|
Tender For Provision Of Ladies Toilet And Changing Room At Main Guard Room, Addn/Altn To P-353,366/45 And Certain Mw At Hqtc; 1 COMMON ITEMS APPLICABLE FOR JOB "A" , JOB "B", JOB "C", JOB "D", JOB "E" & JOB "F" 2 Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in soft/looose soil complete all as specified anddirected. 3 Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings,chajjas and similar work; not excee ding 200mm thick(Horizontal or sloping) in chajjas; flat rough finished surfaces of concrete complete all as specified and directed. 4 M&L Reinforced cement concretetype A1, 1:1.5:3 (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 5 S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 6 M&L Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed. 7 M&L Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed)type C1, 1:3:6 ( 20 mm graded aggregate)and setting in cement mortar 1:4 , complete in walls all as specified and directed. 8 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in walls all as specified and directed. 9 M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, finished even and smooth without using extra cement complete all as specified and directed. 10 M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smoothwithout using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by complete all as specified and directed.Note: WPC shall be measured and paid separately 11 Supply only liquid water proofing compound of approved quality complete all as specified and directed. 12 M&L Preparation of old plastered surfaces and applying one coat of cement base paint through mechanical means complete all as specified and directed. 13 M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 14 S&F Powder coating (minimum thickness of powder coating 50 micron) anodisedaluminium window and ventilator shutters, sliding /side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mmlong (2 nos.) suitable handle (1no.) complete all as specified and directed.Note : Sheet Glass and SS wiremesh shall be measured and paid separately. 15 S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 16 S&F Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable wooden roundbase and fancy type end top matching to curtain rod of make asapproved by GE complete all as specified and as directed. Note:Additional supporting bracket shall be provided if length is exceeding 1.2 m and rate quoted shall be included for the same. 17 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. 18 S&F 100mmmild steel butt hinges, medium weight, cold rolled complete all as specified and directed. 19 M&L for 75 mmthick PCC 1:2:4 type B1 (using 20 mm gradedstone aggregate) for hard standing / surface channels including finishing the surface even and fair complete all as specified and directed. 20 M&L Sand cushioning including watering for Interlocking tiles/cable protection complete all as specified and as directed.Notes for dry sand in cable protection: 1) Dry sand shall be laid for protection of cable 8 cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover and punning of sand shall be done using suitable T&P as per site requirement.2) Punned thickness of sand i.e 18 cm shall be considered for measurement purpose 21 S&F Mild steeltrussed, purlins, fencing posts,crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) Conforming to Fe-290 Gde E-165 including distance pieces, cleats , nut & bolt any size & length complete all as specified and directed. 22 S&F Mild steel flats40x6 mm thick forhand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and directed. 23 S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as requiredFe 410-O or Fe 310-O complete all as specified and directed. 24 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqdcomplete all as specified and directed. 25 Demolition of cement concrete(unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level)complete all as specified and directed. 26 M&L Plain Cement Concrete Type B0, 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast bed plates filling hollow section of pressed steel frame and the like including use and waste of form work weathering, slightly rounded or chamfered angles and throatingcomplete all as specified and directed. 27 S&F Mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings Including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including distance pieces, cleats, nut & bolt any size & lengthcomplete all as specified and directed. 28 S&F Mild steel Plates (plain or chequered) Fe-410-W(Gde-E-250) quality B channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 29 S&FMild steel flats 40x5 mm thick for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc.. and similar work confirming to Fe 410-Oor Fe 310-O compelte all as specified and as directed. 30 M&L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed. 31 M&L for preparing of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. 32 M&L for point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC Casing & CappingISI markedbroken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing on stone walls / brick masonary walls /ceilings /floors etcmodular MS sunken boxes with earth dollyfor mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green.and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for One 5 pin socket point 5 Amps on independent board. 33 S&F Modular switch , 1Module single pole one way10 Ampscomplete all as specified and directed. 34 S&F Modular socket , 2Module6 Amps, 5 pin, 230 volts AC complete all as specified and directed. 35 M&L for sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC Casing & CappingISI markedbroken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and directed. Note-Two runs of 2.5 sqmm single core cable and one run of 2.5 sqmm earth wire including PVCcasing & capping togethershall be measured as one unit. ( (item 31 of job b(E&M) + item 4 of job f =200+200 =400) 36 S&F Modular switch , 1Module single pole one way16 Amps complete all as specified and directed 37 S&F Modular socket , 2Module6/16Amps, 6 pin, 230 volts AC complete all as specified and directed. 38 S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed. 39 S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified and directed. 