|
Tender For Repair/Maintenance Of Certain Wooden/Steel Furniture, Including Painting,Polishing And Canninig At Lekhapani Under Ge Dinjan No 2.; 1 TABLE DINING 6 PERS 2 Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 3 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 4 (c) Replacement oflong railsmade of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directed. 5 (d) Replacement ofshort railsmade of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directed. 6 BED HARD STEEL OFFICER:- 7 (a) Removing unserviceable plywood top and supply & fixing 6"x3"x12mm commercial BWR plywood complete all as per drawing and as directed. 8 (b) Replacement of 18mm pre laminated particle board old unserviceable foot boardof "Bed hard steel ", complete all as specified and directed. 9 (c) Replacement of 18mm pre laminated particle board old unserviceable head boardof "Bed hard steel ", complete all as specified and directed. 10 TABLE COMPUTER 11 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 12 (b) Replacement of unserviceable key board tray with telescopic chanel as per drawing complete all as specified and as directed. 13 (c) Replacement of drawer made of 18mm thick particle board as per drawing complete all as specified and as directed. 14 (d) Replacement of unserviceable Table bottom 18 mm thick particle board with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 15 (e) Replacement of unserviceable particle board self of 450mm x 250mm with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 16 (f) S & F of bottom rubber shoe for table leg all as per drawing and as directed. 17 (g) Replacement of unsrerviceable knob and handle of dwarer as per drawing and as directed 18 CHAIR CB "A" SPECIAL WITH HAND REST :- 19 (a)S & F of new wooden plank hand rest of size 575 mmx255mmhard wood fix with screw and complete all as per drawing and as directed. 20 (b)S & F of new wooden plank hand rest of size 50 mmx300mmhard wood fix with screw and complete all as per drawing and as directed. 21 BED PLYWOOD TOP :- 22 (a) S & F of new head board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercial other side, BWR grade by replacing old unserviceable head board of "Bed ply wood top"complete all as specified and directed. 23 (b) S & F of new foot board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercialother side, BWR grade by replacing of old unserviceable foot boardof "Bed ply wood top", complete all as specified and directed. 24 (c) Replacement of long rail of bed plywood top made out of 2nd class hard wood and complete all as per drawing and as directed. 25 (d)Replacement of short rail of bed plywood top made out of 2nd class hard wood and completed all as per drawing and as directed 26 (e) Replacement of leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 27 (f) Removing unserviceable plywood top and supply & fixing 6"x3"x12mm commercial BWR plywood complete all as per drawing and as directed. 28 SOFA SET 5 SEATER 29 (a) Replacement of old u/s /unhygienic cushion of size 560x530mm with 100mm thick 32 densitycushion, Make as approved. The best quality tapstry cloth cover duly stiched with provision of velcro to be provided to the cushion all around as approved and as directed. 30 (b) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed. 31 (c) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 32 (d) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 33 (e) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 34 (f) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed. 35 SOFA SET 4 SEATER 36 (a) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed. 37 (b) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 38 (c) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 39 (d) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 40 (e) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed. 41 PEG TABLE : 42 (a) Replacement of unserviceable table top made of 18mm thick particle board of size 450x300mm one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 43 (b) Replacement of leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 44 (c) Replacement of top rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 45 (d) Replacement of bottom rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 46 TABLE WRITING /WRITING MED 47 (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 48 (b) Replacement of table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed. 49 (c) Replacement of drawer side made of 12mm thick Plywood, BWRgrade and 6mmplywood of the bottom all as per drawing complete all as specified and as directed. 50 (d) Replacement of shutter made of 18mm thick particle board, Exterior grade as per drawing complete all as specified and as directed. 51 (e) Replacement of stiffiner made of2nd class hard wood all as per drawing complete all as specified and as directed. 52 TEAPOY WOODEN :- 53 (a) Replacement of unserviceable top made of 18mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 54 (b) Replacement of leg made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 55 (c) Replacement of top rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 56 (d) Replacement of bottom rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 57 TABLE DRESSING LADIES :- 58 (a) S & F of looking mirror of size 1220x380x5mm including taking down unserviceable timber beading shall be provided all around the edge of the mirror including fixing of ply wood 6mm BWR on the back side of mirror and shall be attached to wooden frame as shown in the drawing complete all as specified and as directed. 59 (b) S & F 1.5mm plastic laminated sheet to top of table dressing ladies with adhesive as shown in the drawing complete all as specified and as directed. 60 (c) Replacement of back of table dressing ladies made of 6 mm BWRplywood complete all as specified and as directed. 