|
Tender For Comprehensive Welcome Maint In Kabul Line Jcos/ Or And Fafa Accn And Otm In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10; 1 M&L rendering 15mm thick in cement mortar (1:6) finished even & fairon brick/concrete surfaces including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed. 2 All same as per srl item No 1 here-in-before but with 5mm thick in CM 1:3 in ceiling. 3 M&L preparation of newly plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over coat of primer complete all as specified and directed. 4 Complete removal of existing treatment of walls andapplying two coats of oil bound distemper over and including a coat of wall care putty 2mm thick and one coat of interior primer complete all as specified and directed. 5 M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed. 6 M&Lfor preparation of old plastered surface of wall/ceiling and applying a coat of oil bound distemper, complete all as specified and directed. . 7 M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, includingpreparation of surfaces. complete all as specified and directed. 8 M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 9 M&L for15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair mixed with liquid WPCas per manufacturers instructions including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.(Note : WPC shall be measured and paid separately under relevant item of this sch A/BoQ). 10 M&L preparation of new plastered surfacesand applying two coats of cement base paint over a coat of cement primer on external surfaces of walls complete all as specified and directed. 11 M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of cement primerall as specified & directed. 12 M&L preparation of old decorated services of walls by complete removal of existing treatment by using sanding machine and applying two coat ofweather proof exterior acrylic emulsion paint of approved make & shade including necessary scaffolding /Ladder etc complete all as specified and directed. 13 M&L in repairsdouble action floor spring hydraulically regulated made up of min 1.25 mm thick aluminum alloy sheet foundations box main body with stainless steel cover govering pivet made of brass complete all as specificed and directed. 14 S&F in repair Aluminium (extruded section body) door closer hydraulically regulated, designation no : 3, universal typeuniver type suitable for door shutter of 851 to 1000 mm in width and of weight between61 to 80 kg complete all as specified and directed 15 M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and after dismantling floor, hearth or wall tiling with cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed. 16 M&L Vitrifiedlight shade tiles600mm x 600mm, 8 to 10mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and after dismantling floor, hearth or wall tiling with cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and directed. 17 M&L Non skid ceramic coloured joint free tiles 400mm x 400mm, 6 to 7 mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and after dismantling floor, hearth or wall tiling with cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed. 18 S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps(as per sample) with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed. 19 S&F 75mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps(as per sample) with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed. 20 S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. 21 S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. 22 S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI P Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. 23 S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed. 24 S&F in repair 28mm dia MSdrapery curtain rod with colouredPVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified anddirected. 25 S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 26 S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/trenches or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed. 27 All as per srl item above here-in-before but 100mm bore 28 S&F100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed. 29 All as per item above here-in-before but 75mm bore. 30 S&F with 3mm thick ordinary sheet glass fixed with beads fixed with metal panel pins clips complete in squares not exc 0.50 sqm each pane including hacking out old broken glass from any type of frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. 31 S&F in repairs 600mm long tubular towel rails 20mm dia, D type between flanges of brass chromium plated complete all as specified and directed. 32 M&L in repair for looking mirror size 600x450 selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer including aluminium frame, complete all as specified and directed. 33 M&L 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed. 34 M&L kota stone slab 18-20 mm thick as a one piece area not exc 1.00 sqm in tread and riser of steps, skirting, dado and pillers laid over 20mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing and including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed. 35 M&L 16-18mm Udaipur Green marble stone slab machine cut, bedded jointed andpointed with white cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges match laid over and including 20mm thick screed bed in cement mortar 1:6 and including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed. 36 S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 37 S&F in repair 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed. 38 S&F in repair15mm bore dia stop valves cast copperalloys, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 39 S&F in repair 15mm bore diabib taps chromium plated cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed. 40 Renewing Glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed. 41 Taking down chowkats or frames not exceeding 1.5 Sqm each (w/o taking off shutters from the frames ) including builders hardware 42 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing 43 S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC C channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification. 44 S&F stainless steel hinges medium weight, 100 mm size fixed to PVC doors 45 S&F 75mm length of bolt Aluminium anodised,barrel tower bolts of extruded section and fixed to doors and windows where ever required complete all as specified and as directed 46 S&F for Anodised aluminium frame for doors, windows, ventilators & partition with one or more rebates including joining cleat for fixing etc. complete all as specified. 