40 S&F Modular white cover plate with frame, 3 module complete all as specified and directed. 41 S&F Modular white cover plate with frame, 4 module complete all as specified and directed. 42 S&F Modular white cover plate with frame, 6 module complete all as specified and directed. 43 S&F Modular metal flush box 3 module complete all as specified and directed. 44 S&F Modular metal flush box 4 module complete all as specified and directed. 45 S&F Modular metal flush box 6module complete all as specified and directed. 46 S&F LED Light fitting, 4 feet1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 47 S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 48 S&F LED light fitting 10 Wattsbulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 49 S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose includingbrackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing ofstreet light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified and directed. 50 S&F Sheet metal enclosure for DB"s double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified and directed. 51 S&FMCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified and directed. 52 S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified and directed. 53 S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick/stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified and directed. 54 S&F BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and remote to control all the function of fan complete all as specified and directed. 55 M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hingedand frame of angle iron 25x25x6mmwith 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GIprotection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. 56 Notes: (i) The unit rate shall include 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate shall include galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthingis recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department. 57 S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified and directed. 58 Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting pointcomplete all as specified and directed. 59 Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed. 60 Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armouredheavy duty electric cable 1100V grade with aluminum conductor of cross sectional area50 sqmm 3.5 core and connecting up incoming/out going cables connection with suitable size lugsandtesting complete all as specified and directed. 61 ITEMS APPLICABLE FOR JOB "A" 62 Site clearance including clearing away all grass vegetation, saplings, shrubs, brushwood, under growth,and removing rubbish upto a distacne of 50 metres outside the periphery of the area on soft/loose soil complete all as specified and directed. 63 M&L Anti termite treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 64 M&L Anti termite treatment Treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill shall be measured for payment purpose) complete all as specified and directed. 65 M&L Anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed. 66 M&L Anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and directed. 67 M&L Plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation complete all as specified and directed. 68 Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. complete all as specified and directed. 69 Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. complete all as specified and directed. 70 Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etccomplete all as specified and directed. 71 Use and waste of Formwork to edges of concrete flats, treads, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed. 72 M&L Reinforced Cement Concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) for foundations, footing, plinth beams, bases for columns etccomplete all as specified and directed. 73 M&L Reinforced cement concrete type A1, 1:1.5:3 ( using 20mm graded aggregate ) as in column, pillars, piers, posts and struts complete all as specified and directed. 74 M&L Reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span complete all as specified and directed. 75 S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. 76 M&L for 25 mm thick Damp Proof Course in cement concrete 1:2:4, Type B-0 to horizontal or vertical surfaces including necessary formworkcomplete all as specified and directed. 77 M&L Moorum /red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed. 78 Spreading and levelling earth filling in floors in layers and well ramming including watering as required (soil obtained from item No 2.00)complete all as specified and directed. 79 M&L Hard core of guage not exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 80 M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub basecomplete all as specified and directed. 81 M&L Non skid ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed. 82 M&L Coloured Glazed Ceramic tiles 450 x300x7-8 / 600x300x7-8mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. 83 S&F in repairs 18 mm thick veneered decorative plywood,grade 1( with BWR resin), with decorative face veneers on both facesfixed with screws to timber frame work for built in cupboards, shelves,almirahs etc complete all as specified and as directed. 84 M&L Granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in cement mortar 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed. 85 Rounding to edges of stone slabs one edge, such as in steps, window cills, cooking platform, and other similar situations complete all as specified and directed. 86 M&LRendering 10 mm thick on brick work or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified. 87 M&L Rendering 5 mm thick in cement mortar 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed. 88 M&L for preparation of new plaster surface of wall and applying2 coats ofdistemper oil emulsion white or tinted through mechnical meansover a coat of 1mm thick wall care putty, complete all as specified and directed. 89 M&L preparation of newly plastered surfaces of walls and applyingthrough mechnical means two coats of Premium Acrylic Smooth exterior emulsion paint over and including priming coat of exterior primer complete all as specified and directed. 