|
Tender For Special Repair Of Building No P48 Qtr No P48 1 To P48 12 At Old Red Colony At Nams.; 1 Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n.exc 1.50 sqm each complete all as specified and directed. 2 Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each complete all as specified and directed. 3 Supply and fixing of mild steel framed work just as doors, ventilators, and as inhold fast, ladders, Framed Guard bar etc with ends of bars shouldered and/or riveted complete welded hinged and similar work Conforming to Fe-290 Gde-E-165 including PCC 1:2:4 filling for hold fast and back filling in chowkat etc complete all as specified and directed. 4 Material and labour for 30 mm thick factory made solid PVC (Wood plastic composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with 15 x 15 Square tubes in is rails with screwing 8 x 28 mm heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufactures instructions complete all as specified and directed. 5 Material and labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless steel butt hinges shall be paid separately. 6 Material and labour for Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. 7 All as per item No 6 above but of frame size 65 x 125 mm including all fittings making good after complete all as speicifed and directed. 8 Supply and fix anodised aluminium powder coated any colour minimum coating 50 micron three track windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame and shutter of fixing with handles, tower bolts, rubber gasket and maruti lock, and making good to disturbed surface with cement concrete 1:2:4 and cement mortar 1:4 complete all as specified and directed.Note :-sheet glass, wire cloth, etc shall be measured and paid seperately. 9 Supply and fix anodised aluminium powder coated threee coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.), hinges type B-21 100mm long (2 nos.) suitable handle (1 no.), rollers etc. complete all as specified and directed. 10 Supply and fix 5 mm thick, black tinted glass panes with nano coatingfixed to aluminium doors/windows/vents with necessary rubber gaskets duly with complete all as specified and directed. 11 Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed. 12 Supply and fixing of floor door stopper of aluminium alloy body and tongued,anodised,with hard drawn steel spring,fixed 140mm min length complete all as specified and directed. 13 Supply and fixing of 150mm aluminum handles, cast type, anodised etc complete all as specified and directed. 14 Supply and fixing of 200 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed. 15 Supply and fixing of 150 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed. 16 Supply and fixing of Stainless Steel butt hinges 100 mm size medium weight cold rolled mild steel(zinc chromate coating) complete all as specified and directed. 17 Supply and fixing of 250mm sliding door bolts aluminium alloy anodised, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed. 18 Supply and fix mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. 19 Material and labour for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth over one coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete all as specified and directed. 20 Supply and fixin repair, 20 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. 21 Supply and fixing of in repair 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed all as specified and directed. 22 Supplying and fixing in repairs PVC valve less syphonic action type low level flushingcistern of 10 ltrs capacity with inlet ball valve, float valve, handle typeincluding32mm dia of PVC(Heavy duty) flush pipeincludingbracketscomplete all as specified and directed. 23 Supply and fxing in replacement of rotational moulded polythene water storage tank, white coloured,tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections,20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm longwash outwith plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts (including old water storage tank) complete all as specified and directed.(including dismantaling of old water storage tank) 24 Supply and fix in repair, glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. Make : Cera/Jaqaur/Parryware or equivalent. 25 Supply and fixing of in repair glossy finish towel rail,20mm dia,D-type 60 cm long between flanges all as specified and directed. 26 Demolition of brick work built in cement mortar complete all as specified and directed. 27 Material and labour for brick work using sub class ‘B’ old size bricks, straight or curved on plan exc. 6 mean radius in CM 1:6 complete all as spcified and directed. 28 All as per Srl Item 27 above but except brick. 29 Supply and fixing of in repair600mm x 450mm beveled edge mirror of the selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. 30 Supply & fix in repair, Viterous China wash down water closet pan (pedestal pattern) coloured including"P" or "S" trap with flush pipe of chromium plated brass 32 mm dia for low levelflushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device complete all as specified and directed. 31 Supply and fixing in repair vitreous china wash hand basin(white) wall hung corner typeof size 400 x 400 mm including bracket, CP waste coupling 32mm, waste pipe, chain,plugand porcelein stopper complete all as specified and directed. 