61 (d) Replacement of drawer made of 18mm thick particle board as per drawing complete all as specified and as directed. 62 (e) Replacement of unserviceable chromium plated knob as per drawing complete all as specified and as directed. 63 (f) Replacement of unserviceable glass shutter with alluminium chanel as per drawing complete all as specified and as directed. 64 (g) Replacement of unserviceable leg of made out 2nd class hard woodall as per drawing complete all as specified and as directed. 65 TABLE 3’X2’ WITH/ WITHOUT DRAWER (900X600X760MM) 66 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mmall around the top as per drawing complete all as specified and as directed. 67 (b) Replacement of table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed. 68 (c) Replacement of side stiffiner made of 2nd class hard wood all as per drawing complete all as specified and as directed. 69 (d) Replacement of bottom rail made of 2nd class hard wood all as per drawing complete all as specified and as directed. 70 (e) Replacement of drawer made of 12mm thick BWR plywood all as per drawing complete all as specified and as directed. 71 TABLE BED SIDE 72 (a) Replacement of unserviceable top made of 18 mm thick particle board,Exterior grade one side teak veneer finish beaded with 4mm thick timber all around the top complete all as specified and as diercetd. 73 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 74 (c) Replacement of shelves by fixing 12mm thick BWR plywood as per drawing complete all as specified and as directed. 75 TABLE CENTRE 76 (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 77 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 78 (c) Replacement of side stiffiner made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 79 (d) Replacement of long rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed 80 (e) Replacement of short rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed 81 TABLE DINING 4 PERS 82 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 83 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 84 (c) Replacement of rails made of 2nd class hard wood timber hollock rest all without damaging adjacent parts as per drawing complete all as specified and as directed. 85 CHARPOY GI PIPE WITH NYLON NEWAR :- 86 (a) Taking out old warn out unserviceable newar from existing charpoy GI and tightning of Charpoy GI with pipe wrench andS&F Plywood 12mm , commercial ply, BWR grade as per IS 303 of size 1980x950mm. Plywood shall be fixed over three nos stiffeners of 25mmx25mm x16 gauge MS tubewelded parallel to the short rails in equal distance. 8mm dia round head countershank bolts and nuts with washer shall be used by drilling 2 holes on each stiffernes complete all as specifed and as directed 87 (b)Dismantling old broken/unserviceable long rail and S&F 32mm bore GI pipe medium grade, ISI marked as new long rail for GI Charpoy as per FD-220 including threading at both ends and provision of two check neuts of 6mm thick suitable for 32mm bore pipe complete all as specified and as directed.(Note : Each long rail shall be measured separately) 88 (c )Dismantling old broken/unserviceable short rail and replacing the same by using the GI Pipe obtained under dismantling of long rails by cutting into required size including threading at both ends for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each short rail shall be measured separately) 89 (d) Dismantling old broken/unserviceable legs and replacing the same by using the GI Pipe obtained under dismantling of short rails by cutting into required size including threading at one end for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each leg shall be measured separately) 90 (e )Dismantling old broken/unservieable 3 way elbow and provide 3 way elbow suitable for 32mm bore pipe (weight not less than 415gms) complete all as specified and as directed. 91 TABLE DINING 8 PERS 92 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 93 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 94 (c) Replacement of long rails made of 2nd class hard woodall without damaging adjacent parts as per drawing complete all as specified and as directed. 95 (d) Replacement of short rails made of 2nd class hard woodall without damaging adjacent parts as per drawing complete all as specified and as directed. 96 CHARPOY HARD TOP STEEL 97 (a) Taking out old warn out unserviceable Plywood from existing charpoy steel and S&F Plywood 12mm , commercial ply, BWR grade as per IS 303 including black colour painting to all expoposed steel surface of charpoy with spary machine.Plywood shall be fixed over the cleats with nuts and botls with washer complete all as specified in drawing and as directed 98 TEAPOY VERANDAH :- 99 (a) Replacement of unserviceable top made of 18mm thick particle board of size 600X450mm with white finish beaded with PVC beading 18x1.8 mm all around the top complete all as specified and as directed. 100 (b)Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Teapoy Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frameall as specified and as directed.. 101 (c) Provn ofwelding to the broken Joints/Parts of TEAPOY VERANDAH upto 4-6 joints including providing MS conduit pipe 19/20mm, 16 Gauge(upto the required length approx 610mm long to Each Chair duly fabricated) for replacing broken Parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. 102 CHAIR VERANDAH 103 (a) Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Chair Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frameall specified and as directed. 104 (b)Provn ofwelding to the broken Joints/Parts of CHAIR VERANDAH upto 4-6 joints including providing MS Conduit piper 19/20mm ,16 Gauge (upto the required length approx450mm long to each chair duly fabricated)for replacing broken parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. 