|
Electronic Set For Soldering-Digital Clock With Led Display Purpose: Designed For Independent Assembly Of Electronic Watches With The Function Of Displaying Time, Temperature And An Alarm Clock. Suitable For The Educational And Practical Purposes Of Beginner Radio Amateurs And Schoolchildren. Short Description: The Set Is A Radio Designer For Soldering And Assembling Electronic Desktop Watches With Led Display. As Part Of The Set: Printed Circuit Board, Electronic Components, Housing. The Device Operates On The Basis Of A Microcontroller And Supports A Dynamic Led Indication With Several Visual Effects. The Functions Of Displaying The Current Time, Measurement Of Temperature, An Alarm Clock With A Sound Signal Are Implemented. Technical Characteristics: Type Of Device: Digital Clock (Diy For Soldering) Display: Led (Led) Functions: Display Time, Temperature, Alarm Clock: Microcontroller Power: Through The Corresponding Source Of Direct Current (Adapter In The Kit Or External Power-Depending On The Configuration) The Case: Material-Glass/Plastic Weight With Packaging: Not More Than 0.1 Kg Dimensions Of Packaging: - Length: Not Less Than 17 Cm - Width: At Least 8 Cm - Height: At Least 6 Cm Complex: Printed Circuit Board Electronic Components (Resistors, Condensers, Microcircuits, Leds, Etc.) Case Instructions For Assembly, Black Pill Stm32f411ceu6 Mini Core Board (With 25M Hse), Mcu Stm32f411ceu6 Negizindogi Zhndasa Sipattam Stm32f411ceu6 Negapiden Blackpill V3.1 Series Weact Studio Zhunda Taktasy. Sipattamalary - Microcontroller: Tүpnұka Stm32f411ceu6 Chip, 100 Mhz, 128 Kb Zhedel Jada, 512 Kb Rom; - 25 Mhz Zhogary Zhilikiktz Generators Zhoke 6Pf Sүzu Coefficient Bar 32.768 Kgz Tөmen Ziliktz Quartz Generators; - C Tilindogi Damuda Koldau; - 3 Tүyme: Kalpin Keltira Tүymesi, Boot0 Tүymesi, Paydalanusy Tүymesi; - Kiris Kerneui 3.3 - 5 V, Ldo Maximalda Shygys Togy 3.3 In 100 Ma; - Interface: Usart X 3, I2c X 3, Spi X 5, Usbfs X 1, Adc X 1 (10), I2s X 5, Crc X 1, Tim X 8; - 2.54 Mm X 2 Kadammen 20 Izstіkeshelі Engiza/Shyuer Interface; - 2.54 Mm Kadammen 4 Istiklі Zhondu Interface; - Usb Type-C Kazakhshy. Technicaly Parameter Salmagi, G 15, The Module Of The Measurement Sensor Of The Magnetic Induction Angle As5600 (12 Bits, High -Precision) Purpose: Contactless Measurement Of The Rotation Angle With High Accuracy For Use In Positioning Systems, Engine Control, Robotics And Other Electronic Devices. Description: The Module Is Based On The As5600 Magnetic Sensor, Which Provides A 12-Bit Resolution Of The Rotation Angle. The Sensor Supports Several Data Output Modes: The I2c Digital Interface, The Pwm Signal And The Analogue Output Voltage. It Is Characterized By High Accuracy And Reliability In A Wide Range Of Operating Temperatures. Technical Characteristics: Type Of Sensor: Magnetic Non -Contact Encoder Of The Angle Resolution: 12 Bits (4096 Positions For Turnover) Determined Angle Range: From 18 ° To 360 ° Determans: I2c (Scl, Sda) Shim (Pwm) Analog Output Voltage Voltage: 3.3 V (Operating) Maximum Allowable Voltage Voltage Vdd5v: Up To 6.1 In The Maximum Permissible Voltage On Vdd3v3: Up To 4 In The Rotation Line (Dir) To Indicate The Direction Of Changing The Angle Of The Operating Temperature Range: From -40 ° C To +125 ° C Of The Module: 23 × 23 × 2 Mm Weight: 2 G: 2 G, The Workpiece For The Printed Circuit Board, Unilateral, Foil Folk Fiberglass Fr-4, 200 × 300 Mm Purpose: It Is Designed For The Manufacture Of Unilateral Printed Circuit Boards During Prototyping And Fine Production Of Electronic Equipment. It Is Used For Manual Or Mechanized Assembly Of Electronic Circuits Using Etching Methods, Milling And Drilling. Main Characteristics: Type Of Material: Foil Folk Glass Fr-4 Type Of Board: One-Sided (Copper Applied On One Side) Sizes: 200 × 300 Mm (20 × 30 Cm) Material Thickness: 1.5 Mm Copper Foil Thickness: Standard (35 Μm) [Unverified-If Not Indicated] Foundation Color: Light Green Surface Treatment: