|
Tender For Completion Of Incomplete Work Of Provision Of Gymnasiums (Cl Ii) At Grrc, Lansdowne.; 1 M&L for 100 mm thick PCC (1:4:8) type D2, (Using 40 mm graded stone agg) as in sub base/sub base of floorcomplete all as specified and directed. 2 M&L for moorum / red bajri filling in, floor or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. 3 M&L for modular brick work with FLYASH bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. 4 M&L for brick work with SUB CLASS B old sizebricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 5 M&L for brick work with SUB CLASS B old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. 6 M&L for 20 mm thick granite slab as approved by the GE (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. 7 M&L for 10 mm thick plastering on fair faces of bricksurface in CM (1:4) surface finished even and fair complete all as specified and directed. 8 M&L for 20 mm thick granite slab as approved by the GE (table rubbed and polished) inwall lining (Veneering to wall) in12 mm thickin CM (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 9 M&L for 10 mm thick plastering on fair faces of bricksurface in CM (1:6) surface finished even and fair complete all as specified and directed. 10 M&L for preparation of new plastered surfaces of walland chalk whitening and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specificationover a coat of primer of approved make complete all as specified. 11 M&L Providing Granite slab edge moulding to 20mm thick stone of counters vanities ,cooking plateform,step etc.including machine polishing to edge to give high gloss finish etc. complete all as specified. 12 Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. 13 M&L for PCC (1:4:8) Type D2 (Using 40 mm gradedstone aggre-gate) 200 mm thickas in floor/paving complete all as specified and directed. 14 M & L 20 to 25mm thick Kota Stone (Mirror Polished) with marble strip all as specified and as directed over 20mm thick screed bed in CM 1:6 complete all as specified and directed. 15 M & L 20 to 25 mm thick Kota Stone (Mirror Polished) 100 mmwidth as in skirting over 10 mm thick cement mortar 1:4complete all as specified and directed. 16 S & F Rubber tile for floor thickness not less than 25 mm thick(tough rubber flooring made upto 40% black recycled rubber & 20% colour EPDM(Ethlyene propylene-Diene-monomer rubber granules & adhesive with V-groove,interlocking & paper cut as directed by EIC plane rubber matting shall have a checker plat surface pattern & a flat revers side. The non directional checker plat patterns gives this matting a non slip surface that is still easy to mop/clean of desired colour.Adhesive -SR 505 or SR 998 as per manufacturers instruction or styrene butadiene copolymer (SBX) latex synthetic rubber adhesive. complete all as specified and as directed. 17 S & F Rubber tile for wall cladding not less than 15 mm thick(tough rubber made upto 40% black recycled rubber & 20% colour EPDM(Ethlyene propylene-Diene-monomer rubber granules & adhesive with V-groove,interlocking & paper cut as directed by EIC plane rubber matting shall have a checker plat surface pattern & a flat revers side. The non directional checker plat patterns gives this matting a non slip surface that is still easy to mop/clean of desired colour.Adhesive -SR 505 or SR 998 as per manufacturers instruction or styrene butadiene copolymer (SBX) latex synthetic rubber adhesive. complete all as specified and as directed. 18 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed inany mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 19 M&L for granitetiles 20mm thick machine cut as approved by GE, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20 mm thick screed bed (1:6) complete all as specified and as directed. 20 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. 21 M&L for 20mm thick Granitetiles machine cut as approved by GE, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10 mm thich rendering (1:4) complete 22 M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed. 23 M&L for PCC (1:3:6) type C-1, using 20 mm graded stone aggregate as in surface channel and drainetc complete all as specified and directed. 24 M&L for extra for forming fair finished drain, or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed. 25 Mirror polishing on marble/ granite/Kota stone/ stone work where everrequired to give high gloss finishcomplete all as specified and directed. 26 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation or for shafts, well cesspits, manholes etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed. 27 M&L for PCC (1:4:8 Type D2 (using 40 mm graded stone aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed. 28 M&L for 15mm thick plastering on brick or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed. 29 M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 30 M&L for 100 mm thick PCC (1:2:4) type B2, (using 40 mm graded stone agg) as in sub base of floor complete all as specified and directed. 31 M&L for preparation of newly plastered surface of external wall all as prescribed by manufacturer of paint and applying two coats of exterior anti fungal acrylic emulsion paint of make as approved by GEover one coat of primer complete all as directed. 