|
Tender For Repair To All Type Of Wooden Furniture Under Ge (East) Jalandhar Cantt; 1.00 "CHAIR DINNING (Drg No. FD- 228 & 279) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified." 760 Each 1.01 Ditto all as per srl item No 1.00 above but rear leg 760 Each 1.02 Ditto all as per srl item No 1.00 above but side/back/front rail of seat 1120 Each 1.03 Ditto all as per srl item No 1.00 above but stiffener of back 798 Each 1.04 Ditto all as per srl item No 1.00 above but stiffener to legs short/long 798 Each 1.05 Material & labour for caning of chair with 2mm wide plastic white/cream colour cane in Godrej pattern all as shown in drawing and as specified including taking down old unserviceable cane . 1660 Each 1.06 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 1660 Each 2.00 "CHAIR EASY (Drg No. FD-223 & 229) Taking out old unserviceable leg and supply & fixing the front leg of first class hard wood (sheesham wood) made to shape, Joints fixed with bamboo pins and fevicol by making Tenon/Groove Joint of size and section as specified and shown in drg wrought on all sides as directed by Engineer-in-Charge. " 240 Each 2.01 Ditto all as per srl item No No 2.00 above but rear leg 240 Each 2.02 Ditto all as per srl item No 2.00 above but stiffener 300 Each 2.03 Ditto all as per srl item No 2.00 above but arms 296 Each 2.04 Material and labour for canning of chair with 2mm plastic white /cream cane in Godrej pattern as shown and as specified and all as directed. 620 Each 2.05 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 620 Each 3.00 "CHAIR WRITING (Drg No. FD-250 & 280) Taking out old unserviceable front leg and supply and fixing new front leg made of first class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, and as directed by Engineer-in-Charge. " 212 Each 3.01 Ditto all as per srl item No 3.00 above but rear leg 182 Each 3.02 Ditto all as per srl item No 3.00 above but front/ side/back rail all as specified and directed. 136 Each 3.03 Ditto all as per srl item No 3.00 above but back stiffener. 210 Each 3.04 Ditto all as per srl item No 3.00 above but arms 180 Each 3.05 Material & labour for caning of chair with 2mm wide plastic white/ cream colour cane in Godrej pattern all as shown in drawing and as specified including taking down old unserviceable cane. 380 Each 3.06 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 380 Each 4.00 "CHAIR WB Taking out old unserviceable front leg and supply and fixing new front leg made of first class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, and as directed by Engineer-in-Charge. " 210 Each 4.01 Ditto all as per srl item No 4.00 above but rear leg 210 Each 4.02 Ditto all as per srl item No 4.00 above but front/ side/back all as specified and directed. 220 Each 4.03 All as per srl item No 4.00 above but seat of plywood 6mm thick commercial ply duly perforated as shown on drg and fixed with steel screw and as directed 260 Each 4.04 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 260 Each 5.00 "CHAIR DINING CUSHIONED (Drg No. FD/E6/MAP-II/02) Material and labour in replacement of the following components of chair dining offrs without disturbing the other component including tightening of frame all as specified and shown on drg. The work will be executed either at site of at BSO furniture yard to avoid the loos of manpower and transportation." 5.01 Removing of existing old worn out/ unserviceable rexin cover from seat of chair dining cushioned and providing new rexin cover fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair 220 Each 5.02 "Removing of existing old worn out/ unserviceable foam from seat of chair dining cushioned and providing new polyurethane foam cushion 75mm thick, 40 density and fabric fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair. Make of foam : Sleep Well/ Kurlon/ Sweet Dream" 220 Each 5.03 Ditto all as per srl item No 5.02 above but rear leg 176 Each 5.04 Ditto all as per srl item No 5.02 above but front/ side/back rail of seat all as specified and directed. 170 Each 5.05 Ditto all as per srl item No 5.02 above but stiffener of back all as specified and directed. 180 Each 5.06 Ditto as per srl item No 5.02 above but stiffener to legs short/ long all as specified and directed. 180 Each 5.07 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 240 Each 6.00 "TABLE WRITING (Drg No. FD-249 & 1116) Material and labour for providing table top of size 1200mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge." 110 Each 6.01 Ditto all as per srl item No. 6.00 above but leg of sheesham wood complete. 80 Each 6.02 Ditto all as per srl item No. 6.00 above but side rail of sheesham wood complete 90 Each 6.03 Ditto all as per srl item No. 6.00 above but stiffener of Sheesham wood complete. 