|
Tender for Renovation Of Janakalyan Field At Ward No. - 19 (Booth No - 268) Under North Dum Dum Municipality.-- 1 Supply of 9 Mtr. Long GI Octagonal Pole including foundation and bolts [A / F - top (70 mm)], [A / F - bottom(155 mm)], sheet thick - 3 mm, base plate size - 260 mm x 260 mm, base plate thick - 16 mm, bolt numbers - 4- M24, bolt length - 750 mm, bolt PCD - 260 mm, (Make - Utkarsh / Calcutta Pole / Bajaj Pole / SHUBHAM Pole. 2 Erection of 9 mtr long Octagonal pole with suitable foundation and accessories.(As per drawing and specification). 3 Supply and fixing doble arm projected lamp bracket (single pipe bending) of 50 mm (2") dia GI pipe (ISI medium) of 2.5 mtr. Long each having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts, clamps etc. as required. 4 Earting with 15.88 mm dia 1.8 mtr. Long GI earth spike against each pole. 5 Supplying and delivery of 200 W LED flood light, new generation energy saving and environmental friendly lonhg life versatile pressure die cast aluminium housing IP66 and impact resistant of IK07,with high power LED. CHIP. Make - CREE / NICHIA / LUMILEDS / OSRAM / SEOUR, confirming to Technical specification and latest accreditation. LM - 79 and LM -80 report to be provided from any NABL accredited Lab. LED should be warrantee for 5 years. Make - Philips / Magik / Benlo. 6 Fixing only flood light, fitting with suitable tie clamps and MS plate for mounting on pole / tower or similar structure. 7 Supplying of 1.1 KV grade PVC insulated conductor of following unarmoured cables, (Make - Polycab / Gloster / Havells). 10 sqmm 4 core. 8 Laying only cable upto 50 sqmm through existing RCC / Hume / GI pipe / open masonary trench for single, 2, 3, 3.5 & 4 core. 9 Supply high density polythene pipe complete as necessary and as per direction of EIC. Confirming to IS 4984/1985, 6 Kg. / sqcm, 40 mm dia, 3 mm thick polythene pipe. 10 Supply and fixing medium gauge GI pipes (ISI medium) protection with necessary fitting and jointing materials as required, 40 mm dia GI pipe. 11 Supply, delivery and laying 3 core 1.5 sqmm flexible wireas per IS 694 (connection for pole to light fixture), Make - Incab / Gloster / Polycab / Havells. 12 S & F compression type blank complete with brass gland, brass ring and rubber ring for dust and moisture proof entry of XLPE / PVC armoured cable as below, for 4 core, 16 sqmm. 13 Finishing the end of following XLPE / PVC / Armoured cables 4 Core 10 sqmm by crimping method incl. Supply and solderless socket (Dowels make), anticorrosive pase and joining materials. 14 Supplying & Erection of mini size feeder piller box of size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable MS Angle. The PB have double hinge door at the front & back with suitable locking arrangement. The box will painted by 2 coates of aluinium paint over 1st coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion covred by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand and drawing & direction of EIC. 15 Supply and fixing 415 Volt TPN Fuse with sheet steel enclosure on flat iron frame on wall with nut bolts etc. incl. S & F 3 nos. DIN type HRC fuse, 32 Amp., Havells. 16 Supply & fixing of 240 / 230 Volt, 50 Hz, T. P. Power contractor, (make L & T / ABB / Schneider / Simence / GE)having contact block of the following range, 18 - 30 Amp., 1NO/1NC. 17 Supply and delivery of electronic driver suitable for 240 / 360 / 415 V, 50 Hz (Make - L & T / ABB . Schneider / Simence / GE / Minilic) of the following time (second)range3.0 to 30.0. 18 Supply and fixing Toggler switch (On - off - on). 19 Supply and fixing of 230 / 240 Volt, LED indicating lamp (Make - AE / KAPPA / IMP), blue / white colour. 20 Supply and fixing of terminal block. 21 S & F 240 Volt MCB of breaking capacity 10 KA and C characteristics on Din rail of existing DBs and necessary connection, Make - Havells, SP, 6- 32 Amp. 22 S & F 415 Volt MCB of breaking capacity 10 KA and C characteristics on Din rail of existing DBs and necessary connection, Make - Havells, FP, 32 Amp. 23 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 mtrs. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mtr. Long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers including S & F 15 mm dia GI pipe protection ( 1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs. below the ground level as as below : by ISI medium GI pipe.
|