32 M&L forstainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement complete all as specified and directed. 33 M&L Plain, Aluminiumsheeting,Alloy 31000 H4in ridges, hips, valleygutter, drip and straightflashing (length andgirth as fixed) with powder coating of any colour (thickness of powder coating not less than 50 micron complete all as specified and directed. 34 M&L for pre-formed filler board 25 mm thick for crumple joints complete all as specified and directed. 35 M&L for mild steel screw bolts (machine made) dia of neck length 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, nexc 5cm long complete all as specified and directed. 36 M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over 15 mm thick cement screedbed (1:4) complete all as specified and directed. 37 S& F 1.25 mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;gear operated type with bevel gear box and crank handle erected in position as indicated including MS Spring for rolling shutter, size of spring 300mm long inner dia not less than 65mm and MS wire 6mm dia complete all as specified and as directed. 38 Supply only Ball bearing for rolling shutters complete all as specified and directed. 39 M&L for twocoats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. 40 M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or PCC (1:2:4) type B1 to match with existing surfaceof following superficial area complete all as specified and as directed :- 41 Superficial area exc 150 sqcm but not exc 400 sqcm 42 M&L bands, straps, supports or stays for rainwater (stack clamp), ventilating pipes, including bolts, if required, hooks (stays), heavy for large gates, hooks and pintle hinges large hasps and staples, hand made sliding bolts, clamps, hold fasts, wall ties, hooksforhanging fans plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts two way and three ways straps, plate washers and similar articles conforming to Fe-290(Gde-E-165) complete all as specified and directed. 43 S&F Powder Coated ofcolour as approved by GE/AGE(I)(minimum thickness of powder coating 50 micron), aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 44 S&F Powder coated ofcolour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified and directed. 45 S&F Powder coated ofcolour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 46 S&F Powder coated of colour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 47 S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden/ PVC/ aluminium beading, in square n. exc 0.5 sqm in each pane complete all as specified and as directed. 48 S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden or aluminium or PVC beads in square in each pane of following size complete all as specified and as directed :- 49 Exc 0.5 sqm in each pane 50 S&F 2nd class hardwood ( sal ) Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 51 S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified. 52 S&F extruded aluminium alloy handles, fabricated type, anodised (ISI marked) of following size complete all as directed and specified:- 53 150 mm long 54 S&F anodised aluminium barrel tower bolts (ISI marked) of extruded section of following size complete all as directed and specified:- 55 150 mm long 56 S&F anodised aluminium sliding door bolt (ISI marked) with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of following size complete all as specified and directed:- 57 300mm long 58 S&F floor doorstopper (ISI Marked) of aluminium alloy body andtongue anodised, with hard drawn steel spring, fixed in floor of following size complete all as specified and directed :- 59 140mm long (overall length of cover plate) 60 S&F MS butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed:- 61 100 mm long 62 M&L for twocoats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed. 63 S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed. 64 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. 65 S&F 125 mm long anodised aluminium barrel tower bolts (ISI marked) of extruded sectioncomplete all as directed and specified 66 S&F vitreous china urinal half stall type urinal white complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe and urinal spreader complete all as specified and directed. 67 S&F 5mm thick bevelled edge best quality looking mirror of size 600x450 mm with 30mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 6mm thick AC bldg board, complete all as specified and directed. 68 S & Fvitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed . 69 S&FPVC valveless, syphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. 70 S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., completeall as specified and directed. 71 S&Ftoilet paper holder of brass, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. 72 S&F Liquid soap container of PTMT fixed withand including Chromium plated brassscrews and wooden/plastic cleats. (Minimum weight 105gms) completeall as specified and directed. 73 S&F towel rail 600mm long of PTMT fixed with and including CP brass screws and wooden cleats having min weight 190 gms complete all as specified and directed. 