Tenders Are Invited For Construction Of Bicycle Paths In The Oborniki Śląskie Commune in Poland

Work Detail

Execution Of Construction Works Based On The Land Development Design For The Task Titled: Renovation Of The Access Forest Road As Part Of The Task: Construction Of Bicycle Paths In The Oborniki Śląskie Commune On The Section From The Existing Flood Embankments To The Widawa River In Paniowice, Oborniki Śląskie Commune, Along An Existing Forest Road With A Dirt Surface. A Pedestrian Bridge Is Being Built On The Widawa River, Connecting The Oborniki Śląskie Commune With Wrocław, According To A Separate Study. The Renovation Project Includes Works Involving The Construction Of A Crushed Aggregate Surface Along The Entire Section. Construction Solutions Road Surface: - Wearing Layer Of Crushed Aggregate 0/8Mm, 3Cm Thick With A Mineral Stabilizer - Dynamic Layer Of Aggregate 0/16Mm, 5Cm Thick - Layer Of A Mixture Unbound With Aggregate 0/31.5Mm, 20Cm Thick - Medium-Grained Sand Embankment The Surface Structure Should Be Made In Accordance With Technical Specification D 05/01/04B - Construction Of A Mineral Surface Roadside Surface - A Layer Of Soil And Non-Aggregate Mixture C90/3 Gr 10Cm - Sand Leveling Layer - Variable Thickness Scope Of Works Earthworks And Demolition Works: - Earthworks Related To The Renovation Of A Forest Road - Demolition Of An Existing Culvert With Concrete End Walls Construction Of The Road Structure: - Laying A Layer Of Sand Embankment - Making A Foundation Of Mechanically Stabilized Stone Aggregate; - Vertical Road Markings - Construction Of A Culvert From 1000 Mm Pipes - Masonry Works In The Construction Of End Walls The Exact Scope Of The Task Should Be Performed In Accordance With The Attached: Project Technical Specification And Bill Of Quantities. Additional Information: The Contractor Will Be Obliged To Ensure Supervision Of The Road Industry; The Description Presented Above Is For Information Purposes Only. The Exact Scope Of The Subject Of The Order Is Determined By The Project, Technical Specification And Bill Of Quantities Attached To The Swz, Which Is An Auxiliary Material For Calculating The Lump-Sum Price Of The Offer. The Ordering Party Will Demand The Use Of Grade I Materials For The Execution Of The Order. The Contractor Will Be Obliged To Provide Documents Regarding The Materials Used To The Ordering Party Before Their Installation. All Works Must Be Performed In Accordance With Applicable Regulations And Standards. During The Performance Of The Works That Are The Subject Of The Order, The Contractor Is Obliged To Ensure Proper Order And Order In The Area Covered By The Works, As Well As Compliance With Occupational Health And Safety And Fire Protection Regulations. The Contractor Is Liable For Any Damage Resulting From The Execution Of The Order And As A Result Of Other Actions Of Persons Employed By The Contractor. The Final Acceptance Of The Subject Of The Order Must Be Accompanied By The Necessary Certificates And Will Take Place After The Delivery Of The As-Built Report, Including Photographic Documenta

Contact Information