80 Each 6.04 Ditto all as per srl item No. 6.00 above but side box with drawer 78 Each 6.05 Ditto all as per srl item No. 6.00 above SS lock 40 Each 6.06 Ditto all as per srl item No. 6.00 above Knob for drawer 160 Each 6.07 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 110 Each 7.00 "TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg No. FD-284) Material and labour for providing leg of sheesham wood of table 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. " 90 Each 7.01 Ditto all as per srl item No. 7.00 above but front rail of sheesham wood complete. 90 Each 7.02 Ditto all as per srl item No. 7.00 above but side rail of sheesham wood complete. 110 Each 7.03 Ditto all as per srl item No. 7.00 above but stiffener of sheesham wood complete. 70 Each 7.04 All as per srl item No. 7.00 here-in-before but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete. 220 Each 7.05 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 220 Each 8.00 "TABLE DINNING FOR 6 PERSONS (Drg No. FD-273 & 1115) Material and Labour for providing table top of size 1500mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge" 100 Each 8.01 Ditto all as per srl item No. 8.00 above but leg of Sheesham wood complete 40 Each 8.02 Ditto all as per srl item No. 8.00 above but front or rear rail of sheesham wood complete. 36 Each 8.03 Ditto all as per srl item No. 8.00 above but side rail of sheesham wood complete. 36 Each 8.04 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 98 Each 9.00 "TABLE 900MM X 600MM X 760MM WITH DRAWERS (Drg No. FD-224 & 283) Material and labour for providing leg of Sheesham wood complete of table size 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge." 60 Each 9.01 Ditto all as per srl item No. 9.00 above but front rail of sheesham wood complete. 32 Each 9.02 Ditto all as per srl item No. 9.00 above but side rail of sheesham wood complete 32 Each 9.03 Ditto all as per srl item No. 9.00 above but stiffener of sheesham wood complete 30 Each 9.04 Ditto all as per srl item No. 9.00 above but drawer of 6mm plywood complete 36 Each 9.05 "Ditto all as per srl item No. 9.00 above but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete. Make : Novapan" 130 Each 9.06 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 130 Each 10.00 "TABLE DINNING FOR EIGHT PERSONS (Drg No. FD-239 & 1115) Material and labour for providing Table top of size 1800mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge. " 32 Each 10.01 Ditto all as per srl item No. 10.00 here-in-before leg of Sheesham wood complete 12 Each 10.02 Ditto all as per srl item No. 10.00 here-in-before but front or rear rail of sheesham wood complete. 18 Each 10.03 Ditto all as per srl item No. 10.00 here-in-before but side rail of sheesham wood complete. 18 Each 10.04 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 32 Each 11.00 "TEAPOY (Drg No. FD-278 & 232) Material and labour for providing Front or Rear leg of first class hard wood (sheesham wood) complete of Teapoy dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge." 60 Each 11.01 Ditto all as per srl item No. 11.00 above but front or Rear rail of sheesham wood complete. 48 Each 11.02 Ditto all as per srl item No. 11.00 above but side rail of sheesham wood complete. 52 Each 11.03 Ditto all as per srl item No. 11.00 above but top of size 600mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete. 190 Each 11.04 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 190 Each 12.00 "TABLE PEG (Drg No. FD-277 & 236) Material and labour for providing Leg of Sheesham wood complete of Table Peg and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge." 140 Each 12.01 Ditto all as per srl item No. 12.00 above but front/back/side rail of sheesham wood complete. 110 Each 12.02 Ditto all as per srl item No. 12.00 above but table Top of size 450mm x 300mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete 380 Each 12.03 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 380 Each 13.00 "TABLE CENTRE (Drg No. FD-235 & 274) Material and labour for providing front or Rear leg of Sheesham wood complete of Table Centre and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge" 78 Each 13.01 Ditto all as per srl item No. 13.00 above but front or rear or side rail of sheesham wood complete . 