|
Tender For Repair Of Furniture At Af Stn Suratgarh; 2 Chair Dining:(FD-279) Taking out old unserviceable components as follows from Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- 3 Front legs 4 Rear legs 5 Front rails/ Side rails/ Back rails 6 Back rest 7 Stiffeners 8 New nylon buffers on legs. 9 Chair Easy:(FD-229) Taking out old unserviceable components as follows fromChair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- 10 Front legs 11 Rear legs 12 Side /Front / Back Rail 13 Arms 14 New nylon buffers on legs. 15 Chair Writing:(FD-280) Taking out old unserviceable components as follows from Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- 16 Front legs 17 Rear legs 18 Front / Side / Back rails 19 Back rest 20 Arms 21 Stiffeners 22 New nylon buffers on legs. 23 Material & Labourfor cutting of old plastic cane and re-canning of chairs of any type with half round plastic cane 2 mm wide 0.4mm thick for seat and back and border with 3mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by Engr-in-charge. 24 Chair Wooden Bottom:(FD-285) Taking out old unserviceable components as follows from Chair and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teakcomplete all as specified and shown on drawing and as directed by Engr-in-charge :- 25 Front legs 26 Rear legs 27 Side / Front /Back rails 28 Back rest 29 Stiffeners 30 Seat made of 6mm thick plywood commercial BWR grade. 31 New nylon buffers on legs. 32 Chair Dining JCO/ORs:(FD/MAP/II-05) Taking out old unserviceable components as follows from Chair Dining JCO/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge :- 33 Front legs 34 Rear legs 35 Front / Back / Side rails 36 Back rest 37 Stiffeners 38 PVC Seat 4mm thick with holes (as per sample kept in GE office) screwed with rails. 39 New nylon buffers on legs. 40 Chair Dining Officers:(FD/MAP/II-04) Taking out old unserviceable components as follows from Chair Dining Officers and supply & fixing New Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 41 New back rest 42 New vertical stripsof back rest 43 New back rail of back rest 44 New front legs 45 New rear legs 46 New stiffner 47 New rails 48 New stopper fixed with main frame and legs. 49 75mm thick 40 Density foam seat covered with coloured fabric as approved by GE. 50 New seat bottom of 12mm thick BWR Phenol bonded plywood . 51 New nylon buffers on legs. 52 Material & Labourfor two coats of French polish of best quality on old surfaces after preparation. complete all as specified as shown on drawing and as directed by Engr-in-charge for the following items of furniture :- 53 Chair Dining 54 Chair Easy 55 Chair Writing 56 Chair wooden bottom without arms 57 Chair Dining JCO/ORs 58 Chair Dining Officers 59 Sofa set Five/Four seater :(FD-281,373, FD/MAP/II-02) Taking out old unserviceable components as follows from Sofa set 5/4 seater and S& F new Components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 60 New Seat Rails Right and leftof Sofa set (Single Seater) 61 New Seat Rails Front and Back of Sofa set (Single Seater) 62 NewRails of back frame Top and bottom of Sofa set (Single Seater) 63 New Back and bottom support of Sofa set (Single Seater) 64 New long rails of seat front and back of Sofa set (Three Seater) 65 New long rails of Back frame Top and bottom of Sofa set (Three Seater) 66 New long Back and bottom support of Sofa set (Three Seater) 67 New legs of Sofa Single seater/Three seater 68 New Arms of Sofa set. 69 New bearers of Seat and Back rest of Sofa set. 70 Taking out old unserviceable foam cushion and S & F new cool foam cushion 32 Kg/cum density of size 580x560x100mm with superior quality tapestry cloth cover duly stiched at one end with openable zip & making good shape (Tapestry cloth not less than Rs.350/- per mtr as approved by GE). colour & pattern as approved by GE/Engr-in-Charge. 71 Material & Labourfor polishing of two coats of french polish for all exposed surfaces of the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed. 72 Material & Labourfor polishing of two coats of Melamin polish for all exposed surfaces of the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed. 73 do- but for Sofa set 4 seater. 74 Table Bed side:(FD/MAP/II-15) Taking out unserviceable components as follows from Table Bed side (MAP) and supply & fixing new components as per shape and size as existing made out of Ist class HardwoodPre laminated particle board teak face and commercial plywood of approved make all as specified and as directed by Engr-in-Charge. 75 New top with PVC/ TW edging . 76 New Bottom portion of upper and lower drawers. 77 New Front portion of upper drawers with PVC/ TW edging .. 78 New Front portion of lower drawers with PVC/ TW edging . 79 New Sides of upper drawers. 80 New Sides of lower drawers. 81 New Hard wood runner of upper and lower drawers. 82 New Hard wood stopper of upper and lower drawers. 83 New Frame work made of 18 mm MS square pipe (18 Gauge) powder coated with black colour enamel paint. 84 New 18mm prelaminated particle board inside the top frame work. 85 New Handle of upper and lower drawers. 