|
Notebook Type Microcomputer, Processor: Intel I5 Or Amd Ryzen 5, Penultimate Or Last Generation Of Processors (From Processor Manufacturer), Minimum Clock Of 2600 Mhz, 8Mb Of Cache Or Higher. Installed Ram Memory: Minimum 8Gb Ddr4 Expandable Up To 16Gb Of Ram Memory. It Must Have Two Memory Banks. Dual Chanel Configuration, No Memory Soldered On The Motherboard Being Allowed. Internal Storage: Ssd Type (Solid State Disk), Minimum 256 Gb. Video Interface: Shared Video Controller; Support Allocation And Supply Of Minimum Memory Of 2048Mb.Monitor: Led Screen, Minimum Of 15 Inches Diagonally, Minimum Resolution Of 1920 With Internal Speakers, Electrostatic Touchpad, 10/100/1000Mbp/Sps Network (Rj45), Wifi Lan Connection (802.11B, G, N, Ac), Webcam 1.3 Mpixels Or 720 Hd. Internal Microphone. Bluetooth Integrated Into The Case. Four Usb Ports (Being At Minimum 2X Usb 3.1 +1X Usb 3.2Type C), One Hdmi Digital Video Output, One External Microphone Input, One Headphone Output. Operating System, Software And Drives: Windows 10 64Bits Professional Operating System, In Portuguese, With Usage License And Coa Label Or Number Recorded In The Bios. Hardware Comdrivers From Manufacturer For Operating Systems, Windows 10 64Bits Professional. The Equipment Must Be Accompanied By An Operating System Recovery System On The Hd Itself. Battery: Rechargeable With Support For A Minimum Of 4 Hours Of Operation. Reusable Connector Without Loss Of Characteristics Simple And Quick Assembly Compatible Optical Fiber Diameter: 125Μm Pre-Polishing: Upc Installation Time: 3 Minutes, Wall Rack, Closed 12 Us - Lot 1, 19 Inch, Closed 12 Us (Included 2 Rack Shelves And A Line Filter With 6 Outlets)*** Item For Exclusive Use In The Structured Cabling Price Register ***, Access Switch, Have Internal Power Supply That Works At 100V-240V, 50/60 Hz, With Automatic Detection Of Voltage And Frequency. Implement Capability To Supply Po Power When The Switch Is Turned On, Without The Need To Wait For Initialization, Based On The Last Po State Salvo.Implement Preservation Of Poe Power Delivery To Devices Even During Switch Reset.Implement Power Over Ethernet (Poe) According To The Ieee 802.3Af Standard On All 1000Base-T Ports, With A Minimum Of 370W Of Power Available To Poe Devices Through Internal Source.Implement Power Over Ethernet Plus (Poe+) According To The Ieee 802.3At Standard On All 1000Base-T Ports, With At Least 370W Of Power Available For Poe Devices Through An Internal Source. Have At Least One Usb Port For File Transfer. Have 68 Gbps Of Switch Fabric. Have Packet Forwarding Capacity Of At Least 50 Mpps Using 64 Byte Packets.Automatic Mdi/Mdix Detection On All 10/100/1000Base-T Rj-45 Ports.Have Console Port With Rj-45 Or Db9 Male Connector.Have Leds Indicating Power Supply Operation And Port Status.Have 24 10/100/1000Base-T Ports Active Simultaneously, With Rj-45 Connector. Have 4 (Four) 1000/2500Base-X Ports Active Simultaneously, Based On Sfp, Must Have The Same Support Slot
|