74 S&F rotational moulded polyethylene water storage tank, white in colour triple layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia Ball valves highpressure of PTMTwithepoxy coatedAluminiumrod&highdensity plastic ballscrewed for iron pipeand fixed.(Minimumweight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms),20 mm GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank completeall as specified and as directed:- 75 Capacity 1000 Ltrs 76 S&Fof hat pegs, aluminium solid body, 125mm to 175 mm complete all as specified and directed. 77 Returning, filling in ,soft/ disintegrated rock including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. 78 Removal of excavated materialto a distance nexc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 79 Removal of surplus soft/disintegrated rocks to a distance nexc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 80 Removal of surplus soil to a distance exc. 250 Mtr nexc. 500 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 81 Spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as spd 82 M&L concrete bed to drain pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mmbore sewer pipe line complete all as specified and directed. 83 M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed withWPC (liquid type) as per manufacturer instruction complete all as specified and directed.Note :- WPC (Liquid type) shall be measured and paid separately as supply only. 84 Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed. 85 M&L for precast RCC (1:2:4) type B1, (using 20mm graded stone aggregates) as in cover slab (for manholes) and set in CM (1:4) including necessary fair finish formwork complete all as specified and directed. 86 M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 87 S&F cast iron (Spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor for following bore of pipes complete all as specified and directed:- 88 100mm bore (spun pipe) 89 M & L for PCC type C2 (1:3:6) (using 40mm graded stone agg ) as in surface channel or drain or benching in manhole complete incl. necessary form work all as specified and directed. 90 S& F powder coated mild steel Personel locker unit of size 1140x450x380mm of size and thickness of 0.8mm including lebel holder,HDPE plastic handle, and 04 Nos levelling screws/stands with complete all as specified and directed. 91 S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. 92 S & F Brass knobs 35-40mm dia complete specified and directed. 93 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves complete all as specified and directed. 94 M&L Formwork to edges of concreteflats, treads, breaks in floors,window cills, concrete rail ings, openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similarwork exc 10cm but n exc 20cm widecomplete all as specified and directed. 95 M&L for formworkfor rough finish to soffits of suspended slabs such as roof slabs, floor slabs, landing slab and similar work, not exceeding 200mm thick complete all as specified and directed. 96 M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. 97 M&L for 19 mm thick prelaminated particle board, interior grade, ISI marked, pre laminated one side with decorative choice lamination and other side balancing white laminationsuitable fixed with screws to timber frame workcomplete all as specified and as directed. 98 M&L for 10 mm thick plastering on other than fair faces of bricksurface in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed. 99 S&F continuous (piano) brass hinges, width of flaps (when open) 30mm complete all as specified and directed. 100 S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screwscomplete all as specified and directed. . 101 M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying one coat of oil emulsion distemper complete all as specified and as directed. 102 M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying one coat of plastic emulsion distemper complete all as specified and as directed. 103 M&L for preparing newly plastered surfaces of wall and applying/ finishing walls with Acrylic Smooth exterior paint of required shade with Twocoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer instruction complete all as specified and directed. 104 S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 105 S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and as directed. 106 S & F Aluminium section frame work in ACP Cladding complete all as specified and as directed 107 S&F rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-Acomplete all as specified and as directed.Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. 108 S & F Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 109 Erection Fixing only (Retrieved Material will be reused) of roof trusses (framed), trussed, purlins, and fastenings and heavy framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Note : Erection fixing with old section and making the surface smooth as per its original 110 Erection Fixing only (Retrieved Material will be reused) Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. Note : Erection fixing with old section and making the surface smooth as per its original 111 M & L preperation of old steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified 112 S & Fin Repair of20-22mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square exc 30cm long etc complete all as specified anddirected. 