|
Tender For Provision Of Certain Bldg Including Central Library At Sewar Fort In Mil Stn Bharatpur; 1 M&L for surface dressing n. exc.15 cm deep in soft/loose soil complete all as specified and directed. 2 M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. 3 Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 square meter on plan and not exceeding 1.50 meter in depth and getting out in soft/ loose soil complete all as specified and directed.Note : Dewatering & timering/shoringto excavation if reqd shall be arranged by contractor during construction. The rate qouted by contractor shall deemed to be inclusive of the same & nothing extra shall be paid agianst this. 4 Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil complete all as specified and directed. 5 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed. 6 Removing excavated material n. exc. 250 mtr and n.exc. 500 mtrdepositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed. 7 Material and labour for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate including compaction of concrete, curing etc. complete all as specified and directed. 8 M&L RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed. 9 M&L for Reinforced cement concrete (design mix M-25) in columns, pillars, piers, posts and struts complete all as specified and directed. 10 M&L Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels over 1.50 meter span complete all as specified and directed. 11 M&L for Reinforced cement concrete (Design Mix, M-25) in chajja complete all as specified and directed. 12 M&L for RCC M-25 for Slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 13 M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 14 S&F mild steelDeformed or twisted bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 15 All as per item No. 14 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. 16 M&L Form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces complete all as specified and directed. 17 M&L Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed. 18 M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. 19 M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 20 M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. 21 M&L Brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6 meter mean radius built in cement sand mortar 1:6 including curing, racking of joints etc. complete all as specified and directed. 22 M&L Brick work with sub class "B" old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. 23 M&L for brick work with sub class ‘B’bricks,using old size bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 24 M&L Damp proof course in Cement concrete type B-0 1 :2:440mm thick to horizontal orvertical :surfaces including necessary formworkApplying evenly a coat blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed. 25 M&L for Rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified & as directed. 26 M&L for rendering 5 mm thick cement sand mortar 1:4 using water proofing compound @ 3%, over 10 mm thick rendering in cement sand mortar 1:6 as in plaster to external surfaces of walls finished even & smooth without using extra cement complete all as specified and directed. 27 Supply only Integral waterproofing compound complete all as specified and directed. 28 M&L for Rendering 5 mm thick in cement and sand mortar 1:3 onfair faces of cement concrete surfaces of ceiling ofchajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified and directed. 29 M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement complete all as specified and directed. 30 M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. 31 Material and labour for preperation of surfaces and applying three coats of white wash to ceilling complete all as specified and directed. 32 M & L Preparation of new decorated plastered unplastered surfaces surface of wall including cornices, pilasters etc by brooming down andapplying two coats of distemper oil emulsion white or tinted over 3 mm thick wall care putty on Wall Surface usingwith alkaliresistant priming paint complete all as specified and directed. 33 Material and labour for preperation of surfaces and applying two coats of apex weather proof over a coat of primer to walls (External) complete all as specified and directed. 34 M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 35 M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set andjointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing in CM 1:4 inskirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 36 M&L for Vitrified Light Shade ceramic tiles 10 mm thick (Square/rectangular) area of each tilenot exceeding 0.36 sqm ,over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 37 M&L for 75 mm thick PCCtype D-2 1:4:8 using 40 mm graded stone aggregate as in sub base under floor over rammed earth complete all as specified and directed. 38 M & L for PCC30mm thick 1:2:4 Type B-0 as in sub base offloor complete all as specified and directed. 39 Material and labour 50mm thick PCC type C-2 1:3:6 as in plinth protection complete all as specified and directed. 40 M&L Cement Concrete Type D-2, 1:4:8 40mm graded aggregate 100mm Thick complete all as specified and directed. 