|
Tender For Renovation Work Of Dooni Barrage. - Earth work in cutting in ordinary soil including 1.50m lift and 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil bank within 30m distance as directed by Engineer- in-Charge. 2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.112.1 work (Two or more coats applied @ 1.43 Itr/ 10 sqm) over existing cement paint surfaceincluding all cost of labour, material and T&P etc. Complete. 3 Supplying and Laying of 240 GSM Geotextile sheet below Pitching on slopes & top of shank including all cost of labour, material and T&P etc with all taxes but excluding cost of G.S.T. required for proper completion of work as per Engineer-In-Charge. 4 Laying Sand BelowBoulder Pitching including all cost of labour, material and T&P etc. Complete (as per drawing) 5 Relaying dry boulder pitching including dismantling of old and damaged pitching with 20 to 40 kg boulder, with cost of all new material , labour, T&P etc for completion of work per cum. 6 Supply and filling of mechanically woven double twisted Hexagonel shaped wire mesh gabion box/crate of size 3.00 x1.50x 1.00 M mesh size 10 cm x 12 cm 10 SWG G.I. wire with 40kg. to 60kg. boulder size as directed by Engineer in charge & also including all cost of material, labour & T&P etc. 7 Supply and Dumping of Boulder Size 40-60Kgboulder size as directed by Engineer in charge & also including all cost of material, labour & T&P etc. 8 Supply & Fixing SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM Supplying, installation, testing and commissioning, roof top solar photo voltaic power generation system including space fram 5KW Solar System including all cost of Battery, Solar pannel and Solar Inverter Material, Labour, T&P Etc. Complete. 9 S&F of 32 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.Cat. B 10 S&F of 16 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.Cat B 11 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve 12 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 13 Cement Concrete 1:3:6 Cement , Sand and Aggregate i/c all cost of labour, material and T&P etc. complete. 14 Cement Concrete 1:2:4 Cement , Sand and Aggregate i/c all cost of labour, material and T&P etc. complete. 15 M150 Class Brick Work in 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. 16 Struk Deep Pointing in 1:2 Cement Mortar i/c all cost of labour, material and T&P etc. complete. 17 Plastering upto 3m height with 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. 18 Boulder Pitching of 20 to 40 Kg. Boulderi/c all cost of labour, material and T&P etc. complete. 19 Earth work in embankment by power transported earth with a lead beyond 200m and upto 1.00 Km. including Excavation, loading, unloading , Manual Compaction, dressing and all lifts complete. 20 Centering & shuttering for R.C.C./R.B. work including cost of centering & shuttering up to 3.0 m. height.c all cost of labour, material and T&P etc. complete. 21 Reinforcement including Bending, binding, cutting and placing of reinforcement including cost of binding wire but excluding cost of steel. i/c all cost of labour, material and T&P etc. complete. 22 Supplying Placing and Fixing Lightning poll and post and hardware tabular street light, 7.00 M height, with Galvanised min. of zinc coating 360 gsm sqm including all Labour, material T&P etc. Complete 23 Supplying Placing and Fixing Cast Iron powdered coated garden bench including all Labour, material T&P etc. Complete 24 Supplying Placing and Fixing Garden swing with seat and roof 3 seater with 5mm seat thickness and corrosion resistant pipes have capacity 136kg. including all Labour, material T&P etc. Complete 25 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 26 Supplying Placing and Inverter based LED street light of 70W including all Labour, material T&P etc. Complete 27 Supplying Placing and Fixing Outdoor twin waste bins of capacity 60x2=120 L including all Labour, material T&P etc. Complete 28 Fountain in outdoor with supply, all fittings and construction including with LED lights, umbrella jet Nozzle with Dia 3mwater body & height 3m of water body finishing with tiles, 0.5hp tullu pump with centrifugal pump with electric paneli/c all cost of labour, material and T&P etc. complete. 29 Providing and Planting of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge. 30 Providing and Planting of flowers plant Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 31 Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30MPa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of Interlocking tiles levelling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by Engineer-in-Charge. 32 Supplying & fixing sign board size 0.60x0.90 m made by angle iron 35x35x5 mm with steel of 18 SWG with bracing of 25x5 mm flat iron including excavation of pit 30x30x45 cm and fixing in C.C. 1:2:4 with painting and writing letters as per direction of Eng-in-Charge. 33 Providing and fixing G.l. chain link fabric fencing of required width in mesh size 50x50 mm, made of G.I. wire of dia 4mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required also including Mild steel angles with Excavation in foudation, 1:3:6 CC Concrete,Brick Work, Mild Steel Iron work, Plastering as per required, as per drawing, Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface complete as per the direction of Engineer-in-charge
|