86 New rubber Shoes for legs. 87 Table Dressing Ladies with Stool:(FD/MAP/II-07) Taking out old unserviceable components as follows from Table Dressing Ladies with Stool and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face all as specified and shown on drawing and as directed by Engr-in-Charge :- 88 New looking mirror. 89 New Frame and back support of the mirror including back side 6 mm thick commercial plywood. 90 New Top made of 18mm thick pre-laminated particle board teak faced and providing 4mm thick Teakwood beading on all exposed sides. 91 New drawers providing 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy. 92 New shutter of doors providing 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges. 93 50 mm Long "D" shaped Stainless Steel handle. 94 Magnetic catcher for shutters. 95 Side of stool providing 4mm thick Teakwood beading on all exposed sides. 96 Openable shutter made out of 12 mm thick commercial plywood fitted with MS folding Handle. 97 50 mm dia heavy duty revolving nylon wheel of stool. 98 75 mm thick foam cushion 40 densitycovered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than Rs.350/- per mtr) colour & pattern as approved by GE/Engr-in-Charge. 99 Material & Labourfor polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 100 Bin Linen Multipurpose: Taking out old unserviceable components as follows from Bin Linen Multipurpose and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face of make-Bhutan/Novopan/Archid all as specified and shown on drawing and as directed by Engr-in-Charge :- 101 New Top with 4mm thick Teakwood beading on all exposed sides. 102 New drawers with 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy. 103 New shutter with 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges. 104 50 mm Lomg "D" shaped Stainless Steel handle. 105 Magnetic catcher for shutters. 106 New partition of cupboard. 107 New 25X25 mm Hardwood stiffner 108 New Legs made of Hardwood. 109 Material & Labourfor polishing of two coats of French polish of best quality to the wooden/ plywood surfaces after preparation of old surfaces as specified and as directed. 110 Teapoy:(FD-278) Taking out old unserviceable components as follows from Teapoy and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 111 New Top made out of 18 mm thick pre-laminated particle board teak facedand providing Teakwood beading 4 mm thick all around the top 112 New Legs 113 New Long Rails 114 New Short Rails 115 Material & Labourfor polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 116 Table Peg: (FD-277)Taking out old unserviceable components as follows from Table Peg and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 117 New Top. 118 New Legs 119 New Long Rails 120 New Short Rails 121 Material & Labourfor polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 122 Table Writing: (FD-249 & 275) Taking out old unserviceable components as follows from Table Writing and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 123 New Top. 124 New Legs 125 New Top Rails 126 New Stiffners 127 New Drawers 128 New Shutter of cupboard providing CP Knobs and piyano hinges. 129 New 6 mm thick commercial plyon back of cupboards 130 Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 131 Table Centre: (FD-274) Taking out old unserviceable components as follows from Table Centre and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 132 New Top. 133 New Legs 134 New Long Rails/ Stiffner. 135 New Short Rails 136 Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 137 Table 900 mm x 600 mm without drawers:(FD-284) Taking out old unserviceable components as follows from Table 900 x 600 mm without drawers and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge. 138 New Top. 139 New legs 140 New Short Rail 141 New Long Rails 142 New Short Stiffners 143 New Long Stiffners 144 Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed. 145 Varandha chair: (FD-259) Material & Labourfor cutting of unserviceable plastic cane and re-caning of Chair Varandhawith half round plastic cane 4 mm wide, 0.5mm thick white colour for seat and back complete all as specified and as shown on drawing and as directed by Engr-in-charge. 146 Painting to frame of Chair varandha with white synthetic paint including preparationof surface after removing the old cane as specifiedand as directed by Engr-in-charge. 147 Almirah Large Steel with Shelves: (FD-1031) Taking out old unserviceable components as given below from Almirah large Steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. 148 New GI lock of suitable size with 4 levers with duplicate keys . Make of locks as approved by GE/ Engr in Charge. 149 New Locking device . 150 New steel Handle cromium plated 150 mm. 151 New Steel legs made out of 1 mm thick MS Sheet. 152 New Shelves made out of 1 mm thick MS Sheet.. 153 Fixing of shelves in existing position with appropriate size MS clamps as directed. 154 Repair of loose doors by replacing unserviceable existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified. 155 M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. 156 Almirah Medium Steel with Shelves: (FD-1032) Taking out old unserviceable components as given below from Almirah Medium Steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. 157 New GI locks suitable size with 4 levers with duplicate keys as per existing size and pattern. Make of locks as approved by GE/ Engr in Charge. 