Without Protective Coating: Without Protective Coating: Without Protective Coating: Without Protective Coating (Raw Copper Layer) Type Of Insulating Material: Epoxy Glass (Fr-4)-Fire-Resistant Fiberglass Density Of Copper: 1 Ounce Per Square Foot (Optionally Specified By The Supplier) [Unverified] Mechanical Properties: Allows Mechanical Processing: Drilling, Cutting High Strength For Bending Stability To Temperature And Electric Loads In Standard Soldering Conditions Application: Production Of Prototypes And Individual Printed Circuit Boards. Educational And Laboratory Work Radio Amateur Radio And Experienced Dimensions And Mass: Sizes: 200 × 300 × 1.5 Mm Mass: About 50 G, Purpose: A Training Set For The Development Of The Basics Of Digital Electronics, The Logic And Principles Of Constructing The Simplest Digital Schemes. Designed For Individual And Group Training Of Schoolchildren And Students, As Well As For Use In Educational Institutions In The Framework Of Electronics, Physics, Robotics And Information Technologies. Main Characteristics: Type: Electronic Educational Set Age Category: It Is Recommended For Use From 12 Years Of Design: Without The Need For Soldering (Work On The Layout) Type Of Power Elements: 1 × Battery 9 In The Type Of “Krona” (Included) Platform: Macaken Platter (Bredboard) Interface Components: Digital Logical Microchemicals, Resistors, Library, Library, Lediods, Lediodes, Lediodes, Lediods, Lediods Buttons And Other Electronic Components Sample Projects: Logical Elements, Digital Control Schemes, Simple Devices And Automation Modules Settage: Make Board For Assembling Circuits - 1 Pc. Battery 9 V (Krona) - 1 Pc. Connecting Wires - At Least 20 Pcs. A Set Of Electronic Components (Resistors, Leds, Switches, Capacitors, Transistors, Microcircuits) - At Least 30 Elements Assembly Guide And Methodological Manual - 1 Pc. Packaging - Cardboard Box The Overall Dimensions Of The Packaging: Length: 160 Mm Width: 180 Mm Height: 60 Mm Weight In Packaging: 0.28 Kg, A Manual Tool For Removing Solder (Tin Open) Purpose: Designed To Remove Molten Solder When Dismantling Electronic Components From Printed Circuit Boards. It Is Used In Conjunction With The Electric Gun In The Electronic Industry, Workshops For The Repair Of Equipment And In Educational Institutions. Short Description: A Syringe Type Tool With A Return Piston. Removes A Molten Solder Due To The Creation Of Negative Pressure When Activating The Mechanism. Equipped With A Fixation Button And A Spring Return Mechanism. Provides Fast And Convenient Rewinding. Simple In Maintenance And Operation. Technical Characteristics: Type: Mechanical Tin -Observoos Mechanism: Spring, 4366 Adafruit Tlv493d Trasose Trantrotor - Stemma Qt / Qwiic Compact Module Based On The Infineon Tlv493d Sensor With Low Energy Consumption And Digital I²c Interface. Compatible With Microcontrollers Stm32, Arduino, Esp32 And Other Systems. Supports Connection Through Standard Stemma Qt / Qwiic Connectors. Technical Characteristics: Measurement Range: ± 130 Mtl (Millitsla) Resolution: Up To 0.098 Mtp Connection Interface: I²c (Stemma Qt / Qwiic) Operating Voltage: 3.3 In Energy Consumption: <10 On (In The Standby Mode) The Overall Dimensions Of The Module: 25 Mm × 17 Mm × 3 Mm Weight: About 2 G Of 2 G. Compatibility: Stm32, Arduino, Esp32, Etc., Designed To Measure The Strength Of Direct And Alternating Current In The Range Up To ± 30 Amperes. It Is Used In Industrial, Automobile, Commercial Systems, As Well As In Communication Systems And When Developing On The Basis Of Microcontrollers (Arduino, Stm32, Etc.). Short Description: Acs712 Current Sensor Provides An Analog Output Signal Proportional To The Measured Current. It Works From A Power Source Of +5 V, Has High Sensitivity And Low Internal Resistance, Which Allows You To Accurately Measure The Current With Minimal Losses. It Has A Quick Response Time (5 Μs) And A Wide Temperature Range Of Work. Technical