113 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed. 114 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in Chajjas complete all as specified and directed. 115 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in floor/ roof beam, cantilevers, lintel over 1.5m span complete all as specified and directed. 116 M&L for formwork for rough finish to sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified and directed. 117 M&L for formwork for rough finish to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 118 M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. 119 M&L for mild steel TMT bars 5 to 10mm dia bars as in stirrups cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 120 M & L for preperation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as specified and directed. 121 M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane as per manufacturer’s instructionswith following course of description below :- (a)Applying a priming coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, till the surface is properly impregnated.(b) Providing APP based 5 layer polymeric membrane minimum weighing 3 .0Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturers instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer(c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membranceNote : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessibleroof slab for double storeyed.The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.) 122 S & F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 123 M & L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 124 Fixing for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid seperately) complete all as specifiedNote : Board obtained from dismantling are 60% reused 125 Aluminium panel (Total 4 mm) shall be composed of non combustible polyethylene core (3 mm) laminated and sandwitched between two fine aluminium sheets (0.5mm). The external aluminium surface shall be coated with superior quality PVDF resin coating (22 to 28 micron) to ensure durability, stability, corrosion and weather resistance. The inside aluminium surface shall be polyster coated ensuring smooth surface as per manufaturers instruction, using 2 x 1plain rectangular tube. Depending upon site condition and as approved by GE colour will be selected, 3M Adhesive tape, weathering sealent and quality hardware.Panel of 1220mm x 3660mm and 1220 x 3050mm Frame work shall be made, matching to the elevation and rigidly fixed to the building by means 3M tape. all the joints of the ACP sheet shall be finished with weatherproofing DOWCORNING 789 sealant as per manufaturers instructions. 126 M & L for Non skid white ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed 127 S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- 128 15mm bore 129 20mm bore 130 25mm bore 131 50mm bore 132 S&F stop valve, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed:- 133 15mm bore 134 20mm bore 135 S&F 15 mm bore bib taps, cast copper alloy CP with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 136 S&Fshower rose 125 mm size chromium plated with or without swivel joints, any size, including fixing to15mm GI pipe or union complete all as specified and directed. 137 S&F15 mm bore hot & coldbasin mixer, cast copperalloy, with capstan heads, chromium plated, Fancy type screwed down for pipe,high pressure, screwed for iron pipe complete all as specified and directed. 138 S&F PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed :- 139 450mm 140 S&F gun metal globe or gate valves, (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- 141 15 mm Bore 142 25 mm Bore 143 50 mm Bore 144 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil comlete all as specified and directed. 145 Excavating over areas, n exc 1.5m deep and gettingout in soft/ loose soil complete all as specified and directed. 146 Excavating over areas, in following depth and gettingout in soft/ disintegrated rock complete all as specified and directed :- 147 Depth not exc 1.5m deep 148 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 149 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation or for shafts, well cesspits, manholes etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. 150 M & L for cement concrete work in pavement/hard-standing of flexural strength 40kg/ per square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less complete all as specified and directed. 151 M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and directed. 152 M&L for spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. 153 M&L for continuous brick edging; with burnt clay bricks of sub class B with width equal to the depth of the brick; laid dry on end vertically in groundincl all earth work complete all as specified and directed. 154 M&L for 75 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of hardstanding/ footpath complete all as specified and directed. 