32 Supply and fixing of sink in repair made of stainless steel 1mm thick with plug washer and waste coupling, waste pipe including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowel size 410mm x 330mm x 160mm, complete all as specified and directed. 33 Supply and fixing of in repair stainless steel plate Rack ofsize 750x750x250mm weight not less than 7.5 kg with folded edge gloss finish completeall as specified and directed. 34 Taking down G.I tubing 15mm bore includingconnections complete all as specified and directed. 35 All as per ser item no-34 above but 20mm bore. 36 Supply and fixing of 15mm bore G.I tube medium grade freed to wall or under floor complete including cutting chases and make good in CM 1:3 complete all as specified and directed. 37 All as per ser item no-36 above but 20mm bore. 38 Material and labour for PVC connection 45cm long superior quality with PTMT nut on both side . 39 Supply and fixingbib taplong body fancy type 15mm dia chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old PVC tap complete all as specified and directed by Engr-In-Charge. 40 Supply and fixing of 15mm borestop cockconcealed as in repair long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle. 41 Supply and fixing of Angle cockCP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete including taking down old PVC angle cock complete all as specified and directed. 42 Supply and fixing of Pillar cock SWAN NECK, fancy type cast copper alongwith capstan heads, chromium plated, screwed down high pressure , with or without lettred ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe size 15mm including taking down old PVC pillar tap complete all as specified and directed. 43 Supply and fixing125mm dia , Brass chromium plated ,shower rose with swivel joint fixed to GI pipe,complete including taking down old PVC shpwer rose all as specified and directed. 44 Taking down cement plaster from walls/ceiling including raking out joints hacking for key scrubbing down with water etc & dispose off debris upto a distance n exc.500 mtrs where directed complete all as specified and directed. 45 Material and labour for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed. 46 Material and labour for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement including mixing of WPC @3% by weight of cement complete all as specified and directed.Note:- WPC shall be paid under separate item. 47 Material and labour for 10mm rendering in cm (1:3) on ceiling surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 48 Material and Labour for preparation of new plastered surfaces and applying two coatsof cement base paint on wallcomplete all as specified and directed. 49 Material and Labour for preparation of new plastered surfacesand applying two coatsof oil bound distemper over coat of primer on walls complete over 1mm thick wall care putty complete all as specified and directed. 50 Material and Labour for removal of existing treatmentby wire brushing and washing, rubbing down andstopping of surfacesand applying two coatsof oil bound distemper over applying 1mm thick birla wall care putty on walls complete all as specified and directed. 51 Material and labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed. 52 Material and Labour for prepration of existing treatmentby wire brushing and washing, rubbing down andstopping of surfacesand applying one coatof cement base paint complete all as specified and directed. 53 Material and Labour for preparation of old decorated plastered surfaces and applying onecoatsof white washon ceiling complete all as specified and directed. 54 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. 55 Material and labour for 7 to 8 mm thick Non-skid ceramic tiles in floors, exc. 0.18 Sqm but not exc. 0.38 Sqm set & jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. 56 Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting,dado in vertical surfaces etc. and including 10 mm thick cement plaster 1:3 etc complete all as specified and directed. 57 Material and labour for Non-Skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patches to match the existing colour /shed) over and including screed bed 15 mm thick rendering in CM 1:6 complete all as specified and directed. 58 Material and labour for glazed ceramic coloured tiles of size 450 mm x 300 mm x 7 mm on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10 mm thick in cement mortar (1:3), etc. complete all as specified and directed. 59 Material and labour for18 to 20mm thick for machine cut green marble over riser,steps of stairs and skirting stone grinded &polished top of stone to achieve granite mirror finish including rounding edges and nosing including dismantling/roughening of existing old stone complete all as specified and directed. 60 Material and labour for16 to 18 mm thick granite slab as in cooking platform and shelves machine cut flooring,skirting,riser etc incl 15mm thick cement mortar 1:4 set and jointed in neat cement slurry and pointed with coloured cement mixed with pigment to match the shade of slab incl cutting rubbing and polishing incl nosing to the edge of granite stone slab including dismantling/roughening of surface complete all as specified and directed. 