Characteristics: Operating Voltage Of The Power: 5 B In The Maximum Measured Current: ± 30 A Sensitivity: 133 Mv/A Sensor Resistance: 1.2 Mom Output Signal: Analog, Voltage Proportional To The Current Response Time: 5 Μs Connection Mode: Three Outputs - Vcc (Power), Gnd (Earth), Out (Analog Output) Temperature Range -40 ° C To +85 ° C Gabarit Dimensions: 31 Mm × 13 Mm, Stm32l052c8t6 Microcircuit, Zy-204 Dәnekerlenbegen Tatasi (1660 Tүreuish) Zy-204 Dәnekerelenbegen Nan Tatasy (1660 Tүreuish) Igi Zhonduu Үshin Nemes Nemes Birnezhehhomi Zhaksy Zhomiy Oststy. Takta Ken Zhomia Kenistigin, Metal Substrate Қramdas Bөlikty Қaty Bekitudi Yuhnasuyyyzdyan Barliyk Әu Қuypsіz Orsh Kamtamasyz Etedi. Taktadagy Ұylardy Perty Sanya - 1 660, Onya 400 Ұyas Қatyat Zhelelerine Bөlingen. Material Of Substrate-Aluminum, Taktaalar -Ar-Bs Plastic, Terminal Kysystary-Maximalda Kernou 300 V (3-5 Salmagi 345 G Өlshemider 215 X 130 X 11 Mm, Designed For An Accurate Contactless Measurement Of Distance To Objects Using Time-Of-Flight (Tof) Technology. It Is Used In Robotics, Obstacle Detection Systems, Autofocusing Cameras, Safety Systems, Contactless Switching Switch And Other Areas Where An Accurate Determination Of The Distance Is Required. Short Description: The Vl53l0x Laser Rangefinder Module Is Based On The Phase Measurement Of The Light Of Light (Tof). By Radiating An Infrared Beam With A Wavelength Of 940 Nm, The Module Measures The Shift Of The Reflected Signal Phase To Calculate The Distance With An Accuracy Of ± 3%. The Module Is Equipped With A Built-In Power Converter And Ttl Levels, Which Provides Compatibility With Microcontrollers 3.3-5 V Without Additional Equipment. Data Is Controlled And Read Through The I2c Interface. Technical Characteristics: Communication Interface: I2c (Twi) Distance Measurement Range: 0 - 2000 Mm Measurement Accuracy: ± 3% Length Length Of Radiation: 940 Nm (Infrared Range) Power Voltage: 3.3 - 6 In Consumption Current: 10 Ma (Worker), Peak Current - Up To 40 Mm Module Dimensions: 18 × 13 × 2 Mm Weight: 2 G Additional Additional Conclusions: Xshut (Turning Off The Sensor), Gpio1 (Interruption Output) Built -In Components: Power Converter And Ttl Level Converter, Sitting In A Wire With A Flux (Coil) Purpose: Designed For Manual Soldering And Poking Of Radio Electronic Components Using A Soldering Iron. It Is Used In Radio Industry, Educational Institutions, Repair Shops And Electronics. A Brief Description: A Solder With A Flux Core Provides A Clean Soldering Without The Formation Of Lumps And A Scaly Structure. After Soldering, An Even, Brilliant Seam Forms. Suitable For Working With Printed Circuit Boards, Does Not Require Additional Cleaning After Soldering. Provides Rapid Melting, Cooling And Hardening Of Solder. Technical Characteristics: Steel Diameter: 0.8 Mm Mass: 100 G Of Tin Content (Sn): 60 % Pig Content (Pb): 40 % Flose Content: 2 % Flux Type: Built -In (Inside Wire) Melting Temperature: From 250 ° C To 300 ° C. Fluse Remains After Soldering: Does Not Require Cleaning The Appearance Of The Seam: Shiny, Uninterrupted, Unlawful, Uniform, Uniform., Diy For Soldering: Led Equalizer (Light Music) Purpose: Designed For Independent Assembly And Subsequent Use As A Visual Equalizer. The Device Reacts To Sound And Reproduces Light Effects With The Help Of Leds That Light Up Music Or Voice. A Brief Description: An Electronic Training Set Is A Design, Including A Printed Circuit Board, Leds, A Sound Sensor And Other Electronic Components. After Assembly, The Device Can Display Led Animation Depending On The Level Of Incoming Sound. Power Is Carried Out Through Usb. Suitable For Radio Amateurs, Schoolchildren, As Well As For Teaching The Basics Of Soldering And Electronics. Technical Characteristics: Type: Set For Self-Assembly (Diy), Led Light Music Number Of Components: At Least 169 Leds: At Least 40 Type Of Indication: Led, Visual Equalizer Reaction To Sound: There Is (Built-In