|
Supply And Placement Of Work Sign Made Of Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats., Construction Shed For Storage And Tooling Type-I, Internal Area 14, 52M2, In Resin Plywood Sheet, Including Furniture (Small Work, Effective Up To 30 Men)., Temporary Connection With Overhead Power Input, Cemig Standard, Installed Load From 15.1Kva To 30Kva, Three-Phase, With Underground Output, Including Pole, Meter Box, Circuit Breaker, Bus Bar, Grounding And Accessories., Temporary Water Connection For Site, Including Hydrometer And Easel For Water Measurement - Main Entrance, In Galvanized Steel Dn 20Mm (1/2) - Dealership Standard., Mechanized Demolition Of Concrete, Without Frame, With Electrical Equipment, Including Removal And Stacking, Excluding Transportation And Removal Of Demolished Material., 11/26/2025 - 13:43:58, 11/26/2025 - 13:43:59, 11/26/2025 - 13:44:00, Removal Metallic Fence Manual, With Reuse, Exclusive Transport And Removal Of Non-Reusable Removed Material., Removal Of Metal Or Wooden Post, Including Cabling, Lighting., Transport Of Material Of Any Nature By Truck, Distance Greater Than 20Km And Less Than Or Equal To 30Km, Within The Urban Perimeter, Excluding Loading, Including Unloading., Loading, Maneuvering And Unloading In A 10 M³ Dump Truck -Loading With Loader (Bucket From 1.7 To 2.8 M³ / 128 Hp) And Free Unloading (Unit: M3). Af_07/2020., Mechanical Excavation Of 1St Category Material, Including Loading On Truck, Exclusive Transport And Unloading., Maneuvering And Unloading Of Soil And Granular Materials On 10 M³ Dump Truck - Loading With Loader (Bucket Of 1, Regularization And Mechanical Compaction Of Land With Vibrating Roller, Excluding Deforestation, Destocking, Cleaning/Mowing The Land., Conventional Location Of Work, Using Jig Of Pointed Running Boards Every 2.00M - 2 Uses. Af_10/2018., Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.50 M. Af_02/2021 - Foundation Footings., Manual Backfilling., Formwork And Formwork For Girder/Block With Board And Batten, Reuse (3X) (Foundation)., Cutting And Bending Of Ca-50 Steel, Diameter Of 10.0 Mm. Af_06/2022., Diameter Of 12.5 Mm. Af_06/2022., Diameter Of 6.3 Mm. Af_06/2022., Concrete Fck = 25Mpa, Mixture 1:2, 3:2, 7 (Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 400 L. Af_05/2021., Cutting And Bending Of Ca-60 Steel, Diameter Of 5.0 Mm, Used In Various Structures, Except Slabs. Af_12/2015., Crushed Ballast With Crushed Stone Number 2 And 3, Including Compaction And Manual Piling, Thickness 5Cm., Ca-60 Steel Mesh Armature, Welded Type Q-138, Diameter Ø4, 2Mm, Weft With Dimension (100X100)Mm, Including Spacer, Exclusive Concrete., Structural Concrete Floor, Pumped Machined, With Fck 30Mpa, Including Laying, Densification And Finishing, Thickness 10Cm, Including Polyurethane-Based Sealant, Including Expansion Joints., Mechanized Concrete Surface Polishing, Including Concrete Finishing In Laser Leveling (Zero Level)., Door To Fence, With One (1) Sheet, Size (90X210)Cm, In Galvanized Wire Mesh With 2 (50.8Mm) Diamond Mesh And Bwg12 Wire (2.77Mm), Exclusive Of Painting, Including Fixing And Repair
|