41 M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigment over 25mm thick bed of sand cushioning complete all as specified and directed. 42 M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete all as specified and directed. 43 M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 44 Rolling and consolidating formation surfaces with power roller Exc. 8 tonne and n. exc 12 tonne complete all as specified and directed. 45 Material and labour for treating the top surface of filled earthat the rate of 5 liters of emulsion per square meter of surface complete all as specified and directed. 46 M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 47 M&L ATT for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. 48 M&L Hardcore of gauge n exc. 63 mm, broken stone or boulders ,deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface complete all as specified and directed. 49 Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified and directed.(Note :- Punning thickness shall be measured.) 50 M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement @3 %WPC Shall be meashured and paid seperatly complete all as specified and directed. 51 M&L Providing and applying fibre reinforced elastomeric liquid water proofingmembrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratiof 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified and directed. 52 M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring 40 mm thickfinished even and smooth with using extra cement complete all as specified and directed. 53 M&L for providing precast cement concrete 1:2:4 type B1 20 mm graded aggregate as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articals with plain faces including chamfers, weatherings, throatings etc and set in cement mortar 1:4 complete with joints to match complete all as specified and directed. 54 M&L for 150 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested Coomplete all as specified & directed. 55 M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed. 56 Construction of soakage well 2.4 mtr dia and 3.0 mtr deep complete all as specified & shown as perdrawing.Drg No. CEJZ/ 2004/TD/S-35(1/1) 57 M&L for plain cement concrete type C2 1:3:6 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. 58 M/L Providing cement concrete in copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates complete all as specified and directed. 59 S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. 60 S & Fpowder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door, hinges anodized aluminium snap beading screw etc complete all as specified and directed. 61 S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 2 Nos suitable handle 1 Nos complete all as specified and directed. 62 S&F three track three panels powdre coated sliding window with fly proof SS wire meash (02 Nos glazed & 01 No wire mesh panels) made of frame 92x44mm & sash 32x60 mm both having wall thickness 1.9+ 0.2mm and single glazing bead of appropriate dimension (area of window upto 1.75sqm), including aluminium extruded interlock, EPDM rubber gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screw etc. proflie of frame and sash shall be mitred cut and fusion welded at att corners, including drilling of holes for fixing hardware"s after fixing frame the gap between frame and adjustment finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all as per approved drawing and section of engineer in charge. 63 S&F Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 64 S&F aluminium anodised grill DG-202/MG-107 of Deco Grill fixed with required section including all fixtures of approved make complete all as specified and directed.Note : (i) Make shall be of M/S Decogrill of M/S associated or equivalent as approved by GE. (ii) Min Thickness of anodized shall be 15 Microns 65 S&F toughened glass of approved make and brand of 12mm thick coloured/ tinted/ smoke / clear glass confirming to IS-2563(Part-I) 1990 for partition using glazing clips,cleats and special metal sash putty alongwith all fixings and fixtures. complete all as specified and directed. 66 S&F Sheet glass 5.50mm thick ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed. 67 S & F Figured glass,3mm thickpin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and directed. 68 M&L for providing and fixing 4mm thick Aluminium Composite Panel (ACP) Sheet for partion,door of approved make,color & shade.Joint of sheet to be finished with selecon based sealent also including all fittings & fixtures complete all as specified and directed. 69 S&F Stainless Steel curtain rod 25mm dia fixed with and including fancy type matching pair of brackets and pair of End Cap of Stainless Steel fixed with SS screw complete all as specified and ditected. 70 S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified and directed. 71 Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVCsheet to be fitted in the M.S. frame welded/sealed to the stiles & railswith suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2020 (Part-II) and Particular specification complete all as specified and directed. Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic.. 72 S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified and directed. 73 S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified and directed. 