Microphone Or Audio Value) Source Source: Usb 5V (Microusb-Deposit) Effects: Light, Reacting To Sound. The Complexity Of The Assembly: The Initial Level Age Limit: 10+ Equipment: Printed Circuit Board - 1 Pcs Electronic Components - Kit (Resistors, Condensers, Transistors, Leds, Etc.) Acrylic Case - Included Instructions For Assembly - It May Be Absent, The Assembly Is Made Independently Of Packaging: Weight: No More Width: At Least 13 Cm Height: At Least 3 Cm, Designed To Measure Atmospheric Pressure And Temperature As Part Of Navigation, Meteorological, Altomers And Other Electronic Systems. It Can Be Used In Weather Stations, Quadrocopters, Variometers, As Well As To Determine The Height Based On Atmospheric Pressure. Short Description: The Gy-Bmp280-3.3 Module Is An Improved Pressure Sensor With Compact Dimensions, Low Energy Consumption And High Accuracy. It Has A Factory Calibration. Supports I2c And Spi Interfaces, Which Provides Universal Connection To Various Microcontrollers And Electronic Platforms. The Sensor Can Be Used In Educational Projects, Monitoring Systems, As Well As In Hobbies And Professional Projects. Technical Characteristics: Power Voltage - From 1.71 To 3.6 V. Current Consumed - About 2.7 Mks At A Measurement Frequency Of 1 Hz. Supported Interfaces- I2c And Spi (3- And 4-Wire Modes). The Maximum Data Transfer Speed By I2c Interface Is Up To 3.4 Mhz. The Range Of The Measured Pressure Is From 300 To 1100 Hectopascale (Gpa), Which Corresponds To The Height Range From -500 To +9000 Meters Above Sea Level. The Level Of Pressure Noise Is Up To 0.2 Pa (Equivalent To 1.7 Cm In Height). Temperature Measurement Accuracy Is Up To 0.01 ° C. The Overall Dimensions Of The Module Are Not More Than 21 × 18 × 2 Mm. Mass - No More Than 3 G., Designed To Measure The Earth’S Magnetic Field Along The Three Axes And Determine The Direction To The North. It Is Used In Navigation Systems Of Aircraft, Such As Radio -Controlled Aircraft, Helicopters And Quadrocopters. Short Description: The Module Is A Three -Axle Digital Magnetometer With An Interface I2c, Which Provides A High -Precision Indication Of The Magnetic Field Direction. Allows You To Measure A Magnetic Field With High Sensitivity And Accuracy, Determine The Azimuth And Direction Of Movement. Technical Characteristics: 3 - 5 In Working Current: 100 Mka Magnetic Field Measurement Range: ± 1.3 To ± 8 Gauss Accuracy Of Measurement: From 1 ° To 2 ° Interpretation Interface: I2c Range Of Operating Temperatures: 0 ° C - +55 ° C The Moisture Range: 5% - 95% Of The Dimensions Of The Module: 19 × 13 × 12 Mm Mm 12 Mm Mm 12 Mm Mm, Manual Tool - Pinzet Direct Metal Antimagnetic Purpose: Designed To Perform Accurate Installation, Repair And Service Work In Radio Electronics, Instrumentation And Other Sectors That Require Accurate Fixation And Move Small Components. Short Description: Direct Tweezers, Made Of Stainless Antimagnetic Steel. Resistant To Corrosion And The Effects Of Weak Acids And Alkalis. Provides Accurate Capture And Retention Of Small Details. Compact And Light Tool With Resistance To Magnetization. Technical Characteristics: Direct Material: Stainless Antimagnetic Steel Length: At Least 120 Mm Width: At Least 10 Mm Weight: At Least 10 G Resistance To Magnetization: Yes Surface: Matte Or Polished, Not Sliding, Electronic Diy Designer-A Set For Soldering Desktop Watches With A Display And An Alarm Improving: Designed For Self-Assembly Of Electronic Desktop Watches With The Function Of The Alarm Clock, Display Time, Date, Temperature And Additional Visual And Sound Effects. Suitable For Learning Soldering, The Initial Development Of Radio Electronics And The Development Of Technical Skills In Children From 10 Years And Older. Short Description: The Set Is A Training Kit, Including More Than 50 Electronic Components And An Acrylic Material Case. After Assembly, The Device Displays The Time, Date, Day Of The Week And Temperature, And Also Performs