|
School Chair With Adjustment Front Class: Fixed Without Screws, Sustained By 25Mm X 25Mm Tube With 1, 9Mm Thickness, Both Whole, No Amendments, Folded By The Conformation Process, Positioned Under The Clipboard, Linked To The Structure Of The French -Hand Chair. The Adjustment Device At The Bottom Of The Horizontal Clipboard Is Made Up Of 1.1/8 ”Industrial Steel Round Tubes Surrounding The Plastic Bushings And 3/4” Round Industrial Steel Rails, Fitting To The Square Tube 25Mm X 25Mm That Are Under The Clipboard And Are Protected By A Counter -Made Of Pp Fit. Pp Clipboard By The Injection Process, Measuring: 560Mm X 390Mm (+/- 10%). The Design Of The Sides Being So That One Fits The Other When They Are Side By Side. Front Edge Measuring 40Mm High And Rear Edge Measuring 30Mm High (+/- 10%). With Pencil Door In The Horizontal Position And Next To The High -Relief Cups, The Area Free Of Work With Enough Space To Accommodate 02 Leaves A4 Side By Side. Chair With Seat And Backrest In Polypropylene. Seat With Minimum Measurements 400Mm X 460Mm (+/- 10%), Height/460Mm Floor Without Holes Fixed By Screws. Backrest With Minimum Measures 400Mm X 360Mm (+/- 10%), With Handle And Books Made Of High Impact Thermoplastic Resin, Polypropylene, Closed In The Rear And Side Parts Covering Part Of The Structure That Interconnects The Base Seat Base. Base Of The Seat And Interconnection To The 16Mm X 30Mm Tube Backrest, Covered By The Backrest, A Horizontal Bar For Support Under The 5/8 Tube Seat. Strengthened Structure With 02 29X58mm Oblong Tube Side Columns In 1, 50Mm Thickness And Feet Made Of High Impact Plastic Resin (Pp) In Plain Finish Arc Form. (75% Main Quota - Wide Competition), 50Mm Thickness And Feet Made Of High Impact Plastic Resin (Pp) In The Form Of A Plain Finish Arc. (Reserved Quota Of 25% - Exclusive For Me/Epp), Childrens Trapezoid Set - (Composed Of 06 Tables With Books, 06 Chairs And 01 Central Table). Table Table, Enabling The Formation Of Circles With 6 Tables; 06 Chairs And A Central Table, For Collective And Individual Use, Table Top Made Of Thermoplastic Resin With Minimal Measurements: 550Mm X 200Mm With 350Mm Deep Endowed With Transverse And Longitudinal Ribs For Traction Reinforcement At The Bottom. Chair With Seat And Backrest Manufactured Using Thermoplastic Resin Injection Process, Ensuring Durability And Resistance, Has Premium Finish, And Minimum Measures: 330Mm X 300Mm Depth, Height/Floor 349Mm, Fixed By Screws. Backrest With Minimal Measures: 330Mm X 180Mm High, The Backrest Should Be Fixed By Village Or Screws. With Dite At The Bottom Of The Seat, Top, Book Holder And Central Table Containing Date Of Manufacture. Non -Slip Shoes Involving The Ends Of The Pipes That Make Up The Feet, Performing The Function Of Protection Of Painting By Preventing Rust, Injected Into Thermoplastic Resin, Virgin Polypropylene And Stuck To Est
|
