|
Extra Tall Cabinet With Two Doors - Mdp (L=800 Mm, D=500 Mm, H=2100 Mm), With The Following Minimum Features: Top Top Made With Medium Density Particleboard - Mdp), Selected From Reforested Eucalyptus And Pine, Bonded And Consolidated With Synthetic Resin And Thermo-Stabilized Under Pressure, 25 Mm Thick, Coated On Both Sides With Thermo-Pressed Melamine Film 0.2 Mm Thick, Textured, Semi-Matte, And Anti-Reflective. The Sheets Must Have A Minimum Density Of 565 Kgf/M³, Perpendicular Tensile Strength Kgf/Cm² = 3.1, Static Flexural Strength Kgf/Cm² = 143, Surface Tensile Strength Kgf/Cm² = 10.2 In Accordance With Standards Nbr 14810-1 Terminology, Nbr 14810-2 - Requirements And Nbr 14810-3 Test Methods. The Edge That Follows The Entire Contour Of The Top Is Topped With Polystyrene Tape With A Minimum Thickness Of 2.5 Mm, Glued With Hot Melt Adhesive, With Rounded Edges And An Ergonomic Radius Of 2.5 Mm In Accordance With Abnt Standards. Doors Made With Medium Density Wood Particle Board (Mdp), 18 Mm Thick, Semi-Matte And Anti-Reflective. The Sheets Have A Minimum Density Of 575 Kgf/M³, 6, Resistance To Static Bending Kgf/Cm² = 163, 2 In Accordance With Standards Nbr 14810-1 - Terminology, Nbr 14810-2 - Requirements And Nbr 14810-3 - Test Methods. The Edge That Follows The Entire Contour Of The Door Is Covered With Polystyrene Tape With A Minimum Thickness Of 2 Mm, With Rounded Edges And An Ergonomic Radius Of 2 Mm In Accordance With Ergonomic Standards Nr-17. The Pair Of Doors Is Supported On Eight Top Hinges (4 Per Door)..., Base Cabinet With Two Doors - Mdp (W=800 Mm, H=740 Mm), And Anti-Glare. The Sheets Must Have An Average Density Of 565 Kgf/M³, Perpendicular Tensile Strength Kgf/Cm² = 3.1, Perpendicular Tensile Strength Kgf/Cm² = 3.6, With Rounded Edges And An Ergonomic Radius Of 2 Mm In Accordance With Ergonomic Standards Nr-17. The Pair Of Doors Is Supported On Four Top Hinges (2 Per Door), In..., Reinforced Steel Shelf With 06 Trays, With 02 X-Shaped Reinforcements On Each Side And 01 X-Shaped Reinforcement On The Bottom. Angle Plate 14, Trays Plate 22. Painting: Electrostatic Powder. Color: Standard Of The Requesting Body/Entity. Approximate Dimensions: 2000 X 920 X 400 Mm. Approximate Weight Capacity For Trays: 100 Kg Per Tray. Steel Sheets With Anti-Rust Treatment With A Textured Finish In The Standard Color Of The Requesting Body/Entity. Minimum Warranty Of 01 (One) Year. Unit., 3-Seater Director Stringer In Courvin - Backrest 43 L X 45 H And Seat 50 L With A Density Of 50 To 55 Kg/M3. Anatomically Shaped With An Average Thickness Of 50 Mm. Finishing Of The Seat And Back In The Same Material As The Covering Structure In 50X50 Mm Square Industrial Steel Tube, Internal Wall With A Thickness Of 1.50 Mm, Which Connects And Structures The Spar Feet. Chrome Feet And Regulating Shoes. Fitting The Feet To The Crossbeam Made Of Rectangular Industrial Steel Tube Sae 1020 Measuring 30X70 Mm And Having A Wall Of 1.20 Mm. Black Structure. Comply With Standards (Abnt). Unit., 11/25/2025 - 10:22:13, 11/25/2025 - 10:22:34, 11/25/2025 - 10:23:01, 11/25/2025 - 10:23:32
|