The Functions Of The Alarm Clock And The Hourly Sound Signal. There Is An Automatic Decrease In The Brightness Of The Display In Low Light Conditions. Technical Characteristics: Type Of Device: Desktop Watches (Diy Set For Assembly And Soldering) Type Of Power:-Main: Through Microusb-Backup (For Storage Of Settings): Cr1220 Battery Materials: Electronic Components, Case Of Transparent Acrylic. Number Of Elements: At Least 50 Main Functions: Display Of The Time Of Environmental Temperature Day Of The Week Of The Hourly Sound Signal Automatic Adjustment Of The Brightness Of The Screen (Depending On Illumination) Effects: Sound And Light Age Category: 10+ Skills Developed During Assembly: - Soldering, Reading Circuits, Attentiveness, Perseverance Required Tools (These Are Not Included): - Soldering Iron Or Soldering Station, Solder, Unit Kit: Set Of Electronic Components Labeling Acrylic Elements Of The Case Instructions For Assembling The Dimensional With Packaging: Weight: No More Than 0.1 Kg Length: At Least 15 Cm Width: At Least 9 Cm Height: Not Less Than 4 Cm, Manual Tool - Twin -Bended Metal Anti -Magnetic Purpose: Designed To Perform Accurate And Inaccessible Installation And Repair Work In The Field Of Electronics, Jewelry, Micromechanics, As Well As When Working With Sensitive Electronic Components. Short Description: Curved Tweezet, Made Of Stainless Antimagnetic Steel. Provides Convenient Capture And Fixation Of Small Parts At An Angle. Suitable For Working With Components Sensitive To Static Electricity And Magnetic Fields. It Has Resistance To Corrosion And Deformations. Technical Characteristics: Type: Curved Material: Stainless Antimagnetic Steel Length: At Least 120 Mm Width: At Least 10 Mm Weight: At Least 10 G Resistance To Magnetization: Yes Surface: Matte Or Polished, Non -Slip, Product Name: Auxiliary Device For Soldering With A Magnifying Lens (So -Called Third Hand) Purpose: It Is Designed To Fix Small Parts And Nodes During Soldering, Installation, Repair Of Electronics, As Well As For Visual Increase In Small Objects. It Can Be Used In Radio Electronics, Jewelry, Collecting And Other Accurate Works. A Brief Description: The Device Is A Stand With Two Self -Loaders Of The Crocodile Type And A Magnifying Magnifying Glass Installed On Articulated Joints. Provides Sustainable Fixation Of Parts And Allows Us To Conveniently Perform Manipulations With Two Hands. The Magnifying Glass Is Fixed On A Moving Holder, Which Allows You To Accurately Configure The Viewing Angle. Technical Characteristics: Material: Metal Linza Material: Glass Exception: 2X Number Of Holders: 2 Pcs., With Clamps Of The Type Of “Crocodile” Type Of Fastening Of Holders And A Magnifier: Hinged With Fixing Screws Sizes: At Least 125 × 70 × 50 Mm: At Least 350 G The Stable Base For Accommodation On The Desktop, Designed For Accurate Measurement Of Direct Current Parameters: Voltage, Current Strength And Power Consumed In Electrical Circuits. It Is Used To Control The Charge And Discharge Of Batteries, Power Sources And Various Loads. Short Description: The Module Is Based On The Ina219 Chip, Which Provides High -Precision Measurements With Zero Drift And Automatic Determination Of The Current Direction. The Module Supports Calibration To Increase Accuracy. The Ability To Change The I2c Address Allows You To Connect Up To Four Devices Per Tire. It Operates At The Supply Voltage From 3 V To 5 V, Provides The I2c Digital Interface With A Maximum Speed Of Up To 3.4 Mhz. Technical Characteristics: 3 V -5 V In Maximum Measured Voltage: 26 In Maximum Measured Current: Up To 3.2 A Interface: I2c Maximum Speed I2c: Up To 3.4 Mhz Resolution Of Adp: 12 Bits Filtering: Averaging The Temperature Range Of Work: From -40 ° C To +85 ° C To A Working Voltage In A Working One Range: No More Than 100 Μv Automatic Determination Of The Current Direction, The Ability To Connect Up To 4 Devices Per I2c Tire Due To A Change In Address
|
