|
Tender For Repair Of Roof Sheet, False Ceiling, Paneling And Other B/R Work, Joinery, Plastering, Flooring And Sanitary Fittings In The Aor Of Age B/R-Ii Under Ge 969 Ews(Job No.Stpp 2025-26 Ser No. 01); 1 Dismantling plain or corrugated steel sheeting, any gauge , thickness, including Nainital or similar pattern roof covering etc. complete all as specified and directed. 2 S&F 0.63 mm thick galvanised , corrugatedmild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L- type or J- type or cranked hook bolts in lie of screwin roofs , walls etc. with grade of zinccoating 275 etc complete all as specified . 3 S&F 0.63 mm thick plain ,galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip , straight flashings and fixed with coach screws, washers, and L-type or Jtype or cranked hook bolts in lie of screw in roof , wall etc.(length and girth as fixed ) with grade of zinc coating 275 mm etc completeall as specified. 4 Refixing for galvanised, corrugated mild steel sheeting with two corrugations sidelap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with gradeof zinc coating 275 complete all as specified and directed. 5 M&L for preparation of newzinc (or galvanised) surfaces to receive painting , by a coating with moderate solution including washing and cleaning and applying two coat synthetic enamel paint in camouflaging pattern over a coat ofzinc chrome, red oxide etc complete all as specified. Note: camouflaging pattern shall be directed in GE. 6 S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tappingscrews complete all as specified and directed. 7 Refixing for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tappingscrews as specified.complete as specified and directed. 8 S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tappingscrews as specified.complete as specified and directed. 9 Dismantling timber scantlings 40 sq. cm and over in section, in any position complete as specified and directed. 10 M&L for Second class soft-wood clean sawn in scantlings complete as specified and directed. 11 Dismantling of boarding, any description , fixed in any position with nails etc complete all as specified . 12 M&L for refixing only weather boarding, 25 mm thick second class soft wood, wrought both sides, V-jointed to give 20mm laps and fixed complete as specified and directed. 13 M&L forweather boarding, 25 mm thick second class soft wood, wrought both sides, V-jointed to give 20mm laps and fixed complete as specified and directed. 14 M&L for 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as use in eaves board complete as specified and directed. 15 M&L for painting wooden newly untreated surfaces two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise descri-bed,over 10cm width or girth complete as specified and directed. 16 M&L for painting wooden old surfaces two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise descri-bed,over 10cm width or girth complete as specified and directed. 17 M&L for plain fillets. square, rectangular or triangular exc 13 & n.exc 25 sqcm in section, use in second class softwood clean sawn,secured with nails or brads complete as specified and directed. 18 M&L for plain fillets. square, rectangular or triangular Exc 6 & n.exc 13 sqcm in section, use in second class softwood clean sawn,secured with nails or brads complete as specified and directed. 19 Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed work complete as specified and directed. 20 M&L for 6 mm (5 No. of ply ) thick plywood , grade BWR, type BB fixed with nails to timber framedworkas in walletc complete all as specified. 21 M&L for veneered decorative 4mm plywood, grade 1 (with BWR resin) with decorative face veneerson onefaces; fixed with wallscrews to timber frame work complete all as specified and directed. 22 M&L for veneered decorative 4mm plywood, grade 1 (with BWR resin) with decorative face veneerson onefaces; fixed with ceiling/flat or sloping screws to timber frame work complete all as specified and directed. 23 Demolition wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness complete all as specified and directed. 24 Demolition concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 25 M&L hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a truesurface complete all as specified and directed. 26 M&L for 100mm thick cement concrete 1:4:8, type D- 2 (using 40mm graded stone aggregate) as use in sub base complete all as specified and directed. 27 M&L for 100mm thick cement concrete 1:2:4, type B1 (using 40mm graded stone aggregate) in sub base complete all as specified and directed. 28 M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed. 29 Non - skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 30 M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 31 M&L for vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 32 M&L for vitrified ceramic dark shade 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm as in skirting / dado over 10 mm thick rendering incement mortar 1:4,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. 33 M&L for glazed ceramic tiles 450mmx 300mm x 7mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surface complete all as specified and directed. 34 Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing), removing serviceable tiles to store andrubbish off the premises complete all as specified and directed. 35 Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed. 36 Taking down chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed. 37 Refixing in same opening chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed. 38 S&F for steel work such as in hold fasts conforming to similar articles Fe-290 Gde E-165, complete all as specified. 39 M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in hold fasts/ bed blocks/ coping etc. complete all as specified. 40 S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. 41 S&F for factory made solid PVC moulded with particle board core door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawing complete all as specified and directed. 42 M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed 2nd class softwood complete all as specified and directed. 43 M&L for plain, framed, panelled shutters 2nd class soft (any number of panels), with panels of timber flat on bothsides (feather edged), or of veneered particle board medium density, wood particle boardwith commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. 44 M&L for glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. 45 S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 46 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. 