|
Tender For Repair/Renewal Of Furniture Under Ge (I) R&D Chandigarh; 1 Taking out/removal of existing tapestry cloth from cushion of sofa etc of any pattern/description, refixing of existing cushions in position duly covered withbest quality tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter by stitching etc for seat and back complete all as specified and directed. 2 Taking out/removal of existing cushion of sofa of any pattern/description, supplying and fixing 4" thick cushion best quality of density 32, Dunlop make covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat and back complete all as specified and directed. 3 Taking out / complete removal ofexisting tapestry cloth etc (seat , back and sides ) ofsingle seat sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hesian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foamcushioning of density 32,best qualitydunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. 4 Taking out / complete removal ofexisting tapestry cloth etc (seat , back and sides ) oftwo seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hesian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foamcushioning of density 32 best qualityDunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfacescomplete all as specified and directed. 5 Taking out / complete removal ofexisting tapestry cloth etc (seat , back and sides ) ofthree seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hesian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foamcushioning of density32 best qualityDunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfacescomplete all as specified and directed. 6 Taking out / complete removal ofexisting tapestry cloth etc (seat , back and sides ) offour seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hesian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foamcushioning of density 32 best qualityDunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. 7 Taking out unserviceable seat of chair of any size any description (chair revolving/chair visitors/chair executive/chair computer/ chair cushioned steel with arm/without arm off sizes) up holstering the same with foam seat 50mm thick 32 density on6 mm thick plywood commercial duly covered with tapestry cloth/rexine and labour for repair complete all as specified and directed 8 Taking out unserviceable back of chair of chair of any size any description (chair revolving/chair visitors/chair executive/ chair computer/chair cushioned steel with arm/without arm off sizes) up holstering the same with foam seat 50mm thick 32 density on 6 mm thick plywood commercial duly covered with tapestry cloth/rexine and labour for repair complete all as specified and directed 9 Taking out unserviceable foam cushion from arms of seat and S&F new foam cushion 25mm thick 32 density covered with tapestry cloth/ rexine in arms of chair revolving (chair visitors/chair executive/chair computer/ chair cushioned steel off sizes)and labour for repair of revolving chair complete all as specified and directed 10 Replacement of unserviceable hydraulic system of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed. 11 Replacement of unserviceable wheel of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed. 12 Replacement of unserviceable base of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed. 13 Replacement of unserviceable push back system of chair of any description and pattern (computer chair/revolving chair) complete all as specified and directed. 14 Replacement of old/unserviceable handle of chairs of any pattern and description (chair revolving/chair visitors/chair executive/chair cushioned off sizes) with soft handle of approved quality complete all as specified and directed 15 Denting chipped surfaces and preparing the surfaces/ground Almirah large with putty and applying two coats of Ist quality synthetic enamel paint internally including shelves by spray paintingOG/Silver colour complete all as specified and directed 16 Denting chipped surfaces and preparing the surfaces/ground Almirah largewith putty and applying two coats of Ist qualityhammer tone paint of any shadeexternally by spray painting complete all as specified and directed 17 Replacement & fixing MS CP handle of standard size for almirah (large/medium/small) and steel lockers complete all as specified and directed. 18 Replacement & fixing of lock (4 liver brass) including locking device plate and rod etc for almirah (large/medium/small) and steel lockers complete all as specified and directed. 19 Replacement & fixing MS hinges of standard size with and including taking out shutters etc and refixing duly welded and painted for almirah (large/medium/small) and steel lockers complete all as specified and directed. 20 Denting chipped surfaces and preparing the surfaces/ground Almirah medium with putty and applying two coats of Ist quality synthetic enamel paint internally including shelves by spray painting OG/Silver colour complete all as specified and directed 21 Denting chipped surfaces and preparing the surfaces/ground Almirah medium with putty and applying two coats of IIst quality hammer tone paint of any shade externaly by spray painting complete all as specified and directed 22 Removing of unserviceable old defaced mirrors unserviceable back plywood of mirror with frame of table dressing gents and supply and fixing for sheet glass electro copper plated mirror 5 mm thick and plywood commercial BWR grade 6 mm thick for back side to mirror frame and fixing to table all with and including polishing entire wooden surfaces complete all as specified and directed 23 Replacement of old lock steel and fixing for table of any description and pattern off sizes( Table officer/clerk/ executive/ table computer) complete all as specified and directed. 24 Denting chipped surfaces and preparing the surfaces/ground Almirah small and steel lockers with putty and applying two coats of Ist quality synthetic enamel paint internally including shelves by spray painting OG/Silver colour complete all as specified and directed 25 Denting chipped surfaces and preparing the surfaces/ground Almirah small and steel lockers with putty and applying two coats of Ist quality synthetic enamel paint externally by spray paintingOG/Silver colour complete all as specified and directed 26 Removing of unserviceable old defaced mirrors unserviceable back plywood of mirror with frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5 mm thick and plywood commercial BWR grade 6 mm thick for back side to mirror frame and fixing to table with and including polishing entire wooden surfaces complete all as specified and directed.
|
