Tender For Work Of Shifting The 33 Kv Power Line Passing Through The Railway Gate No. 185 Passing Through Th ... in India

Work Detail

Tender For work of shifting the 33 kV power line passing through the railway gate no. 185 passing through the industrial area near Orai, and for the work of widening/strengthening the road from Kailiya Salaiya to the border of M (excluding village Devgaon) fed from the 11 kV feeder Kailiya and Salaiya coming from the 33/11 kV power substation Kailiya. Work of power line laying work -2 Carriage of following line materials for 33 kv & 11 Kv from orai store to Pit Site & Dismantled Item from Site to Store Center Orai including measuring weiging loading unloading at both ends and proper stacking at safe site. 3 PCC POLE 8.5 MTR.LONG 4 A.C.S.R. WEASEL CONDUCTOR 5 ABC (3X95 + 1X70 + 1X16) SQ.MM 6 A.C.S.R. DOG CONDUCTOR 7 33 KV F Clamp for 11 Mtr Long STP Pole 8 33 KV STAY COMPLETE 9 33 KV CROSS-ARM 100x50 MM V-TYPE 10 STAY CLAMP 11 EARTHING COMPLETE 12 33 KV GUARDING ANGLE 13 G.I.WIRE 6 SWG 14 PG CLAMP FOR ACSR DOG CONDUCTOR 15 G.I. STAY ROD 16X1800MM 16 MS T-OFF CHANNEL 100X50X5X1300 MM 17 LT CLAMP FOR STP 18 Gaurding Angle SOxSOxSx2S00 mm 19 DISC FITTING 45KN (T&C) 20 DISTRIBUTION BOX 3 PHASE 21 11 KV POLYMER DISC INSULATOR (T&C) 45KN 22 11 KV V-TYPE STEEL CROSS-ARM 65X65X6MM 23 11 KV COMPOSITE POLYMER PININSULATOR 24 DISTRIBUTION BOX CLAMP 25 G.I.WIRE 8 SWG 26 EARTH ROD 2540X20 MM 27 T/F BASE ANGLE 65X65X6X2028 MM 28 EYE-HOOK 29 11 KV F Clamp for PCC Pole 8.5 Mtr Long 30 EARTH CLAMP FOR PCC POLE 31 GUARDING CLAMP FOR STP WITH N&B 32 M.S. DROPPER CHANNEL 100X50X5X2028MM 33 Stay Set Galvanised 16x1800 as pr ann-1 34 M.S. Top Channel I00x50x5x2240 mm 35 11 KV Stay Clamp for PCC Pole 8.5 M long 36 11KV BRACING ANGLE 37 STAY WIRE 7/10 SWG 38 DEAD END CLAMP 39 Carriage of Dismentled 33 Kv Line Items as per estimate/Site From Site to Store Center Orai 40 Carriage of Dismentled 11 Kv Line Items as per estimate/Site From Site to Store Center Orai 41 Receive Back Alluminium Scrap 42 Receive Back Iron Scrap 43 Receive Back ACSR Weasel Conductor 44 Receive Back LT ABC Old & Used 45 Receive Back 11 Kv Cross Arm Old & Used 46 Receive Back Old & Used STP Pole 47 PART-B 48 Supply of the following 11Kv line Items by Contractor as per RESSPO drawing & dimension:- 49 STP Pole (SP68) 13 mtr. Long 50 STEEL TUBLER POLE SP-55 11.00 MTR 51 CROSS ARM HOLDING CLAMP WITH SP-55STP Pole 52 STONE PAD 300X300X75MM 53 33 KV Polymer DISC INSULATOR (B&S) 70 KN 54 33 KV E-CLAMP 55 PIN INSULATOR 33 KV 56 GUARDING ANGLE HOLDING CLAMP 50X6M.M. 57 EYE BOLT WITH NUT 58 33 KV GI PIN WITH NUTS 59 ALUMINIUM PAINT 60 RED OXIDE PAINT 61 DANGER BOARD WITH CLAMP FOR 33 KVLINE 