61 Material and labour for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in cover slabs (for manhole etc),water tank base and similar work complete all as specified and directed including demolition of existing RCC. 62 Material and labour for RCC (1:2:4) type B-0 using 12.5mm graded aggregate as in slabs supported on walls,beams and columns in floors,roofs,landings,deck slabs,balconies and in shelves including chase cutting and hooking/welding to existing RCC and like including demolition of existing reinforced RCC complete all as specified and directed. 63 Material and labour for RCC (1:2:4) type B-1 using 20 mm graded aggregate as in stairways parapet coping,including steps,staircase railing etc and work of similar type including any formwork required in sides/riser etc complete all as specified and directed. 64 Material and labour for form work to soffits of suspended slab such as roof slab,Floor slab, shelves and chajjas etc and making surface fair finished complete all as specified and directed. 65 Mild steel TMT bars 8 to 10 mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 66 Material and labour for demolition of RCC as in shelves of kitchen and almirah etc ,vertical balcony walls and similar work including cutting reinforcement as required complete all as specified and directed. 67 Material and labour for mild steel work as in railing tubular section or other section for railings and similar worketc complete all as specified and directed. 68 Demolition of PCC as in ground floor or any floor & Paving n.exc 15cm (Below or above) ground level including disposal of rubbish to a distance n.exc 500mtr where directed. 69 Dismantlingof brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed 70 Material and labour for 40mm thick brick tiles laid on cement mortar 1:6, 15mm thick and jointed grouted, flush pointed in cement mortar (1:3) complete all as specified and directed. 71 All as per ser item no-70 above but except tiles. 72 Material and labour for Brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed. 73 Demolition of mud in roofs, any thickness including plastering and leaping etc complete all as specified and directed 74 Material and labour for PCC (1:2:4) type B-1 (20 mm graded stone aggregates) as in padding over roof slab,coping,benching or mud stops and sunken portion bed for slope etc and similar works complete all as specified and directed. 75 Material and labour for cement concrete type F2 1:5:10 (40mm gradedaggregates) as in sunken floor all as specified and directed including demolition of PCC and removal awayfrom residential area. 76 Material and labour for 15mm rendering in cm (1:3) as in sunken portion surfaces including WPC @3% by weight of cement, finished the surfaces even and smooth without using extra cement complete all as specified and directed.Note: WPC should be under sepearate item. 77 Supply and fixing of in repairs 40mm dia GI pipe medium grade as in spout of sunken floor,roof surface all as spesified and directed 78 Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm for roof surface,providing overlap on sides and edges of rooffor overlap including cleaning surfaces etc complete all as specified and directed. 79 Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric(wt not less than 150 gms/sqm) laid on roof(including chase cutting on sides of parapet wall roof for membraneand making good with CM 1:3 as per SSR Part-I), sunken portion laid onbitumen surfaces by forced torching application complete all as specified and directed. 80 Material and labour for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in 50mm thick plinth protection and as in path including demolition of PCC, finishing cement concrete surfaces even and smooth without using extra cement, joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed.complete all as specified and directed. 81 Supply and fixing of machine pressed factory made precast colouredchequered cement concrete tile 30 cm x 30 cm x 25 mm thk set, jointed & pointed inneat cement slurry with greycement and pigmentin floor including screed bed 20mm thick in CM 1:6 bedded and jointed complete all as specified and directed. 82 Material and labour for 75mm thick PCC 1:4:8 type C-2 20mm graded aggregate as in sub base of flooring complete all as specified and directed. 83 Dismantling cast iron/PVC pipe 75/100mm bore fixed to wall/laid in trenches etc includingany type of joints,T,Y,bend etc complete all as specified and directed. 84 Supply and fixing for PVC (SWR) floor trap 110 mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1,complete including dismantling of CI floor trap all as specified and directed. 85 Supply and fixing 110 mm bore PVC (SWR) pipes rain water pipe single socketed in any lengthjoints fixed to walls with and including clamps(Minimum 03 Nos each span any length), nut bolts etc complete all as specified including demolition of existing PVC rainwater pipe complete all as specified and directed . 86 Supply and fixing 110 mm bore PVC (SWR) pipes for sullage,toilet and bath single socketed in any lengthjoints fixed to walls with and including clamps, nut bolts etc complete all as specified and directed. 