74 S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and directed. 75 Supply, jointing & tersting steel water tubing, medium grade galvanised with and including necessary pipe fittings/accessories like sockets, unions tees, elbows ,cutting chases etc and fixed to or concealed in walls and ceiling or laid in floors, complete of following sizes:-(a) 15mm bore 76 (b) 20mm bore 77 S & F 15mm bore bib taps, fancy type cast copper alloy chormium plated with crutch or butterfly handle, screwed down screwad for iron pipe or for brass ferrule and fixed complete all as specified and directed. 78 S & F 15mm bore, stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends (external threaded) for iron pipe or for unions and fixed complete all as specified and directed. 79 S &F Rotational moulded polyethylene water storage tanks 500 Ltr(cylinderical vertical with closed top)with ball brass valves,high pressure 20mm , with polythene float and flynut complete, hoisted and fixed in position all as specified in SSR part - I and complete all as specified and directed. 80 S&F for Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, fccessories set and Dual flush Cistern incl. all Fittings, Size: 370x670x720 mm, S Trap-300mm complete all as specified and directed.Make;- Jaquar Registered design LYS-WHT-38851S300UFSMN or eqv in Perryware , Hindware ) 81 S & F 20mm bore,Gun metal gate valve painted, finish with forged brass spindle and iron wheel head, screwed both ends internally IS:778 class 2 for iron pipe or for unions and fixed complete all as specified and directed. 82 S & F PVC connections 15mm size with PTMT nuts of lenght 450mm complete all as specified and directed. 83 S&Fwall mixer of bathroom 3 in 1 system with provision for both hand & over head shower ,with 115 mm long bend pipe ,connecting legs & wall flage complete all as specified and directed. Make;- Jaquar Registered design Cat Part No.FUS -29281 or eqv in Perryware , Hindware ) 84 S & F15mm bore angle Cock chromimum plated complete all as specified and directed. Make - Jaquar ,parryware or equivalent . 85 S&F for inBrass Chromium plated central hole basin mixer without popup waste system withwith 450 mm long braided hoses complete all as specified and directed. Make;- Jaquar cat part no QQP-7167BPM 10101 or eqv in Perryware , Hindware ) 86 S&F inviterous china Table Top Basin with CP waste coupling, Size: 565x425x140mm complete all as specified and directed. Make;- Jaquar Registered design KUS-WHT-35935 or eqv in Perryware , Hindware ) 87 S&F Brass Chromium plated Bib Cock with Wall Flange complete all as specified and directed. Make;- Jaquarcat part no DRC-37037 or eqv in Perryware , Hindware ) 88 S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified and directed. 89 S&F frameless looking mirror of selected quality glass withchromium plated brass screws and cup washers complete all as specified and directed. Make:-ATUL / GOLDEN FISH / GOLDEN EAGLE 90 S&F MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified and directed. 91 S&F for Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System complete all as specified and directed. Make;- Jaquar Registered design no.276017 or eqv in Perryware , Hindware ) 92 S&F aluminium anodised tubular towel rail, 20mm dia, "D" type, 60cm long between flanges complete all as specified and directed. 93 M&L cast iron nahani trap of 75mm bore complete all as specified and directed. 94 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,ISI marked of 75mm bore complete all as specified and directed. 95 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified and directed. 96 S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type "B", ISI marked of 75mm bore complete all as specified and directed. 97 S & F 110mm PVC (SWR) bend complete all as specified and directed. 98 S & F 110mm PVC (SWR) junction single, (SingleT) equal or unequal with access door complete all as specified and directed. 99 S & F stainless steel handle of 110mm size of best quality a sper approved sample complete all as specified and directed 100 S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified and directed 101 S & F colour powder coated mild steel continuous (piano) hinge, width of flaps (when open) is 30mm complete all as specified. 102 S & F 75mm PVC (SWR) bend withaccess door complete all as specified and directed. 103 S & F 75mm PVC (SWR) bend complete all as specified and directed. 104 S & F 110mm PVC (SWR) vent cowl complete all as specified and directed. 105 S&F Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook complete all as specified and directed. Make:- Jaquar cat part no ALD-587 or eqv in Perryware, Hindware. 106 S&F Grab bar 600mm Long, Stainless Steel complete all as specified & as directed.Make;- Jaquar cat part noACN-1101S or eqv in Perryware, Hindware. 107 S&F Towel Ring Square with Round Flange complete all as specified & as directed.Make;- Jaquar cat part noACN-1121N or eqv in Perryware , Hindware. 108 S&F Soap Dish Holder complete all as specified & as directed Make:- Jaquar cat part noACN-1131N or eqv in Perryware , Hindware ) 109 S&F For Toilet Roll Holder with Stainless Steel Flap complete all as specified & as directed.Make:- Jaquar cat part noACN-1153S or eqv in Perryware, Hindware. 