62 33 KV DISC FITTING SUSPENSION TYPE 63 33 KV NUMBER PLATE WITH CLAMP , N&B 64 BARBED WIRE 65 Base Angel 66 EARTH WIRE CLAMP 67 MS TOP CHANNEL 33KV 68 Nut-Bolts for Clamps & Channels 69 CROSS ARM HOLDING CLAMP FOR PCCPOLE 70 DANGER BOARD WITH CLAMP FOR 11 KVLINE 71 Insulated piercing connector 25-95/25-95 72 11 KV STAY LOOP INSULATOR 73 PART-C 74 Erection of the following supports after making of pits as per RESSPO norms & filling of pits by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of ST Pole structure as per RESSPO norms also (all type of paints, red oxide primer, nut, bolts & grouting material etc. will be provided by contractor). 75 PCC POLE 8.5 MTR.LONG 76 STP Pole (SP68) 13 mtr. Long 77 STEEL TUBLER POLE SP-55 11.00 MTR 78 A.C.S.R. WEASEL CONDUCTOR 79 ABC (3X95 + 1X70 + 1X16) SQ.MM 80 A.C.S.R. DOG CONDUCTOR 81 33 KV F Clamp for 11 Mtr Long STP Pole 82 33 KV STAY COMPLETE 83 33 KV CROSS-ARM 100x50 MM V-TYPE 84 STAY CLAMP 85 EARTHING COMPLETE 86 33 KV GUARDING ANGLE 87 G.I.WIRE 6 SWG 88 PG CLAMP FOR ACSR DOG CONDUCTOR 89 G.I. STAY ROD 16X1800MM 90 MS T-OFF CHANNEL 100X50X5X1300 MM 91 LT CLAMP FOR STP 92 Gaurding Angle SOxSOxSx2S00 mm 93 DISC FITTING 45KN (T&C) 94 DISTRIBUTION BOX 3 PHASE 95 11 KV POLYMER DISC INSULATOR (T&C) 45KN 96 11 KV V-TYPE STEEL CROSS-ARM 65X65X6MM 97 11 KV COMPOSITE POLYMER PININSULATOR 98 DISTRIBUTION BOX CLAMP 99 G.I.WIRE 8 SWG 100 EARTH ROD 2540X20 MM 101 T/F BASE ANGLE 65X65X6X2028 MM 102 EYE-HOOK 103 11 KV F Clamp for PCC Pole 8.5 Mtr Long 104 EARTH CLAMP FOR PCC POLE 105 GUARDING CLAMP FOR STP WITH N&B 106 M.S. DROPPER CHANNEL 100X50X5X2028MM 107 Stay Set Galvanised 16x1800 as pr ann-1 108 M.S. Top Channel I00x50x5x2240 mm 109 11 KV Stay Clamp for PCC Pole 8.5 M long 110 11KV BRACING ANGLE 111 STAY WIRE 7/10 SWG 112 DEAD END CLAMP 113 CROSS ARM HOLDING CLAMP WITH SP-55STP Pole 114 STONE PAD 300X300X75MM 115 33 KV Polymer DISC INSULATOR (B&S) 70 KN 116 33 KV E-CLAMP 117 PIN INSULATOR 33 KV 118 GUARDING ANGLE HOLDING CLAMP 50X6M.M. 119 EYE BOLT WITH NUT 120 33 KV GI PIN WITH NUTS 121 ALUMINIUM PAINT 122 RED OXIDE PAINT 123 DANGER BOARD WITH CLAMP FOR 33 KVLINE 124 33 KV DISC FITTING SUSPENSION TYPE 125 33 KV NUMBER PLATE WITH CLAMP , N&B 126 BARBED WIRE 127 Base Angel 128 EARTH WIRE CLAMP 129 MS TOP CHANNEL 33KV 130 Nut-Bolts for Clamps & Channels 131 Cross Arm Holding Clamp For PCCPole 132 Danger Board With Clamp For 11 KVLine 133 Insulated piercing connector 25-95/25-95 134 11 KV STAY LOOP INSULATOR 135 Grouting of PCC/STP Pole as per resspo norms 136 Concreting of stay as per resspo norms 137 Dismantling of 33 kv Lines 138 Dismantling of 11 kv Lines Please Enable Macros to View BoQ information

Contact Information