90 M&L forcomplete removal of existing treatmentof old plastered surfaces of walls and applying through mechanical means with 2 coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth complete as specified and directed. 91 S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete as specified and directed. 92 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 93 S&F Powder coated(minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 1.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete as specified and directed. 94 S&F 4.80 mm thick sheet glass ordinary quality and glazing not exc 0.5 sqm in each pane with EPDM rubber/ neoprene gasket etc complete as specified and directed. 95 S&F sheet glass 4.80 mm thick ordinary quality, ground or obscured or frosted, on one side etc complete as specified and directed. 96 S&F Mortice lock, brass 4 Lever vertical type, size 100 mm complete as specified and directed. 97 S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification& drawing complete as specified and directed. 98 S&F 100 mm longExtruded brass handles, fabricated type polished complete as specified and directed. 99 S&F 150 mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixedcomplete as specified and directed. 100 S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed 101 S&FSheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete as specified and directed. 102 S&F in repairs Corner Glass Shelf, Fancy Type complete as specified and directed. 103 S&F in repairs PVC body cabinet box mirror of size 350 mm x 450 mm x 100 mm in PTMT alloy of approved patterns and designs complete all as specified and as directed. 104 S&FVitreous China Soap dish, any type, fixed to plugs with chromium plated brass screws complete as specified and directed. 105 M&L for coloured designed chequered cement concrete tile of size 400x400x25mm thick withwhitecement & pigment in floorsetc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed of CM 1:6 complete all as specified and directed. 106 M&L for preparing of old chequered tile and Paver block surfaces/existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard Apex paint or equivalent of any colour complete all as specified and directed. 107 M&L Machine pressed precast concrete glossy finishinterlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laying ,set, jointed in neat cement slurry and pointed with grey cement mixed with pigment to match complete all as specified and directed. 108 M&L 40 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in flooring, complete all as specified and directed. 109 Waterproofing membrane :Providing and laying / fixing TPO (Thermoplastic polyolefin) membrane of non-flammable waterproofing of Roof on prepared surface of roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet. which shall be a 1.5mm thick loose laid membrane using Fosroc Proofex ORG (I) membrane or equivalent layers are overlapped to achieve a minimum weld of 110mm. Hot air welding can be done either hand applied or by means of automatic machines and the rolls either end are overlapped with 110mmin staggered position and the membrane shall be laid over the layers of nonwoven geotextile fiber or Asian Paint TPO or equivalent product ofM/S MCBauchemic /CIPY/SIKA/Pidilite Dr Fixit TPO membrane/Berger. The separation layer provided to preventthe mechanical abrasion andcushioning betweenthe Fosroc ProofexORG (I) membrane and the concrete substructure. The termination of Fosroc Proofex ORG (I) by aluminum strip anchoring.Notes: The work shall be carried out complete as per manufacturer"s specifications and application methodology. Execution to be done with authorized trained/skilled applicatorwith prior experience of more than 5 years in applying similar system and as permanufacturertechnical guidelines laid by manufacturer, Company back guarantee shall be given by contractor after completion of water proofing work before payment. 110 S&F Rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top ) hoisted and fixed in positionall as specified in Sch “A”of capacity 1000 liter, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 111 S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed. 112 S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed. 113 Supplying and laying of 32 mm dia CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and directed. 114 Supplying and laying of 25 mm dia CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and directed. 115 Supplying and laying of 20mm dia CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified 116 S&F 15 mm boreAngle cock fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. 117 S&F 15 mm fancy type long body Bib taps long shank cast copper alloy with crutch or butterfly handle secrwed for iron pipe or for brass ferrule complete all as specified and directed. 118 S&F 15 mm bore single lever Wash basin mixer without popup waste with 450 mm long braided hoses complete all as specified and directed. 119 S&F Brass CP mixerfancy type for mixing hot & cold water chromium plated screwed down high pressure withfor iron pipe with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 120 S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. 121 S&F Chromium pated shower rose 125 mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union complete all as specified and directed. 122 S&F Towel rail 20mm dia chromium plated including 600mm longincluding brackets, screws and wooden/plastic cleats complete all as specified and directed. 123 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 124 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. 125 S&FVitreous chinawash down water closet (Pedestal pattern, EWC), white including fixing bolts, 110mm PVC (SWR) "P’ trap, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 126 S&F Table topwash hand basin Vitreous china, light colour / white of size 565mmx420mmx140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length inlcluding making necessary connections complete all as specified and directed. 127 S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling, ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 128 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and directed. 