155 M & L for 80 mm thick rubber moulded machine pressed precast concrete interlocking paver block with grey cement & no pigment any shape and size confirming to IS-15658-2006 of M-40 Grade as in floor etc, complete all as specified and directed. 156 M&L concrete bed to drain pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mmbore sewer pipe line complete all as specified and directed. 157 S & F of 150 mm bore reinforced concrete pipe class NP3 laid, jointed with collar with and including one coller for each length of pipe complete all as specified and directed. 158 M & L for brickwork with fly ash bricks, straight or curved on plan exc. 6.00 m mean radius, built in cement mortar 1:6 complete all as specified and directed. 159 M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. 160 M & L for 15 mm thick rendering in cement mortar 1: 4 using WPC @ 3 % by weight of cement on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. (NOTE: - WPC shall be measured and paid separately under respective item as Supply only.) 161 M & L for 15 mm thick rendering on other than fair faces of brick work or stone masonry surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed. 162 Supply only WPC integral water proofing compound complete all as specified and directed. 163 Construction of 50 users septic tanks including excavation in soft/loose soil, PCC 1:2:4 in foundation, brick work in CM 1:4, RCC M-30 slab cover including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforcement cover with angle iron frame vent shaft and sludge chambers etc. complete all as specified and directed, (Ref TD-217 Sh 1/7 to 7/7). 164 Construction of soakage well 1.2m dia and 3.0m deep, excavation and earth work in soft/loose soil, PCC (1:3:6) using 40 mm graded stone aggregate in foundation, honey comb brick work in CM (1:4), RCC M-25 as in slab, complete all as specified and directed (Ref TD-309 Sh 1/4 to 4/4). 165 M&L for PCC (1:3:6) type C1 (Using 20 mm graded stone aggregate) as in coping, roof kerb, cill, bed block, block for insertion of hold fast of door and window with and including formwork complete all as specified and directed. 166 M & L for 10 mm thick rendering in cement mortar 1:4 on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 167 M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 168 M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, stone masonary work built in CM (1:6) complete all as specified and as directed. Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. 169 M&L for Precast PCC (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in bond stones in lieu of stone bond stones, set in cement mortar (1:6), complete all as specified and directed. 170 M&L for stone boulder or broken stone hand packing (Any thickness)at back of wall over arches etc and raising (or lowering) to the required level, complete all as specified and as directed. 171 M&L for raised pointing in cement mortar (1:4) to random rubble masonary uncoursed or brought upto course complete all as specified and directed. 172 Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complet all as specified and directed. 173 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of following size complete all as specified and as directed :- 174 110 mm bore 175 M & L for concrete bed in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in bedding for drain pipes including packing under and completely surrounding pipes with concrete after they are laid & tested in for 110 mm bore pipe complete all as specified and directed. 176 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to wall of following size complete all as specified and as directed :- 177 110 mm bore 178 Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. 179 M&L for RCC (design mix) M-25 (20mm graded aggregates) as in walls, retaining wall, basement wall etc.complete all as specified and directed. 180 M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 181 M & L for black bituminous paint to surfaces of any description wood, steel, Iron, concrete, brick, stone etc., exceeding 10 cm in width or girth complete all as specified and directed. 182 M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. 183 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 184 Dismantling structural steel work including doors, gates, ladder and framed work of watch tower etc complete all as specified and directed. 185 Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed. 186 Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground levelincluding removal of rubbish out side MOD land complete all as specified and directed. 187 Demolition of RCC n exc 15cm thick (below or above grong level) including cutting of reinforcement to facilitate demolition complete all as specified and directed. Note : Reinforcement obtained from demolition will be considered credit Sch as scrap iron. 188 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- 189 Area not exc 1.5 sqm each 190 Area exc 1.5 sqm but not exc 4 sqm each 191 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 192 Dismantling of wall and ceilingboards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. 