|
(L1) 4202.5504-38Mm (1.1/2) Fire Hose With 20M Length, Specification: Made With Textile Reinforcement Woven In High Tenacity Synthetic Wire With Internal Tube And External Coating In Nitrile Rubber, Manufactured In Diameter Of 38Mm (1.1/2), In Throws Of 20M, Must Have Minimum Resistance To Pressures Of 14Kgf/Cm² (Work), 28Kgf/Cm² (Test) And 42Kgf/Cm² (Rupture), With The Ends Tied With Quick Coupling Type Union (Storz Type Joints) In Type 40-B Brass, With Brand Certification Or Test Reports Carried Out By Institutes Nationally Recognized Certification Tests, In Red Color, Additional Features: Individually Relating The Results Obtained In Hydrostatic Testing Tests, Pressure Loss Testing, Rupture Testing, Abrasion Resistance Testing, Internal Diameter Testing, Adhesion Testing, Internal Tube Testing, Textile Reinforcement Aging Testing, Hot Surface Resistance Test, Type 4 Hose Accelerated Aging Test, Units. Measurement: Unit, (L2) 4202.5504-Fire Hose 38Mm (1.1/2) 20M Long, (L3) 4202.107351-Fire Hose, Use: Recommended For Environments Where Greater Abrasion Resistance Is Desirable Such As Industrial Areas And Fire Department, Dimension: Diameter: 2.1/2 (63Mm), Length: 20M, Material: With Textile Reinforcement Made 100% Of High Tenacity Polyester Yarn, Externally Coated With Blend Of Pvc And Nitrile Rubber And Internally With Synthetic Rubber Tube, Equipped With Quick Coupling Union (Storz), Tied On Both Sides Of The Hose, Color: Red, Features Additional: It Must Have High Resistance To Rupture, Abrasion And Chemicals, (L4) 4202.107351-Fire Hose, (L5) 4202.100519-Synthetic Foam Generating Liquid (Lge), Type: Sintex Afff/Arc, Use: Fire Fighting, Specification: Concentration 3% And 6%, Multipurpose, Firefighting In Hydrocarbons (Naphtha, Gasoline, Kerosene, Diesel Oil) And Polar Solvents (Methyl Alcohol, Ethyl Alcohol, Acetone, Isopropanol), Greater Fluidity Of Foam On The Surface Of The Burning Liquid, Possibility Of Use With Fresh, Sea And Brackish Water, Should Allow Joint Use With Dry Chemical Powder, Allowing For Better Synergism In Extinguishing, Better Performance In Fires With Liquid Spills, Quick Knock Down, Applications With Equipment Without Air Aspiration, Should Allow Use In Automatic Showers, Use In Portable Fire Extinguishers Or Pre-Mix Equipment, Better Vapor Sealing Due To The Formation Of An Aqueous Film, Improves Water Performance In Class A Fires, Such As Paper, Fabric And Wood, Packaging: 20 Liter Gallon, 11/28/2025 - 11:00:09, (L6) 4202.100519-Synthetic Foam Generating Liquid (Lge), (L7) 4202.100520-Foam Generating Liquid, Type: Class A, Specification: Concentration: 0.1% To 1%, For Penetration And Aftermath: 0.25% To 0.50%, For Extinguishing And Protection: 0.50% To 1%, Additional Characteristics: Foam-Forming Concentrate, Non-Toxic And Biodegradable, Which Gives Water Special Properties For Fighting Fires In Solid And Forestry Materials, Conveniently Diluted In Water, Altera Its Surface Tension Properties Give It Greater Penetrability In Solid Materials When Compared To Pure Water, Formation Of Foam That Retains Water For Longer On The Vertical And Horizontal Surface Of The Burned Material, Pro
|