87 Supply and fixing 75 mm bore PVC (SWR) pipes waste pipe single socketed in any lengthjointslaid in floor, trenchesetc set in cement mortar complete all as specified and directed.and directed . 88 Supply and fixing of PVC(SWR) Junction "T","Y" etc and similar pieces of 110mm equal or unequal with access door to be fitted with PVC pipe complete all as specified and directed . 89 Supply and fixing PVC (SWR) bends with access doors 110mm bore ( in any radius) diminishing peices or tapers (largerbore measured) ,complete all as specified and directed. 90 Supply and fixing PVC (SWR) bends without access doors 110mm bore ( in any radius) diminishing peices or tapers (largerbore measured) ,complete all as specified and directed. 91 Supply and fixing PVC (SWR) reducers 110/75mm dia with access doors, complete all as specified and directed. 92 Supply and fixing of in repair PVC(SWR) vent cowl 110 mm bore complete all as specified and directed . 93 Material and labour for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges ofchajjas, RCC parapets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl necessary renforcement 6mm to 08mm TMT bars , form work, MS wire mesh for boundingthe concreteonground requiredand plaster work in CM 1:3 at any height of buildings making edges fair and even and smooth etc completed all as specified and directed. 94 Supply and fixing of for 4mm thick acrylic sheet board of High qualitywith Media printing of 3m of best quality(size/frame of board, design of bd, type of print on sheet, size of studd, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) complete all as specified and directed incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818). 95 Supply and fixing Godrej pattern cupboard shutter of 0.8-0.85mm thick MS sheet fixed in & including angle iron frame 35x35x5mm including necessary fittings such as CP handle,lugs, hinges, locking arrangement including two coats of synthetic enamalled shop coat spray paints over a coat primer complete and making good with PCC 1:2:4 to dismantled/broken portion complete all as specified and directed. 96 Supplying and fixing 18mm thick PVC sheetin kitchen cabinet shelves and similar works complete all as specified and directed. 97 Material and labour for 18-20mm thick PVC board for shutter one side prelaminatedin shutter of kitchen cupboard etc and including piano hinges 35mm thick electrogalvanised through length of shutter,magnetic catcher,stainless steel handle 100mmone for for each shutter complete all as specified and directed. 98 Supply and fixing of 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. 99 Material and labour for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating for grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not less than 100 mm, then finally apply second layer mix by brush to entire surface of container covering 0.6 - 0.75 Sqm /Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days.Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 metre etc. Make : Pidilite Industries Ltd/ Fosroc India Ltd/ IWL India Ltd, BASF/T-Guard ANTC of Make - Trermax, complete all as specified and directed. 100 Supply only liquid water proofing compound, ISI marked complete all as specified and directed. 101 Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed 102 Material and labour for Point wiring in replacement with 1.5 Sqmm(Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable inNEW PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheetdeemed to be included in the quoted rate. 103 One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way complete all as specified and directed. 104 All as per Srl item No 102 above butfor one 5 amps socket outlet on the Indepedant board complete all as specified and directed. 105 All as per Srl item No 102 above but one Socket outleton the same board complete all as specified and directed. 106 All a per item No102 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm size cable multi stranded FRLScopper wire connecting to common earth dolly complete all as specified and directed. 107 Supply and fixing in replacement switch piano type 6 Amps one way 230 volts 50 Hz AC complete all as specified and directed. 108 Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flushtype 230 volts 50 HzAC complete all as specified and directed. 109 Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts 50 HzAC complete all as specified and directed. 110 Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flushtype 230 volts 50 HzAC complete all as specified and directed. 111 Supply and Fixing in replacementswitchtype regulator 5 step230 volts 100 WattACcomplete all as specified and directed. 112 Supply and fixing in replacement ceiling rose 65/50 mm two to three terminals complete all as specified and directed. 113 Supply and fixing in replacement MCB 40 Amps single pole with neutral (SPN) ,AC 230 Volts 50 Hzcomplete all as specified and directed. 114 Supply and fixing in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of "B"" series in distribution boards complete all as specified and directed. 115 Supply and fixing in replacement Sheet metal enclosure for DB"s when MCB"s to be used Double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified and directed. 