Bids Are Invited For Hiring A Company For The Future And Eventual Creation And/Or Revitalization Of Recreati ... in Brazil

Work Detail

Recovery And Surface Leveling. Composed Of A Solid Surface Made Of Cementitious Mortar With Incorporated Synthetic Microfiber, With A Thickness Of Up To 7.0 Cm. Recovery Must Result In A Smooth, Level Surface With An Adequate Slope For Surface Drainage. Raw Material: Cementitious Mortar And Synthetic Microfiber. Safety And Quality Requirements: Not Applicable, Recreational Surface Construction. Suitable For Application In Recreational Environments, Such As Parks And Playgrounds. Composed Of The Service Of Applying Plates And/Or Layer(S) Of Engineering Polymer, On A Rigid Surface, Resulting In A Surface With Anti-Uv, Dissipative, Antifungal And Antibacterial Properties, With An Anti-Theft Type Device, Side Finishes And Playful Demarcation. Variation Of Up To 5% (Five) Percent Is Allowed In The Specifications. Service With Supply Of Materials, Accessories And Applied Products, Compatible And Necessary For The Application In A Way That Meets Its Purpose And User Safety.Raw Material: Polypropylene And Elastomer.Safety And Quality Requirements: Test That Proves Free Fall Impact Reduction Of 1.1M, Under The Terms Of Nbr 16071-3; Compressive Strength Test 1,735Kgf, Under Astm D695; Test That Proves That It Can Withstand High Temperatures Without Changes (Minimum Of 60ºc For 72 Hours); Test That Certifies As Non-Toxic In Accordance With Nbr 16071-2 With Nbr Nm 300-3; Control Test Of Finishing And Coating Materials - Classified Ii-A - Under Nbr 8660 - Astm E 662; Uv Resistance Test And Climatic Conditions - With No Significant Fading After 2,000 Hours Of Exposure, With And Below 10.50 For All Specimens Tested After 2,000 Hours, Under Astm G154; And Testing That Attests To Compliance With The Requirements Of Nbr 16040:2020 - Regarding The Determination Of Phthalate Concentration, Which Must Be Below The Limit Of Quantification, Construction Of Modular Surface - Multisport. Composed Of The Service Of Applying Plates And/Or Layer(S) Of Engineering Polymer, With An Anti-Theft Device And Side Finishes. Including The Application Of Flexible And Non-Toxic Resin To Demarcate The Modalities. Variation Of Up To 5% (Five) Percent Is Allowed In The Specifications. Service With Supply Of Materials, Compatible And Necessary For The Application In A Way That Meets Its Purpose And User Safety. Raw Material: Polypropylene And Elastomer. Safety And Quality Requirements: Test That Proves Free Fall Impact Reduction Of 0.7M, Must Be Below The Limit Of Quantification., 11/28/2025 - 16:27:48

Contact Information