110 S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified & as directed.Make:- Jaquar cat part no ACN-1181S or eqv in Perryware, Hindware. 111 S&F for Corner Glass Shelf (with BracketComplete all as specified & as directed.Make:- Jaquar cat part no ACN-1173 or eqv in Perryware, Hindware 112 S & F PVC awning 0.5 to 1.00mm thick sheet single side coatedfixed over 1.5"X1.5" aluminium square pipe frames grouted to wall, columns and beams etc with 12mm dia fatenners and shape as per required complete all as specified and directed. 113 S &F 18mm thick solid PVC ply of first quality of one side prelaminated ofapproved colour and one side white colour fixed with screw "solvent cement/adhesive to make cupboard shutter complete all as specified and directed.Make : Rajshree/Sintex orequivalentmake approved 114 S &F 18mm thick solid PVC ply of first quality of both side white colourfixed with screw "solvent cement/adhesive to makeshelves, partitions and drawers etc for kitchen cabinet and cupboards complete all as specified and directed.Make : Rajshree/Sintex Rajshree/Sintex or equivalentmake approved 115 Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished,Granite of any colour and shade machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. rubbing, cutting, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed. 116 Supply & laying 25mm GI pipe medium gradewith all fittings laid in trenches in old/new position as complete all as specified and directed. Note: Item rate to be quoted include the rate of connection to main DI pipe line. 117 Supplying &fixing gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778of 25 mm borecomplete all as specified and directed. 118 M&L for brick protectionwith sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified and directed. 119 Boring of holes under road, pavement, hard standing by trenchless technology usingnecessary machine andT & P for laying under ground pipe up 100mm bore completeNote :- GI pipe shall be measured and paid in concern Item 120 Supply & lay 100mm GI tubingmedium grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc complete all as specified and directed. 121 Supply & lay 50 mm GI tubinglight grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc complete all as specified and directed. 122 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes:-(a)95 SqmmX 3½core 123 (b)35 SqmmX 3½core 124 S&F in repair PVC cabinet with mirror, size 350 mm x 450 mm, fixed to wall with screws complete all as specified and as directed. 125 Supply, install, commissioning and testing factory made (including CPRI type test certified manufacturer) LT panel box (KIOSK) out door type platform mounted suitable for 415 volt , 3 phases, 4 wire , 50 Hz ACsupply system all as specified and directed having busbar chamber with insulated copper bus bars 300 amps rating installed on percelain insulators, the panel shall be dust and vermin proof double door made of 3.15 mm CRCA MS sheet outer & inner and individual compartment for MCCB/MCB & volt/Ampsmeter.The complete feeder pillar box should be power coated including connections between main bus bar to outgoing MCCB/MCB shall be carried out by copper busbar 63Amps and above MCCB & below 63Amps by 16 Sqmm copper cable. Front opening type with approx for cable entry with double door shutter including locking arrangement as per manufacturers with 2 Keys. Incoming:- (a) MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type, 200 Amps with 35 KA rapturing capacity-01 No.(b) Bus bar copper300 Amps- 01 Set of 4(c) Digital Voltmeter with selector switch -01 No.(d) Digital Ammeter with CTs, with selector switch - 01 No.(e) Indicator lampfor three phase and seletor switch complete as required(f)ON load Changeover 200Amp, 4 pole -01 NosOutgoing:-(a) MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type, 160 Amps with 25 KA rapturing capacity-01 No.(b)MCCB 4 Pole, 415 V,Thermal Magnetic release, Adjustable type, 63 Amps with 25 KA rapturing capacity-04 No.Note: -(i) Drawings of LT panel shall be got approved by GE before Manufacture.(ii) Panel stand shall be made out of 50X50X5mm ISA angle of 60cm height and appropriate size as per panel. The same should be fixed in PCC below ground level 30cm and above ground level 20cm. 126 M & L earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth strip 32 x 6mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on complete all as specified and directed. Note :- The cost of 7.5m long galvanised iron earth strip of 32 x 6mm size and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate. 127 M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in rigid PVC conduit pipe size not less than 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size SS metal flush boxfor mounting of modular fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but unsheathed copper earth continuity conductor (in green color) to common earth and connedcted to earth dolly complete all as specified and directed for the following :-(a) One light point controlled by one way switch. 128 (b) One wall fan/exhaust fan point controlled by one way switch. 