Bids Are Invited For Hiring A Specialized Company For The Acquisition Of Furniture For Schools And Cmeis To ... in Brazil

Work Detail

Student Set Size 01, Composed Of Table And Chair: Model Fde/Fnde Cja-01Bstudent Set Size 01, Composed Of Table And Chair: Model Fde/Fnde Cja-01B: Top In Particleboard Wood (Mdp), With Rounded Corners, Thickness 15Mm With Top Coverings In High Pressure Melamine Laminate With Color Textured Finish Gray, Attached To The Structure With 5.0Mm Ø Fit. Column And Longitudinal Beam In Oblong Tube 29 Mm;Chair: Seat And Back Made Of Polypropylene And Fixed To The Structure By Foam Rivets. In Virgin Copolymeter Polypropylene, With The International Recycling Symbol And Affixed By Means Of Snap. Tubular Structure Ø 20.7 Mm (Ch 14).Approximate Dimensions:Cja-01:Backrest 336 Recommended For Children 93 To 116 Cm In Height, Fnde Standard, Stackable Childrens Bedstackable Childrens Bed - Aluminum Structure In Alloy 6063 (High Strength And Durability). Made From 100% Polyester Hollow Fabric Coated With Pvc. Polyester Sewn In Double Weave. Anti-Uv, Anti-Fungal, Anti-Flame, Anti-Oxidant And Anti-Bacterial Treatment. Can Be Washed. Velcro Closure At One End. Reinforced Stitching To Fit The Structure. It Is Not Necessary To Use Tools For Assembly. It Has 4 Individual Feet Made Of Non-Recycled Virgin Pp Polypropylene. Rounded Ends And Corners. Resistant To Loads And Impacts. Non-Slip Feet.-Internal Reinforcement To Prevent Contact Between The Beds When Stacked With Non-Slip Rubber Tips. Dimensions And Tolerances · Length: 1200 Mm +/- 10 Mm; · Width: 670 Mm +/- 10 Mm; · Height Of The Headboards Considering The Tubular Structure: 900 Mm (+Or- 10 Mm) Without Considering The Caster. Features · Inmetro Seal; · Metal Structure In The Shape Of An Inverted U To Support The Headboards And Side Rails, Made Of Carbon Steel Tube, Circular Section Of 1 1/4, In Sheet Metal 16 (1.5 Mm), With Curves In The Upper Corners. Upper Horizontal Bars, Far From The Headboards, So That They Are Configured As Handles For Carrying The Cot. Tube Bend Radius Of 100Mm (+Or- 5Mm) Considering The Tube Axis. · Deck Structure In Carbon Steel Tubes, Rectangular Section With Dimensions Of 40 X 20Mm, 5Mm). · Crib Base (Board) Made Of One-Piece Mdp Sheet, 18Mm Thick, Covered On Both Sides In Low Pressure Melamine Laminate (Bp) In White Color. · Platform Height Adjustment System Using M6 Screws And Nuts Welded Internally To The Top Of The Platform Structure Tubes. Adjustment Of The Platform In Height In At Least Three (03) Positions, Only Using Tools. · Fixed Side Rails Made Of Mdp, With A Thickness Of 20Mm In The Horizontal Parts, And 18Mm In The Vertical Parts, Covered On Both Sides In Melamine Laminate.

Contact Information