105 (c)Recanning of CHAIR VERANDAH closely with nylone newar 55mm wide, after removal of existing old unsv newar and including providing one coat of synthetic enamelled white paint to the existing Frame of CHAIR VERANDAH , complete all as shown in Drawing/as specified and as directed. 106 Taking out the existing old unserviceable wooden components without damaging adjacent part and S & Fnew wooden components made of 2nd class hard wood and complete as specified in drawing and as directed :-(a)CHAIR WRITING 107 (i)Front Leg 108 (ii)Rear Leg 109 (iii) Rail 110 (iv) Stiffener 111 (v)Arms 112 (b) CHAIR DINING 113 (i)Front Leg 114 (ii)Rear Leg 115 (iii) Rail 116 (c)CHAIR EASY 117 (I)Front Leg 118 (ii)Rear Leg 119 (iii)Rail 120 (iv)Stiffner 121 (v)Arms 122 CHAIR DINING OFFICERS 123 Removal of old unserviceable cushioned seat and M & L for fixing of new cushion seat with foam 75mm thick , 40 density over 12mm ply board without damaging adjacent part as per drawing and complete all as specified and as directed. 124 (I)Front Leg 125 (ii)Rear Leg 126 (iv)Stiffner 127 RECANNING OF CHAIRSRemoval of unserviceable plastic cane from chairsand M&L for recanning of plastic cane half round type 2.0 to 2.5mm wide and border with 3.0 to 3.5mm plastic cane as approved in Godrej pattern all as specified and as shown in drawing/as directed. 128 (i) Chair Dining 129 (ii)Chair Writing 130 (iii)Chair Easy 131 (iv)Chair CB "A" Special with Hand Rest 132 Preparation of following wooden furniture surfacess by applying one filler coat of Multani mitti, smoothing, rubbing with sand paper and polishing with two coats of french/sprit polish on exposed surface to achieve high glossy finish, complete all as directed by Engineer-in-charge. 133 (a) BedHardPly Top 134 (b) Book shelves open large wooden 135 (c) Table Dinning 6 Pers 136 (d) Table Dinning 8 Pers 137 (e)Table dining 4 pers 138 (f) Hat stand with mirror. 139 (g)Chair easy 140 (h) Chair writing 141 (j)Chair dining 142 (k)Chair dining long back 143 (l) Stool dressing 144 (m) Table bed side 145 (n)Table Peg. 146 (o) Table writing writing/Table writing medium 147 (p)Table Centre 148 (q) Teapoy wooden 149 (r) Table dressing ladies with mirror 150 (s)Table dressing gents with mirror 151 (t)Table 3" x 2" with Drawer. 152 (u)Table 3" x 2" without Drawer. 153 (v) Table office clk wooden 154 (w) Table office officer wooden 155 (x) Sofa Set 4 seater with cushion (Map) 156 (y)Sofa Set 5 seater with cushion 157 (z) Side board 158 (ab) Table 2"x2"x760mm 159 Preparation of surfaces of following steel fur byfilliing all holes and cracks or detoriated spots of old painted steel furnitureby applying oil putty and rubbing to make up smooth finished surfaces of both internally and exernally and applying two coats of synthetic enameled paint by spray comlete all as specified and directed by Engineer-in-Charge. 160 (a) Almirah steel large/ Almirah 1/2h 1/2S steel 161 (b) Almirah steel med 162 (c) Table office clerk steel 163 (d) Table Office Officer steel 164 (e) Locker bed side steel 165 (f)Table Computer 166 (g) Bed Hard Steel 167 (h) Table Steel 3"x3" 168 (j) Rack Six Tear Steel 169 Supply and fix of lock as existing shape and size of brass bright finish with key in duplicate and key holes protector with lid for each lock to including removing the old unserviceable locks complete for Almirah large steel with 1/2 H , 1/2S all as per Drg 170 All as per the item No 27 but hereinbefore almirah large steel with shelves as per Drg 171 All as per the item No 27 but hereinbefore almirah med steel with shelves as per Drg 172 All as per the item No 27 but hereinbefore almirah small steel 1/2H, 1/2S as per Drg 173 All as per the item No 27but hereinbefore Book case open large steel 174 All as per the item No 27 but hereinbefore almirah Table office offrs/Clerk steel all as per drg 175 Supply and fix chromium plateed steel handles of approved quality suitable shape & size for almirah large steel all as per drg 176 All as per the item No 33 but hereinbefore almirah steel med all as per drg 177 Supply and fix handle stainless steel / MS anodised 100mm long ""C" type for locker steel after dismantling old unserviceable handles all as specified and directed 178 Supply and fix GI clamps suitable for fixing shelves of lockers steel, Almirah Med and Almirah large, fixe with machine screws all as specified and directed 179 M/L for removing of unserviceable back of table bedside MAP and supply and fix new back suitable for the existing table bedside made of 6mm thick plywood all as per drg 180 As per item No 37 hereinbefore but Top of Table Bedside all as per Drg 181 As per item No 37hereinbefore but Side of Table Bedside all as per Drg 182 M&L for removing of unserviceable drawer of table bedside MAP and supply and fix new Drawer suitable for the existing table bedside all as per drg 183 Supply and fix new steel handles suitable for the existing table bedside MAP and all as per drg 184 Removing the existing worn/torn out Faded tapsetry cloth/Rexine providing as per required New tapsetry cloth/Rexine for seat / back of chair writing MAP, Visitors Chairs, Computer chair and variou type of revolving chairs complete. 185 Removing the existing damaged/ unserviceable gas lift of chair computer, chair executive and different types of revolving chairs and providing new gas lift and make good centre pivot mechanism of revolving chair computer chairs etc including tilt tension adjustment complete all as per Drg 186 Removing the existing damaged castor wheels of various type of revolving chairs/ computer chair / table computer of any description and providing as required new castor wheel of suitable design and as specified and directed. 187 Removing the existing damaged hand rest of various type of revolving chairs/computer chair / chair writing or visitor chair and providing as per exisitng shape & size new hand rest of suitable design and as specified and directed.
|