47 S&F Anodised aluminium window and ventilator shutters, single hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc as anodised fittings such as SS peg stays 150mm long (01 No), SS hinges type B-21 100mm long (02 Nos) suitable aluminium handle (01 No) complete all as specified. 48 S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. 49 S&F Sheet glass 5.5mm thick, ordinary quality and fixed with aluminium & rubber beading in square n exc 0.5 sq. m in each pane 50 S&F Galvanised mild steel wire clothof 0.50mm nominal dia of wire and average width of aperture 1.4mm and fixed with wire galvanisedwire staples including cutting, welding etc for steel windows/ventilators complete all as specified and direceted. 51 S&F in repairs vitreous china wash down water closet pedestal pattern white complete and connectin to single symphonic action type PVC flushing cistern 10 ltr capacity and fixed in floor with brass screwcomplete all as specified and directed by Engr-in-Charge Make : Hindware/Parryware 52 S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm 53 S&F in repair brass chromium plated shower rose of size 125 mm size all as specified and directed. 54 M&L Cement concreat type C2 (1:3:6) using 20m m graded stone aggregate75 mm thick as inpath / sub base and plinth protection to receive tiles complete all as specified and directed. 55 Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thicknessand removal of debris from site all as specified and directed 56 Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/blankets, any thickness, including cover fiilets complete all as specified and directed. 57 M&L for aluminium anodised snap grid frame work of size 605 x 605mm for false ceiling with hanging arrangement of 6mm dia G.I.( upto 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made outof GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed. 58 M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed. 59 Taking up or down steel tubing 15 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge 60 S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 15 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge 61 Taking up or down steel tubing 20 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge 62 S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 20 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge 63 Taking up or down steel tubing 25 mm bore and connection including cleaning for refixingor removal to store complete all as specified and as directed by Engineer-in-Charge 64 S&Fsteel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors,bore ofpipe 25 mm dia including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 complete all as specified and as directed by Engineer-in-Charge 65 S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 66 S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 67 S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 68 S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. 69 Dismantling of Brick tiles or terracing tiles, single layer on roofs. 70 S&F for Heat Resistant TerraceTiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same manner. 71 Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof). 72 Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight),complete all as specified and as directed. 73 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inserting APP membrane, concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. 74 M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified. 75 M&L PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and smooth complete all as specified and directed. 76 M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (Note: WPC shall be measured and paid separately) 77 Supply only of liquid water proofing compound complete all as specified and directed. 78 Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac.Notes:(1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. 79 Dismantling of old cabinet, cupboard/ wardrobe complete all as specified and as directed. 80 M & L with fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/ etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18mm thick WPC boards with white laminated colour on inside and all the outer faces to be covered with glossy laminate Color as approved by GE and paste to all exposed edge byedge Banding Tape and SS soft closing hinges, G/C/J profile handle etc and after provision of cabinet for keeping baskets/ drawers etc complete all as specified and directed. (Design and pattern as approved by GE). 81 S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing Asbestos sheet complete all as specified. 82 S&F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified. 83 S&F Solid PVC Wall Lining consisting of 5mm thick Plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling boarding, any description, fixed in any position incl dismantling existing wall panneling complete all as specified and directed.(Colour and pattern of PVC sheet shall be approve by GE) 84 Supply and fix 8mm thick PVC sheet fillet of width 35mmfor PVC wall penneling frame work fixed with Screw and gutty in any vertically and horizontally incl taking down existingframe work complete all as specified and directed. 85 Dismantling PVC water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store. 86 S&F rotantional moulded polythylene water storage tanks 500 ltr capacity(cylindrical vertical with closedtop ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 25mm bore complete allas specified and directed. 87 Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing to store. 88 S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity(cylindrical vertical with closedtop) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 25mm bore complete allas specified and directed. 89 Cleaning and removing all scale and dirt, etc from water tanks of RCC/PVC of exc 250 & n exc 500 Ltr capacity from mouth of circulating pipes with suitable chemical or solvent as per manufacturers instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete. 90 Cleaning and removing all scale and dirt, etc from water tanks of RCC/PVC of exc 500 & n exc 1000 Ltr capacity from mouth of circulating pipes with suitable chemical or solvent as per manufacturers instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete.
|