158 New Locking device as per existing type and as directed by Engineer in charge. 159 New steel Handle chromium plated 150 mm. 160 New Steel legs made out of 1 mm thick MS Sheet 161 New Shelves made out of 1 mm thick MS Sheet. 162 Fixing of shelves in existing position with appropriate size MS rivet as directed. 163 Repair of loose doors by replacing unserviceable existing hinges, fittings (Nut & Bolts, Steel Screw/Revits) and adjustment for smooth functioning as specified. 164 M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. 165 Charpoy Folding: (FD-388(R)) M&L for taking out old unserviceable components as given below from Charpoy Folding and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge. 166 New top made out of ply wood BWR commercial 12 mm thick of approved make size as existing in two piece including fixing to frmae with 08 Nos flat head nut and bolts 167 New side legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats. 168 New middle legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats. 169 New Stiffner made of 25 dia 16 gauge MS conduit pipe. 170 Removing the unserviceable rubber shoes and supply & fixing of new rubber/ PVC shoes of best quality 171 M&L for electric arc welding of broken joints of Charpoy folding wherever necessary. 172 Painting on entire frame of Charpoy folding after preparing the surface after removing rust, old paint, dirt etc. with OG colour enamel paint . 173 Locker Bedside Steel: (FD-257 & 1029) Taking out old unserviceable components as given below from Locker Bedside Steel and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 174 New steel Bow handle chromium plated 100 mm Heavy duty. 175 New Steel hanging Rod 20 mm dia CP conduit pipe of wall thickness 1.25 mm 176 New Steel sockets 25 mm dia chromium plated with fixing steel screw. 177 Repair of loose doors by replacing unserviceable existing hinges, fittings and adjustment for smooth functioning as specified. 178 New MS hasp & staple 75 mm fixed with rivets to the shutters as specified. 179 New Steel Tower bolt 75 mm welded to the shutter as specified. 180 New Steel legs made out of 1 mm thick MS Sheet. 181 M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. 182 Book Case Steel: (FD-1028) Taking out old unserviceable components as given below from Book Case Steel and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 183 New GI locks 4 levers with duplicate keys. Make of locks as approved by GE/ Engr in Charge. 184 New steel bow Handle Chromium plated 100 mm. 185 New glass pane 3 mm thick Make-Modigurd/ Saint Gobin 186 Fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving. 187 M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. 188 Charpoy MS Tube: Taking out old unserviceable components as given below from Charpoy MS Tube and S & F New Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 189 New 12mm thick BWR phenol bonded commercial ply of size 1980 mm x 900 mm. 190 New 18mm both side prelaminated particle board of headboard screwed to MS strip. 191 New rubber shoes of best quality. 192 M&L for electric arc welding of broken joints of Charpoy MS Tube wherever necessary. 193 Painting on entire metal portion of Charpoy MS Tube after preparing the surface after removing rust, old paint, dirt etc. with black colour enamel paint as per drawing and as directed by Engineer-in-Charge. 194 Table Dinning ORs: (FD-165) Taking out old unserviceable components as given below from Table Dinning ORs and S & F New Components in replacement as per Shape and size as exiisting. All Steel parts of 25 mm square tube 1.6 mm wall thickness.Rest all as specified and shown on drawing and as directed by Engr-in-Charge. 195 New legs. 196 New top long rails/ Stiffner. 197 New Hard rubber shoes for legs. 198 M & L painting to the frame with one coat of synthetic enamelpaint after preparation of steel surface. 199 New top made out of 18 mm thick block board covered on top with 22 guage aluminium sheet, and fixed to frame with steel screw of appropriate size. 200 Table Office Clerk Steel : (FD-381 & 1004) Taking out old unserviceable components as given below from Table Office Clerk Steel and S & F New Components in replacement as per Shape and size as existing. All Steel parts made out of 25 mm square tube 1.6 mm wall thickness. Rest all as specified and shown on drawing and as directed by Engr-in-Charge :- 201 New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novopan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. 202 New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. 203 New legs/ Stiffner. 204 New top rails. 205 New drawer inluding MS channel made out of 1.0 mm thick PBI sheet . 206 New hard rubber shoes for legs. 207 M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified. 208 Table Office Offrs Steel: (FD-84 & 1003) Taking out old unserviceable components as given below from Table Offrs steel and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 209 New top made of 18 mm thick pre-laminated particle board teak faceduly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. Make-Bhutan board/ Novapan/Archid 210 New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. 211 New legs/ Stiffner. 