|
Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 1.50M - 2 Uses. Af_03/2024, Demolition Of Perforated Block Masonry, Manually, Without Reuse. Af_09/2023, Demolition Of Ceramic Coating, Mechanized Using A Hammer, Removal Of Windows, Removal Of Crockery, Removal Of Doors, Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Sealing Masonry Made Of Solid Ceramic Blocks Of 5X10x20cm (10Cm Thickness) And Laying Mortar Prepared In A Concrete Mixer. Af_05/2020, Cutting And Bending Of Ca-50 Steel, Diameter Of 8.0 Mm. Af_06/2022, Cutting And Bending Of Ca-60 Steel, Diameter Of 5, Concrete Fck = 25Mpa, Trace 1:2, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 600 L Concrete Mixer. Af_05/2021, Surface Waterproofing With Emulsion Asphalt, 2 Coats. Af_09/2023, Launch Using Buckets, Thickening And Finishing Concrete Structures. Af_02/2022, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Bridge, Simple Straight Foot, 4 Uses. Af_09/2020, Cutting And Bending Of Ca-25 Steel, Diameter Of 10, Concreting Of Slabs In Single-Family Buildings Made With A Maneuverable Formwork System, With Pumpable Machined Concrete Fck 25 Mpa - Laying, Thinning And Finishing. Af_09/2024, Pre-Molded Lattice Slab (Slabs + Joists) For Lining, Unidirectional, Overload Of 100 Kg/M2, Range Up To 6.00 M (Without Laying), Manufacture Of Formwork For Pillars And Similar Structures, E=25 Mm. Af_09/2020, Ribbed Welded Steel Mesh, Ca-60, Q-92, (1, 48 Kg/M2), Wire Diameter = 4, 2 Mm, Width = 2, 45 Including Locking, Masonry Sealing Of Vertically Drilled Ceramic Blocks Measuring 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Lintel Cast In Situ In Concrete, Thickness Of *15* Cm. Af_03/2024, Reinforcement Molded In Place In Concrete, Plating Applied To Masonry (With The Presence Of Gaps) And Concrete Facade Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, Plaster Or Single Putty In 1:2:8 Mortar Mix, Mechanical Preparation With 400 L Concrete Mixer, Manually Applied To Facade Panels With Gaps, 25 Mm Thick, Access Via Scaffolding. Af_08/2022, Ceramic Coating For Internal Walls With Enamelled Plates Of Dimensions 60X60 Cm Applied At Half Height Of The Walls. Af_02/2023_Pe, Plastering With Latex Putty, Wall Application, Two Coats, Manual Sanding. Af_04/2023, Ceiling Application, Mortar Mix 1:3 (In Volume Of Cement And Medium Wet Sand) For Subfloor, Mechanical Preparation With 600 L Concrete Mixer. Af_08/2019, Ballast With Granular Material, Applied On Floors Or Slabs On Ground, Thickness Of *5 Cm*. Af_01/2024, Q-138, (2, 20 Kg/M2), 45 M, Mesh Spacing = 10 Af_02/2023_Pe, 7Cm High Ceramic Plinth With Enamelled Plates Measuring 60X60cm. Af_02/2023, Granite Sill, Width 15 Cm, Thickness 2.0 Cm. Af_09/2020, Manufacture And Installation Of Entire Scissors In Unprepared Wood, Vain D
|