193 Demolition of reinforced cement concretein Valley Gutter,Column etc andremoving unserviceable material out side cantt area complete all as specified and directed.. 194 Dismantling of ACP Sheet complete all as specified and as directed. 195 S&F connecting & testing distribution board of sheet metal enclosures double door, IP-43, 240V, for using MCBs / MCB isolators with having tinted copper bus bars suitable for 200 Amps ratinghaving following capacity complete all as specifiedanddirected 196 DB SPN, 12 way 197 DB SPN, 8 way 198 S&F MCB single pole with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 6 to 32 Amps current rating , B Series, 10 KA complete all as specifed and directed. 199 S&F MCB Single pole and Neutral with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 6 to 32 Amps current rating , C Series, 10 KA complete all as specifed and directed. 200 S&F MCCB three pole and Neutral with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, fix type suitable for three phase circuit of 430 volts of current rating 63/100 Amps, C Series, 16 KA breaking capacity suitable for TPN DB 4/6/8/12 way complete all as specifed and directed. 201 S&F LED fitting 18/20 Watt, 230V,1200 mm long, Surface mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 202 Dismantling / taking down and S&F LED 2x2 feet squarefitting 2x18 Watt, 230V,false ceiling mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 203 Supply & Fixing Lamp holder/Batten holder with PVC/Polycarbonate body angular/straight fixed on plastic laminated sheet cover round shape 3 mm thick including 01 No LED 10 W suitable for 230 V complete all as specified and directed. 204 S&F Exhaust fan 250 mm sweep PVC bodywith louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed. 205 S&F heavy duty Exhaust fan 450 mm sweep metal body, double ball bearing with louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed. (Note:- Exhaust fan to be connected by submain wiring 1.5 sqmm catered in separate item of the schedule). complete all as specified and directed. 206 S&F LED linear mirror light Aesthetically designed, Provided with a high output PMMA diffuser for glare free light 7 watt. Dimension: 300 mm. incl lamp etc. complete with all accessories in and including connecting up with twin core twisted flexible copper conductor cable with suitable size copper wire complete all as specified and directed. 207 M&L Sub main wiring with 2 single core 1.5 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 1x1.0 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 1.5 sqmm & one run of 1.0 sqmm copper cablemeasured as one unit.Note:- Two light points will be controlled by one way switch 5 Amp in false ceiling of 7 mtr height in hall. 208 M&L Sub main wiring with 2 single core 4 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 2.5 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 4.0 sqmm & one run of 2.5 sqmm copper cablemeasured as one unit.complete all as specified and directed. 209 Sub main wiring with 2 single core 6 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 4 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 6.0 sqmm & one run of 4.0 sqmm copper cablemeasured as one unit. 210 Supply & fix LED street light 48 watt made up of pressure die cast aluminium housing with toughned glass and individual high power LEDs with secondary optics with IP 66 protection, impact resistance of IK07 & 10 KV external SPDincluding cost of GI pipe, bracket, clamps, nut & bolts etc required for fixing of fittings complete all as specified and directed. 211 S&F blanking plate complete all as specifed and directed. 212 M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground levelat any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4mm GI Wirecheck nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 15 mm dia medium grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. 213 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete. 214 Fixing only LED 2x2 feet squarefitting 2x18 Watt, 230V,false ceiling mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 215 Dismantling and taking down u/s sub-main wiring/service wire of any size including wooden batten / PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & as directed. 216 S & F switch Modular single pole,one way 6 Amps , 1 module,230 volts, 50 hzcomplete all as specified and directed. 217 S&F ceiling rose 65 mm 3 terminal / PVC/ polycarbonate, isolated body complete all as speccified and directed 218 M&L for sand cushioning with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified and directed.Note:- Punned thickness shall be considered for payment purpose. 219 Supply and laying cable protection bricks, common burnt clay sub class B designation 75 for protection of UG cable laid in trenches with axis of the bricks perpendicular to the axis of the cable complete all as specified and directed. 220 Supply laying, testing and commissioning of 1100 volts grade XLPE insulated PVC sheathed steel armoured alluminium stranded conductor LT UG cable (conforming to IS 1554) in trenches /ducts /through RCC pipes under roads of size 4 core 25 sqmm complete all as specified and directed.
|
