Bids Are Invited For Electronic Bid, Lowest Price Type”, With Judgment At The Lowest Price Per Item, Aiming ... in Brazil

Work Detail

Pedal Bucket / Trash Bin 40 Lts, Hospital Crib With Grids Carbon Steel Structure Made From 1020 Steel Plate, Thickness Of 0.9 Mmelectrostatic Epoxy-Powder Painting In White Colorsliding Grids With Locking By Pin-Spring Systemmaximum Load: 130 Kginternal Dimensions: 1.30M 64 Cmexternal Dimensions: 1.37M Technical Specifications · Flat Bottom In Horizontal Position · Capacity: 3500Ml (3.5 Liters) · Dimensions: (40X28) Cm · Orifice Diameter: 22 Cm, Anesthesia Apparatus With / Microprocessed Equipment To Serve Neonatal, Pediatric, Adult And Morbidly Obese Patients / Structure In Non-Oxidizing Material / With Shelf For Monitor Support / At Least 2 Drawers And Fixed Work Table / With Swivel Casters / With Self-Test System. Monitor From The Same Brand As The Anesthesia Machine). Accessories: 01 (One) Complete Autoclavable Patient Circuit For Adult Use, 01 (One) Complete Autoclavable Patient Circuit For Pediatric/Neonatal Use; 1 Balloon For Adult Patients; 1 Bullet For Pediatric Patients; 1 Balloon For Neonatal Patients; 1 (One) Sevoflurane Vaporizer, The Vaporizer Must Be The Same Brand As The Anesthesia Device To Avoid Incompatibilities, 1 (One) Set Of Braided Nylon Hoses With Thread Connection For Medicinal Gases O2, N2o And Compressed Air, Each With A Minimum Of 4.5 Meters In Extension And 02 (Two) Universal Flow Sensors For Adult, Pediatric And Neonatal Patients. Electrical Power Supply 220 V Or Automatic Bivolt System With Voltage 100 – 240 V. Full Description According To Terms Of Reference, Surgical Table With Electro-Hydraulic Drive System, Driven By Wired Remote Control; It Must Have A Radio-Transparent Top And Viscoelastic Material Mattress; Base Made Of Stainless Steel Or Resistant Material; Casters Of A Minimum Of 3” And A Maximum Of 5”, Protected (Not Apparent); The Top Must Be Divided Into A Seat, Back Support, Split Legs And Head Support; Back Movement Of At Least 65° Upwards And At Least 35° Downwards; Articulated Head Support With Manual Operation Allowing A Minimum Angle Of 85° Down And 35° Up; Detachable Split Leg Support With Individual Movements With Manual Control, Allowing A Minimum Angle Of 85° Downward; Enable Longitudinal Movement Of The Top, With Displacement Electronically Activated On The Remote Control Or Control Panel Of At Least 300 Mm Of Travel; It Must Have Height Adjustment With Electronic Activation Via Remote Control Or Control Panel, With Height Adjustment, Return Of 740 Mm Or Less And Elevation Of At Least 1050 Mm; It Must Have Lateral Inclination Adjustment With Electronic Activation Via Remote Control, With The Possibility Of Adjustment Of At Least 22° To The Right Side And 22° To The Left Side; It Must Have Trendelemburg / Reverse Trendelenburg Movement With Electronic Activation Via Remote Control Of At Least 30°; The Minimum Length Of The Table Must Be 2,000 Mm, Including Head And Leg Supports; Minimum Table Width Of 500 Mm Without The Side Rail And With The Rail Of At Least 550 Mm; Minimum Load Capacity Of 225 Kg In Position

Contact Information