129 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed. 130 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified and directed. 131 S&F PVC (SWR) floor trap 75mm dia outlet, plain/hole with grating including jointing with solvent cement complete all as specified and directed. 132 S&F PVC (SWR) bends any radius 110mmbore complete all as specified and directed. 133 S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed. 134 S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. 135 S&F PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and directed. 136 S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified and directed. 137 S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. 138 S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solventcement concrete complete all as specified and directed. 139 M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing on stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dollyfor mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly andcolour coding of cables such as Phase- Red, Neutral-Black, and Earth-Greenand making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for the following :-Note-Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduit and sunken boxes shall be included in quoted rate. No extra paymentshall be made for this. 140 One light point controlled by one single pole 5 Amps switch. 141 One ceiling fan point controlled by one single pole 5 Amps switch. 142 One exhaust fan point controlled by one single pole 5 Amps switch. 143 One 5 pin socket point 5 Amps on independent board. 144 One 5 pin socket point 5 Amps on same board with other switches. 145 M&L for concealed point wiring with 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing on stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dollyfor mounting of modular switches/ sockets/regulator etc and 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Greenand making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc for One 15 Amp switch socket combination on independent board complete all as specified & directed by Engineer-in-Charge. (Note-Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduit and sunken boxes shall be included in quoted rate. No extra paymentshall be made for this. 146 M&L for concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note- (i) Two runs of single core 2.5 sqmm cable and one run of 2.5 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduitfor sub main wiring shall be included in quoted rate. No extra payment will be made for this. 147 M&L for concealed sub main wiring with two single core 4 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note- Two runs of single core 4.00 sqmm cable and one run of 4.00 sqmm earth wire including PVC concealed Conduit together will be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduitfor sub main wiring shall beincluded in quoted rate. No extra payment will be made for this. 148 M&L for concealed sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etcwith 6.00 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note-Two runs of single core 6.00 sqmm cable and one run of 6.00 sqmm earth wire including PVC concealed Conduit together shall be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wallfor fixing of concealed conduitfor sub main wiring shall be included in quoted rate. No extra payment will be made for this. 149 ITEMS APPLICABLE FOR JOB "B" 150 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance complete all as specified & directed 151 M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layercomplete all as specified and directed. 152 S&F Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15 mm thick screed bedin cement mortar 1:6 complete all as specified and directed. 153 All as here-in-before but for skirting including 10 mm thick cement mortar as back coating 1:4 complete all as specified and directed. 154 Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in same opening after easing and adjusting complete all as specified and directed. 155 S&F 2nd class HW plain chowkhats and framed,rebated on the solidrounded or chamfered put together with glue pinned at joints complete all as specified and directed. 156 S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 157 S&F Factory made solid panel PVC doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including3 nos 100mm long Stainless steel butt hings andscrewsas per specification & drawing complete all as specified and directed. 158 S&F 75 mm Aluminium anodisebarrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. 159 S&F 200 mm Aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. 160 S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 161 S&F100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 162 S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 163 Dismantling structural steel work including doors, gates and similar works but excluding framed truss complete all as specified and directed. 164 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. 165 Dismantling wall ceilling board (fiber pulp insulation etc) or insulation boards/ slabs /blankets any thickness including cover fillets complete all as specified and directed. 166 S&F Gypsum Board 12 mm thick fixed with corrosion resistant self tapping zinc plated dry wall screws with counter sunk cross heads on snap grid in ceilings as per manufacturers instructions including anodised aluminium snap grid of size 605mm x 605mm using standard tee and angle sections such as Wall Angle of size 38 X 25 X 2.4 mm weighing 0.36 kg/rm,Main / Cross teesof size 36.5 X 25 X 1.4 mm weighing 0.24 kg/rm for false ceiling including cutting, drilling, jointing etc. complete including provision of 4 mm dia GI wire suspenders fixed with adjustable connectors at interval of not more than 600 mm centre to centre and applying two or more coats of Cement based Wall Care Putty of make JK / Birla / Jenson & Nicholson / Alltek on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of acrylic emulsion paint over one coat of primer complete all as specified and as directed. 