129 (c) One 3 pin 6 Amp socket point outlet on the same board with other switches 130 (d) One 3 pin 6 Amp socket point outlet on the independent board 131 (e)One bell/buzzer point controlled by one push button 132 All as per item No 1 above for modular fittings but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire (in green color) including connecting to common earth dolly complete all as specified and directed. 133 S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC boardcomplete all as specified and directed. 134 S&F modular Socket, 6A - 2/3 pin combined 2 module 230 volt complete all as specified and directed. 135 S&F modular switch 1 way6 Amps 1module 230 volt grade complete all as specified and directed. 136 S&F modular Bell push switch 1 way6 Amps 1module 230 volt grade complete all as specified and directed. 137 M &L Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and directed. 138 S&F modular Switch socket outlet 3 pin 5 amp" flush type 3 module 230 volt complete all as specified and directed. 139 S&F modular Switch socket outlet 3 pin 15 amp" flush type 3 module 230 volt complete all as specified and directed. 140 S&F modular step type electronic fan regulator 2 module,230 volt80 watt complete all as specified and directed. 141 S & F white cover plate with frame,2 module complete all as specified and directed. 142 S & F white cover plate with frame,3 module complete all as specified and directed. 143 S & F white cover plate with frame,4 module complete all as specified and directed. 144 S & F white cover plate with frame,6 module complete all as specified and directed. 145 S & F white cover plate with frame,8 module complete all as specified and directed. 146 M&L submain wiring complete with 2X 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductorand one run of 6 Sqmm copper cable for earth continuity conductorand including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified and directed. 147 Supply & fix 4 way VTPN Distribution Board (with provision for MCCB as incomer & WiNtrip MCB as outgoing) complete all as specified and directed. Make-Cat No-DBVTL004DD L&T or equivelent in Havells/C&S 148 Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs in Make: L&T/C&S/Havells etc:-.(a) 8 way SPN with 200 amps rated busbar 240 volts (double door type). 149 S&F MCCB/MCB415/240 voltsfixed in DB"s of the undermentioned type and rating. Note: Make of MCCB/MCB should be same of DB.(a) MCCB 4 pole 100 Amps, 415 volts,18kA 150 (b)MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) 151 (d)MCB SPN40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) 152 Supply and fixing LED20 watt LED tubelight fitting retro fit type with replacable rod complete with all accessories and including connecting up withthree core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.Make-Crompton/Phillips/Surya/Helonix/Havells 153 S&L pipe galvanised medium class completeincluding fittings 15mm dia complete all as specified and directed. 154 S & F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed. 155 Supply & fix25 watts LED streetlight fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source and suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor from fittingsto the ceiling rose and fixing to complete all as specified and directed.Make-Crompton/Phillips/Surya/Helonix/Havells 156 S&F modular enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB ofSP 20 Amps, 240 volts complete all as specified and directed. 157 S&Fceiling fan (white) of 1200 mm sweep, 5 star ratingcopper wound with super energy efficient BLDC motor including remot,connecting wire PVC insulated twisted flexible0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified and as directed.Make:-Havells or equivalent in crompton/ orient/Bajaj. 158 M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base complete all as specified and directed.Make-Crompton/Phillips/Surya/Helonix/Havells 159 S&F LED mirror light fitting 1 x 9 W 230 volts attractive wall / ceiling mounted type withdecorative grey end caps, polycarbonate body and ribbed opal diffuser.matallic channel and white refelector suitabale for mirrior fitting,complete with all accessoris prewired and including connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm size complete all as specified and directed. Make-Crompton/Phillips/Surya/Helonix/Havells 160 S&F exhaustfan of 250 mm sweep 900 rpm with suitable size oflouvers, connecting wire PVC insulated twisted flexible0.5 sqmm copper conductorincluding all standard accessories complete all as specified and as directed.Make: Havells Model: Ventil Air - DX White or equivalent makes in Cromption/Khaitan/bajaj etc 161 S&F wall fan of 450 mm sweep including all fitting and fixture complete all as specified and directed.Make: Havells or equivalent in crompton/Bajaj. 162 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high, efficiency PMMA diffuser soft glare free light complete, with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three, core flexible copper conductor cases of suitable size, complete all as specified and directed. 163 M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 15 mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on complete all as specified and directed.Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate.
|