98 Each 13.02 Table Top of size 900mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete. 160 Each 13.03 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 160 Each 14.00 "TABLE BED SIDE FD/E-6/MAP/15(R) Material and labour in repair of the following part without disturbing the other component including tightening of frame all as per existing and directed" 14.01 Supply and fixing shelves made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification 130 Each 14.02 Supply and fixing sides made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification 130 Each 14.03 Supply and fixing 18mm MS Sq front leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg 220 Each 14.04 Supply and fixing 18mm MS Sq rear leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg 220 Each 14.05 Supply and fixing 6mm thick commercial ply BWR for back side all as per existing 100 Each 14.06 Supply and fixing heavy duty channels to drawers as per existing and as directed 320 Each 14.07 Supply and fixing CP handle to drawers as per existing and as directed 220 Each 14.08 Supply and fixing top made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification 100 Each 14.09 Removing of unserviceable shoes and supply & fixing new rubber shoes as approved 520 Each 15.00 "SIDE BOARD (Drg No. FD- 112, 241, 371 & 1112) Material and labour for replacement of unserviceable broken top of side board of thickness 18/19mm pre laminated particle board exterior grade Including taking out the old part from the items as specified and directed by the Engineer-in-Charge." 34 Each 15.01 Ditto all as per srl item No 15.00 above but shutter Door of 18/19mm thick pre laminated particle board exterior grade, Fixed with 4mm thick TW beading all round. Including taking out the old part from the item as specified and directed by the Engineer-in-Charge 34 Each 15.02 Ditto all as per srl item No 15.00 above but shelf of 18/19mm thick prelaminated particle board exterior grade 40 Each 15.03 Material and labour for repairing /replacement of Drawer made out of 18/19mm plywood & prelaminated particle board exterior grade alongwith fancy Knob as exists and as specified and directed by the Engineer-in-Charge. 56 Each 15.04 Material and labour for fixing of 4 mm teak wood beading in front of side board as required and shown on drgs 42 Each 15.05 Material and labour for repairing /replacement of Ply wood 6mm thick fixed at rear portion of the side board complete all as specified and directed by the Engineer-in-Charge. 45 Each 15.06 Material and labour for replacement of unserviceable long rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by the Engineer-in-Charge. 26 Each 15.07 Ditto all as per srl item No 15.06 above but short rail. 16 Each 15.08 Ditto all as per srl item No 15.06 above but leg of side board 32 Each 15.09 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 50 Each 16.00 "BOOK CASE (Drg No. FD - 237) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm up to 40mm from top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 100mm high fixed together with 25mmx40mm in section Teak wood Rails in short and long sides including taking out the old/UNSV parts from Book case as shown on drawing and as directed by Engineer-in-Charge" 40 Each 16.01 Ditto all as per srl item No 16.00 above but top made out of 19mm thick Block Board Commercial with 1 mm thick pre-laminated sheet fixed over it with the help of Fevicol. 38 Each 16.02 Ditto all as per srl item No 16.00 above but shelf in Book case in the left side shall be 380mm wide and 12mm thick Teak Veneer shade particle board exterior grade one side and commercial other side as shown on drawing. 34 Each 16.03 Ditto all as per srl item No 16.00 above but Shelves on the other side of Book Case made out of 12mm thick Teak Veneer shade Particle Board on one side and other side commercial exterior grade as shown on drawing. 30 Each 16.04 Ditto all as per srl item No 16.00 above but shutter of book case made out of 19mm thick particle Board Teak Veneer surface on one side and commercial on other side exterior grade fixed to side of Book Case with help of Piano type hinged including one chromium plated knob and ball spring catch fixed to the shutters all other shown on drawing. 70 Each 16.05 Ditto all as per srl item No 16.00 above but Back of Book case shall be made out of 6mm thick Ply wood commercial grade and fixed with head less Nails. 26 Each 16.06 Ditto all as per srl item No 16.00 above but all front edges of particle board all around the shutters of book case shall have 3mm thick teak wood edging of width equal to thickness of particle board complete all as specified and directed. 26 Each 16.07 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 50 Each 17.00 "TABLE DRESSING LADIES (Drg No. FD-251) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm in section at top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 150mm high & shall be joined together with 40mm x25mm in section stiffeners in long and short sides joining legs at top including taking out the old/UNSV parts from Table dressing ladies as shown on drawing and as directed by Engineer-in-Charge." 