212 New top rails. 213 New Hard rubber shoes for legs. 214 New drawer inluding MS channel made out of 1.0 mm thick PBI sheet as per drg. 215 M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified. 216 Table Steel 900 x 600 x 760mm with drawer: (FD-1008) Taking out old unserviceable components as given below from TableSteel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 217 New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. Make-Bhutan board/ Novapan/Archid. 218 New GI lock 4 lever with 2 keys. Make of locks as approved by GE/ Engr in Charge. 219 New legs made out of 25 mm square tube 1.6 mm wall thickness. 220 New drawer inluding MS channel made out of 1.0 mm thick PBI sheet as per drg. 221 New hard rubber shoes for legs. 222 M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified. 223 Table Steel 900 x 900 x 760mm: (FD-1009) Taking out old unserviceable components as given below from TableSteel 900 x 900 x 760mm and S & F New Components in replacement as per Shape and size as existing. All Steel parts made out of 25 mm square tube 1.6 mm wall thickness.Rest all as specified and shown on drawing and as directed by Engr-in-Charge 224 New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick TW beading alround the top duly polished with two coats of french polish. 225 New legs/top rails/ Stiffners. 226 New hard rubber shoes for legs. 227 M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified. 228 Chair CB Steel with Arms: (FD-75(M)) Taking out old unserviceable components as given below from Chair CB Steel with Arms and S & F New components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 229 New MS cleats of size 50 x 25 x 3 mm and welding of joints and cracks to frame. 230 Removing of existing paint by scraping with abrasive cloth and painting one coat with synthetic enamel paint OG on steel surfaces after preparation of surfaces complete all as specified shown in drawing or as directed by Engr-in-Charge. 231 New seat frame made out of well seasoned 1st class hard wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. 232 New Back frame made out ofwell seasoned 1st class teak wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. 233 New PVC cap 234 New hard rubber shoes. 235 New arms of well seasoned 1st class hard wood and applying two coats of French polish black . 236 Chair CB Steel without Arms: (FD-75(M)) Taking out old unserviceable components as given below from Chair CB Steel without Arms and S & F New components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 237 New MS cleats of size 50 x 25 x 3 mm and welding of joints and cracks to frame. 238 Removing of existing paint by scraping with abrasive cloth and painting one coat with synthetic enamel paint OG on steel surfaces after preparation of surfaces complete all as specified shown in drawing or as directed by Engr-in-Charge. 239 New seat frame made out of well seasoned 1st class hard wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. 240 New Back frame made out ofwell seasoned 1st class teak wood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5 mm thick. 241 New PVC cap 242 New hard rubber shoes. 243 Chair Varandha: (FD-359 & FD/MAP-II/06) Taking out old unserviceable components of Chair Varandha and S & F New Components in replacement as per Shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- 244 New PVC seat and back ( both included)4 mm thick (having weight not less than 1.85 kg) having grooves 90X10 mm 10 Nos on seat and back. 245 welding of broken joints on frame. 246 New Hard rubber shoes for legs. 247 Painting the entire frame with two coat of synthetic enamel white paint after preparation of steel surface removing rust, dirt etc. 248 Chair Easy Steel: (FD-121(M)) Taking out old unserviceable components of Chair Easy Steel and S & F New Components in replacement as per Shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- 249 New legs/stiffners made out of 19 mm square steel pipe of 16 gauge and gas welding to the frame. 250 New seat made of polyurethene form covered with rexin as per drawing and as directed. 251 New Back made of polyurethene form covered with rexin as per drawing and as directed. 252 New Arms made out of 1st class HW shisham fixed on steel frame with steel screws as per drawing. 253 New Hard rubber shoes for legs. 254 M & L for welding to the entire frame and painting to the frame with one coat of synthetic enamel black paint after preparation of steel surface. 255 Chair School with Hand Board: (FD/E6/MAP/05) Taking out old unserviceable components of Chair school with Hand Board and S & F New Components in replacement as per Shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- 256 New One piece PVC seat and back of Chair School with HB fixed to frame with steel screw. 257 New Hand Board of 18 mm thick Prelaminated particle board with TW/ PVC beading screwd to 25 mm dia hollow steel pipe as per drawing and as directed by Engineer in Charge 258 M& L for welding of broken joints on frame. 259 New Hard rubber shoes for legs. 260 M & L for painting entire frame with one coat of synthetic enamel black paint after preparation of steel surface. 261 Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents.
|