167 S&F Factory made WPC single extruded 100% lead free ISO certified COMPANY of 18 mm thick pre laminated shutter for kitchen cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be 12 micron prelaminated side with different design another side plain white of density not less than 650 kg /cum manufactured by an ISO 9001:2015 certified company. The 18 mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. 168 S&F Stainless steel clip on auto closing panel concealed hinges thickness 15-22 mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed. 169 S&F 30 mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. 170 S&F Magnetic catches complete all as specified and as directed. 171 S&F 100 mm long Extruded brass handles, fabricated type polishedcomplete all as specified and as directed. 172 M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces inCement mortar 1:6,finished even and smooth with out using extra cementcomplete all as specified and as directed. 173 M&LRendering 10 mm thick on fair faces ofconcrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etcandfinished even and smooth without using extra cementcomplete all as specified and as directed. 174 M&L Coloured designed chequered cement concrete tiles of a size 300x300x25mm thick withwhitecement & pigment in floorswith 20 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 175 M&L Preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed. 176 M&L Preparing of of new wall surfaces with two coats of distemper oil emulsion white or tinted over primer over a coat of 3mm thick wall care putty, including preparation complete all as specified and as directed. 177 Complete removal of existing treatment of old surface of wall and preparation with 2 coats of distemper oil emulsion white or tinted through mechnical means over a coat of 1mm thick wall care putty,complete all as specified and as directed. 178 M&L Point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC Casing & CappingISI markedbroken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirementsincluding fixing on stone walls / brick masonary walls /ceilings /floors etcmodular MS sunken boxes with earth dollyfor mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cableas continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green.and making good to disturbed surfaces/wall with plaster& matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for the following :- 179 One light point controlled by one single pole 5 Amps switch. 180 One ceiling fan point controlled by one single pole 5 Amps switch. 181 One exhaust fan point controlled by one single pole 5 Amps switch. 182 One 5 pin socket point 5 Amps on same board with other switches. 183 All as per item No-179.00 here-in-before but for power point wiring with 2.5 SqmmPVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 SqmmPVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp modular switch socket outlet onindependent board complete all as specified and as directed. 184 All as per item No- 179.00 here-in-before but for power point wiring with 4.00 SqmmPVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 4.00 SqmmPVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp modular switch socket outlet onindependent board complete all as specified and as directed. 185 S&F Modular white cover plate with frame, 8 module complete all as specified and as directed. 186 S&F Modular metal flush box 8module complete all as specified and as directed. 187 S&F LED light fitting of size600 mm x 600 mm, 36 watt, white/warm white as per requirement220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed. 188 S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified and as directed. 189 S&F Sheet metal enclosure for DB"s double door TPN 04ways including 01 No MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V,complete all as specified and as directed. 190 S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and including drilling holes in any type wall fixing four nos anchor bolts five inch size,nuts and washer and connected to water pipe line with two nos hot and cold 600 mm long connection pipe and electric connection testing complete all as specified and as directed. 191 M&L for sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC Casing & CappingISI markedbroken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4.00 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and as directed. Note-Two runs of 4.00 sqmm single core cable and one run of4.00 sqmm earth wire includingPVCcasing & capping together shall be measured as one unit. 192 M&L for sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistrandedcopper conductor 1100 volts grade cable in and including heavy grade PVC Casing & CappingISI markedbroken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistrandedcopper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and as directed. Note-Two runs of 6.00 sqmm single core cable and one run of 6.00 sqmm earth wire including PVCcasing & capping together shall be measured as one unit. 193 ITEMS APPLICABLE FOR JOB "C" 194 S&F Mild steel screw bolts diameter of neck in 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm n exc 10cm long complete all as specified and as directed. 195 S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: Glass or wiremesh shall be meausred and paid separately. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 196 ITEMS APPLICABLE FOR JOB "D" 197 M&L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed. 198 Removing building materials etc.to a distance of 20.0 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. 199 ITEMS APPLICABLE FOR JOB "E" 200 S&F Factory Made 12 mm thick 100% Solid WPC (Wood polymer Composite) decorative Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade) Fixed to aPVC board with resin an the Panels shall be mounted on grid support system of 50 / 100mm M.S. (Hot Dip Galvanized-Minimum 100 microns) tubular section (or) Extruded Aluminium tube of 50x50x2mm including edge runners "L" shaped on stainless steel on top and bottom and stainless steel "T" profile runners for aesthetics as specified., Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardantcomplete all as specified and directed. Note : Colour and design shall be as directed by Engr-in-charge .Rate quoted shall be inclusive of any design and fittings 201 M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
|
