, watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars. (Chhaja) 5 Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification 6 Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall 7 Painting with approved quality and shade of enamel paint two coats conforming to IS on steel work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification. 8 Dismentalling & Removing old Damage Tiled Flooring 9 Dismentalling & Removing old Damage Tile Cladding from Wall. 10 Providing, Fitting & Fixing of 8 mm. to 12mm. thick Vitrified Tile ( of size 600m.m x 600 m.m ) or equivalent make of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. 11 Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles. 12 Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge 13 Providing and fixing ply wood wall panneling using 19mm thick BWR ply wood of good qauality and make fixed to wall by means of SS 304 screws and pvc rawl plug and the exposed surface finished with 1.0 mm thick sunmica (Make: Green ply/ equivalent, Finish-Sapele QR) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. 14 Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2"0" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2"0"x2"0" with 12mm thick Prelaminated Particle Board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge 15 Supplying, fitting and fixing of 750mm high Dias table with provisions for drawer and shelves made out of 19mm thick BWR plywood finished with 4mm thick natural wood veneer with melamine polish (PU glossy polish) (Make: Green ply/ equivalent, Finish-Sapele QR) on external surface and 1.0mm thick high pressure laminates on inner surface including cost of all materials, cost of labour, conveyance, taxes, hardware fittings, etc. all complete 16 Providing fixing and fitting of OD 110mm dia P.V.C. SWR rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps ,Splash stone ,etc.complete fixed to wall with nail etc as per the direction of EIC including cost of all material with taxes labour T&P etc complete. 17 (B) First Floor 18 Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade design mix using portland slag cement to pile cap, pedestal, plinth beam, etc with 20mm downgraded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member not less than 45mm and finishing the exposed surface smooth, scaffolding, watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars. 19 Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification 20 Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead 21 12mm thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royalty and taxes of all materials with cost of all labour, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge 22 Painting with approved quality and shade of enamel paint two coats conforming to IS on steel work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification. 23 Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall 24 Dismentalling & Removing 2.50cm Thick grading Concrete from Roof. 25 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work 26 (C) Second Floor (Parapet & Terrace) 27 Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge 28 Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead 29 12mm thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royalty and taxes of all materials with cost of all labour, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge 30 Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall 31 Painting with approved quality and shade of enamel paint two coats conforming to IS on steel work to give an even shade with two coats of synthetic enamel paint over an under coat of primer of suitable shade of approved quality including cost of all materials with taxes and transportation all labour scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification. 32 (D) Parking Area 33 Earth work in excavation of foundation trenches in hard soil within initial lead and lift including dressing and leveling the bed upto the required depth and depositing the excavated materials away from the working area etc.complete as per the specification and direction of the Engineer-in-charge. 34 Supplying filling in foundation and plinth with sand in layers not exceeding 23cum (9") thick including watering and ramming with the cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc., complete as per specification and direction of the Engineer-in-Charge. 35 Providing and laying plain cement concrete 1:3:6 Nominal grade using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 40mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the E.I.C 36 Plain cement concrete (1:2:4) nominal mix as per Drawing and Technical Specification 37 Dismentalling & Removing old Damage Tiled Flooring 38 Cement Chequred tile (30CM x 30 CM) flooring with cement slurry and fixing in flooring on 25mm thick bed of cement mortar (1:1) mix and joints filled with gray cement slurry etc complete 39 (E) Compound Wall 40 Dismantling brick or stone masonary in lime or cement mortar above 3 mtr height including stacking the useful materials for reuse and removing the debris within 50m lead. 41 Dismantaling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead. 42 Earth work in excavation in foundation in all kinds of soil including earth mixed with boulder (except sheet rocks and boulder requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc., complete and as per specification and direction of the Engineer-in-Charge. 43 Supplying filling in foundation and plinth with sand in layers not exceeding 23cum (9") thick including watering and ramming with the cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc., complete as per specification and direction of the Engineer-in-Charge. 44 Providing and laying plain cement concrete 1:3:6 Nominal grade using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 40mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the E.I.C 45 Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade design mix using portland slag cement to pile cap, pedestal, plinth beam, etc with 20mm downgraded hard crusher broken granite material of approved quality & mixing in concrete mixers and compacting to proper shape and size level and plumbs and maintaining the clear cover of concrete member not less than 45mm and finishing the exposed surface smooth, scaffolding, watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P and centering, shuttering but excluding cost of material and labour for reinforcement bars. 46 Column footing Pedestal Below PB 47 Column above PB 48 Lintel 49 Compound Wall Supplying reinforcement of required diameter and approved quality (Fe 500-D) for the RCC items with straightening, cutting to sizes, bending and binding , lifting and placing in position as per design complete including cost of binding wires including all labour, sundries, T&P and scaffolding for all heights etc complete as per direction of the Engineer-in-charge as per approved specification 50 Fly Ash. brick masonry cement mortar ( 1:6 ) using Fly ash Bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75kg/cm2 including ,splays, cutting, circular moulding , curbelling , champering , watering , curing after immerging the bricks in nwater for six hours before use etc with all cost of materials,all materials for scafolding upto 5 mtr height , carriage, royalty,all taxes , labour, & T.&P. etc. complete, as per specification and direction of E.I.C. In Super Structure 51 Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead 52 16mm thick cement plaster (1: 6) rough surface of in side of brick wall including watering and curing with cost, conveyance, royalty and taxes of all materials and labour with T&P and scafolding as required for the work etc. complete in all respect as per specification and direction of Engineer-In-Charge . 53 12mm thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royalty and taxes of all materials with cost of all labour, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge 54 Fabricating and fixing SS Grill Gate with ornamental design for main entrance gate/ side gate /wicket gate etc made out with with 50 mm X 50 mm hollow square bar frame with double leaf and 12 mm SS square bars forming a square / design mesh, including cost of all material, cost of welding rod with all labour etc complete as per direction of the Engineer-in-charge as per approved specification. 55 Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 sqm. (10mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4)(1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge 56 Supply and fixing of electronic light lettering of standard size at Main gate above lintel level including required electrification, all taxes,material cost,labour charges,etc.complete as per direction of E.I.C. 57 Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall 58 (F) Drain 59 Earth work in excavation in foundation in all kinds of soil including earth mixed with boulder (except sheet rocks and boulder requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc., complete and as per specification and direction of the Engineer-in-Charge. 60 Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. 61 Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required) including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge. 62 R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in drain cover slab 63 Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) Please Enable Macros to View BoQ information
|