116 Supply and fix in replacementfor sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area6.0 Sqmm drawing into and including PVC non metallic rigidconcealed conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium graderigid PVCConcealed conduit, including cutting chases in brick wall,and making good to match the existing specifications complete all as specified and directed. Note :- (i)Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii)Two run of6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS)as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. 117 Supply and fix in replacementfor sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area4.0 Sqmm drawing into and including PVC non metallic rigidconcealed conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium graderigid PVCConcealed conduit, including cutting chases in brick wall,and making good to match the existing specifications complete all as specified and directed. Note :- (i)Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii)Two run of4.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 4.0 sqmm copper conductor cable (FRLS)as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. 118 Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb,back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified and directed. 119 Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated three core 23/0.0076 twisted copper cable from ceiling rode to light fitting complete all as specified and directed. 120 Supply and fixing in LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens complete all as specified and directed. 121 Supply and fixingof security lightmounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat of size 40 x 6 mm and nutsand boltsand painting with aluminium paint, complete all as specified and directed. 122 Supply, laying in trenches or wall including GI protection pipe and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed. 123 Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory madeTPN Vertical4 way 3 phase 415 volts 4 way with 200 Amps rating copper bus bar and PVC insulatedcopper jumpers of suitable size from the MCCB to the out going circuits oneincoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wireof suitable rating complete all as specified and directed. The following accessories :-(a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.(Note:- Out going MCB shall be measured and paid for separately) 124 M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate No. 3 of SSR PART 1 , with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switche, DBs) complete all as specified and directed. 125 Excavation trenches notexceeding 1.5m wideand not exceeding 1.5m in depth for and getting out in any of soil complete all as specified and directed. 126 Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. 127 Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. 128 Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc. ofsize 63mm outer dia and 50 mm inner dia complete all as specified and directed. 129 Supply and laying on wall/ floor etc GI pipe Lightgrade of dia 32 mm for protection of cable complete all as specified and directed. 130 Taking down ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan scrating old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and directed. 131 Supply and fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 amps complete all as specified and directed. 132 Supply and fixing in replacement of bell push 6 amps one way 230 volts 50 Hz AC complete all as specified and directed. 133 Supply and fixing in replacement of bell ding dong AC 230 volts 50 Hz complete all as specified and directed. 134 Supply and fixing of exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers complete all as specified and directed. 135 Supply and fixing of ceiling fans 1200mm sweep at 300/350 RPM copper winding high speed , aluminium body with blade , double ball bearing of BEE star rated includingall accessories connector , canopy, hanging rod and clamps, including electric connection with PVC flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed. 136 Supply and Fixinf of Storage water heater (Geyser) of 25 litre capacity 230V AC, 50HZhaving element of 2 KW of COPPER/INCOLOY alloy , Rust proof outer body,highdensity PUF insulation, BEE 5 Star Rated ,Inner tank of SS 304 which can sustain pressure of minimum 7 Bar working pressure and having multifunction safety valve plug top , making electric and water connection complete all as specified and directed. 137 Supply and fixingof brass chormium plated angle valve, fancy typeof size 15mm dia screwed down for high pressure, complete all as specified and directed. 138 Supply and fixing of Brass chromium plated fancy type bib tabs of size 15 mm diabore short body, screwed downfor GIpipe or for brass ferruleand fixed complete all as specified and directed. 139 Supply and fixing in pvc connection of size 600 mm length 15 mm dia all as specified and as directed. (12 nos for Hot water Supply and 12 No for normal Supply) complete all as specified and directed. 140 Supply and fixing in replacement of LED bulkhead light fittings 10 watt white including LED strip as per IP 65 in engineering plastic housing with clear primatic diffuser and making necessary connection complete all as specified and directed.
|
