|
The Subject Of The Public Contract Is The Comprehensive Supply Of A Compression System For H2 Compression For The Development Environment Of H2 Technologies To The Headquarters Of Apt, Spol. S R.O., U Tesla 470/5, Hloubětín, 198 00 Prague 9. The Order Will Be Implemented As Part Of Project Tn02000007 Entitled National Center For Hydrogen Mobility In The Program For The Support Of Applied Research, Experimental Development And Innovation Of The National Center Of Competence In Sub-Project Dp008 Entitled Ecosystem Of Filling Hydrogen At Speeds Exceeding 60 G H2/S. Project Tn02000007 National Hydrogen Mobility Center Is Co-Financed With State Support From The Technology Agency Of The Czech Republic As Part Of The National Center Of Competence Program. Device Requirements: Container Design For Installation In An External Environment. The Design Must Enable Autonomous Operation Of The Compression System. In Particular, They Include: Power Supply System; Operational Cooling; Control System – Frequency Converter, Controlled Valves; Safety System – Emergency Stop, Detection Of H2 Concentration In The Air, Emergency Ventilation, Maximum Temperature, Minimum H2 Inlet Pressure; Remote Management – The System Is Adapted For Communication With The Controlling Plc. The Size Of The Device Must Be In Accordance With The Typical Parameters Of Iso Containers. The Set Of Accessories Can Be Completed At The Place Of Use (E.G. Air Vents, Depressurization Chimneys) For The Purpose Of Transporting The Equipment. It Must Be Possible To Additionally Expand The Compression System To An Output Pressure Of At Least 700 Bar, At Most 900 Bar, And A Performance Of At Least 9 Kg H2/H. The Compression System Is Designed To Operate With H2 5.0 Without The Risk Of H2 Contamination For Use In Vehicle Fuel Cells. Detailed Technical Specification Of The Subject Of The Public Contract The Subject Of The Public Contract Is The Comprehensive Supply Of A Compression System For H2 Compression For The Development Environment Of H2 Technologies To The Headquarters Of Apt, Spol. S R.O., U Tesla 470/5, Hloubětín, 198 00 Prague 9. Device Requirements: Container Version For Installation In An External Environment. The Design Must Enable Autonomous Operation Of The Compression System. In Particular, They Include: Power Supply System; Operational Cooling; Control System – Frequency Converter, Controlled Valves; Safety System – Emergency Stop, Detection Of H2 Concentration In The Air, Emergency Ventilation, Maximum Temperature, Minimum H2 Inlet Pressure; Remote Management – The System Is Adapted For Communication With The Controlling Plc. Dimension In Accordance With Standardized Iso Container Parameters. The Set Of Accessories Can Be Completed At The Place Of Use (E.G. Air Vents, Depressurization Chimneys) For The Purpose Of Transporting The Equipment. Possibility Of Additional Expansion Of The Compression System To An Output Pressure Of At Least 700 Bar, At Most 900 Bar, And A Performance Of At Least 9 Kg H2/H. Compression System Designed To Operate With H2 5.0 Without The Risk Of H2 Contamination For Use In Fuel Cells Intended For Vehicles. Technical Requirements: Max Width 2,450 Mm Max Depth 3,050 Mm Max Height 3,000 (Without Accessories) Mm Max Weight 7,000 Kg Min Output 5 (At Inlet Pressure 50 Bar) Kg H2/H Min Inlet Pressure H2 30 Bar Min Output Pressure H2 500 Bar Inertization Of N2 Min Inlet Pressure N2 30-300 Bar Ambient Operating Temperature -20/+35 °C Max Power 55 Kw Electrical Connection 3X230/400 V Tn-C-S/50 Hz The Delivery Will Include Complete Technical Documentation, In Czech Or At Least In English, And Relevant Documentation To Protect The Legitimate Interests Of The User - Declaration Of Conformity (Formerly Declaration Of Conformity) In Accordance With Act No. 22/1997 Coll. On Technical Requirements For Products And On The Amendment And Addition Of Certain Laws, As Amended.
|