47 M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed. 48 S&F in repair butt hinges 75mm long, medium weight, cold rolled mild steel, and fixed. complete as specified and directed complete all as specified and directed. 49 S&F in repair butt hinges 100mm long, medium weight, cold rolled mild steel, and fixed complete all as specified and directed 50 S&F in repair aluminium handles 150mm long, cast type, stove enamelled black complete all as specified and directed. 51 S&F in repair Aluminium anodised, barrel tower bolts 100mm long of extruded section and fixed complete all as specified and directed. 52 S&F in repair aluminium handles 100mm long, cast type, stove enamelled black complete all as specified and directed. 53 S&F in repair Aluminium alloy 150mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 54 Demolition of PCC block or stone/ boulder masonry, built in cement mortar 1:4 complete all as specified and directed. 55 M&Lfor precast cement concrete1:3:6, type C1 (using 20 mm graded stone aggregate) block masonrywith solidblocks, exc. 10 cm in width andsetting in mortar 1:4complete all as specified and directed. 56 Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbingdown with water etc complete all as specified. 57 M&L for 15 mm thick renderingonother than fair faces of brick work or concrete surfaces in cement mortar 1:4 finishedthe surfaces even and smooth without using extra cement etccomplete all as specified . 58 M&L for 10 mm thick renderingonother than fair faces of brick work or concrete surfaces in cement mortar 1:4 finishedthe surfaces even and smooth without using extra cement etccomplete all as specified . 59 M&L for painting preparing newuntreated plastersurface of walls and applying two coat of cement based paint in comoflaying pattern etc complete all as specified. 60 M&L for painting preparing new untreated two coat oil bound distemperpaintonwalls complete as specified and directed. 61 M&L for painting preparing oId surface of walls and applying two coat of cement based paint in comoflaying pattern etc complete all as specified. 62 M&L for painting preparing Old surface two coat oil bound distemperpaintonwalls complete all as specified and directed. 63 M&L for painting preparing Old surface two coat oil bound distemperpaintonceiling complete all as specified and directed. 64 Takingup or down20 mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 65 S& F 20 mm tubes , medium grade galvanised , with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified . 66 Takingup or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 67 S&F 15 mm tubes , medium grade galvanised , with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified . 68 S&F in repairs15 mm stop/ gate valves cast copper alloy,but fancy type chromium plated ,screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 69 S&F in repairs 15 mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot orCold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. 70 S&F in repairs 15 mm Bibtaps , cast copper alloy fancy type , with crutch or butterfly handles, screwed foriron pipe or for brass ferrule and fixed complete all as specified. 71 S&F in repairs PVC valve less , symphonic action type, flushing cistern, low level 10 litres capacity white , with inlet ball valve , float and handle including brackets complete all as specified . 72 S&F in repairs vitreous china wash down water closet pan ( pedestal pattern ), white , including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc complete all as specified and directed. 73 S&F in repairs vitreous china bowlurinal flat back , size of 465 x355 x 265 mm white (minimum with gratingand union for discharge pipe , including connections to flushing pipe and outgoing pipes complete all as specified . 74 S&F in repair vitreous china wash basin, white , flate back, size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand and32 mm waste fittings, brass, chromium plated for glazed ware basin, etc with long screwed shanks and flu-nuts, flange end bedded in red lead cement and other end fixed complete all as specified . 75 S&F in repair vitreous china squatting pan,Orissa pattern, size 580 x 440 mm white, with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified . 76 Demolition and breaking up110 mm diaCast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. 77 M&L for reinforced concrete pipes150mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed. 78 M&L for 100 mm outlet diameter of cast iron floor trap , with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 etc complete all as specified. 79 Dismantling water tanks capacity exc 500 & n. exc 1000 litresetccomplete all as specified. 80 S&F of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position capacity500 Ltrscomplete all as specified and directed. 81 S&F in repair Anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling, complete all as specified. 82 M&L for fixed in repair 10 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framed work in ceiling flat or sloping etc, complete all as specified. 83 S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min weight 300 grms) etc complete all as specified and directed. 84 S&F in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 grams) etc complete all as specified and directed. 85 M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20 mm gradedstone aggregate) inplinth protection andhard standingfinish even and fair w/o using extra cement complete as specified and directed. 86 M&L for 18/19mm thick block boards, grade 1quality, exterior grade, commercial type, fixed with screws to timber complete all as specified and directed. 87 S&F decorative laminates type I, 1.5mm thick (High Glossy Finish), or surfacefinish, colour and pattern as approved by GE complete all as specified and directed. 88 M&L for 18/19 mm thick PVC shutter provided one side with one coating of Ultra voilet chemical glossy mat finish including 100% termite/waterproof, fire retardant eco friendly weight not less than 12Kg per sqm complete all as specified including 0.8mm thick PVC edge binding tape around the thickness of PVC shutter edge complete all as specified and directed. 89 M&L for 18/19mm thick prelaminated particle board in repair, exterior grade,prelaminated bothside with decorative choice lamination, fixed with nails to timber frame work complete all as specified and directed. 90 S&F in repairs 40 mm continuous (Piano) hinges, mild steel , bright finish or electrogalvanixed complete all as specified 91 S&F in repairs 150 mm extruded brass handles, fabricated type polished complete all as specified and directed 92 S&F in repairs 50 mm brass lock, cupboard, Grade I in 2 levers completed all as specified and directed.
|