60 Each 17.01 All as per srl item No 17.00 here-in-before but two drawers made out of 12mm thick plywood BWR of size 310mmx130mmx320mm depth including fixing of Two Nos Knob to drawers complete all as specified and directed. 60 Each 17.02 All as per srl item No 17.00 here-in-before but Two Nos of Glass Shutters 5.00mm fixed alongwith two way aluminium channel of required thickness a space of 550mm on left hand side of table dressing ladies as specified and directed by the Engineer-in-Charge. 36 Each 17.03 Ditto all as per srl item No 17.00 here-in-before but top made out of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet teak face sheet shall be fixed as shown on drawing. 40 Each 17.04 Ditto all as per srl item No 17.00 here-in-before but Back made out of 12mm thick particle board with commercial ply wood on both side exterior grade all as shown on drawing. 40 Each 17.05 Ditto all as per srl item No 17.00 here-in-before but Teak wood vertical support out of 45mmx45mm shall be provided to back of mirror as shown on drawing. 32 Each 17.06 Ditto all as per srl item No 17.00 here-in-before but Supply and fixing of Looking Mirror 5.00mm thick 355mmx1220mm free from all defects, distorted images etc as shown on drawing. 90 Each 17.07 Ditto all as per srl item No 17.00 here-in-before but Replacement of 6mm thick commercial plywood backing of mirror. 45 Each 17.08 Material and labour for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed. 90 Each 18.00 "TABLE DRESSING GENTS (Drg No. FD-230) Material and labour for box of table dressing gents made out of pre laminated particle board 19mm thick with veneer face as shown on drawing over all size of box shall be 900mm long 300mm wide and 150mm high over which 20x40mm thick teak wood beading shall be fixed including taking out the old/UNSV parts from Table dressing gents as shown on drawing and as directed by Engineer-in-Charge" 90 Each 18.01 All as per srl item No 18.00 above but two drawers equally spaced having 255mm in the middle . Front drawer of 12mm thick pre-laminated particle board teak veneer face sides of the drawer shall be of 12mm thick teak plank running smoothly in the drawer .The bottom and back of drawers shall be 6mm thick ply wood commercial front face of shelves shall have 3mm thick teak wood edging as shown on drawing . 90 Each 18.02 Ditto all as per srl item No 18.00 above but two Nos of Knob shall be fixed to drawers 190 Each 18.03 All as per srl item No 18.00 above but supply & fixing of looking mirror of size 410mm wide and 790 mm high 5mm thick along with wooden frame of size 25x20mm thick made to the shape as specified and directed by the Engineer-in-Charge free from distortion and other defects. 138 Each 18.04 Ditto all as per srl item No 18.00 above but fixing of two supports of 25mm x 35mm x 1115mm teakwood batten on the back side of the mirror as shown on drg 120 Each 18.05 Ditto all as per srl item No 18.00 here-in-before but fixing the 6mm thick plywood backing of mirror as specified and shown on drgs. 138 Each 18.06 Ditto all as per srl item No 18.00 here-in-before but replacement of 3mm thick flat iron key plate of mild steel 25mmx25mmin section provided at top of mirror as directed by Engineer-in-Charge and painted with black paint. 138 Each 18.07 Material and labour for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed. 130 Each 19.00 "TABLE COMPUTER (DRG NO FD/E6/MAP/03) Material and labour for replacement of the following parts without disturbing the other components including tightening of frame complete all as specified, shown on drg and directed" 19.01 Replacement of top of table computer of PLPB of size 900 x 600 x 18mm thick exterior grade with edges finished with 1.5mm thick PVC beading 60 Each 19.02 Replacement of key board tray with sliding channel as per existing pattern 80 Each 19.03 Replacement of drawer with sliding channel as per existing pattern 80 Each 19.04 Replacement of adjustable nylon buffer as per existing pattern 160 Each 19.05 M&L for removing old u/s particle boards from side,Foot board,CPU stand of Table Computer,S&F new particle board as exists and as directed by Engr-in-charge 160 Each 20.00 "HATSTAND WITH MIRROR (FD-233, 361, 362) Material and labour in replacement of the following components of hatstand with mirror complete all as specified and directed. The work will be executed either at site or at BSO furniture yard to avoid the loss of manpower and transportation." 20.01 Removing of existing old unserviceable broken mirror and supply & fixing new mirror as per drawing and as directed by Engineer-in-Charge. 40 Each 20.02 Removing old broken/unserviceable base board of hatstand, supply and fixing of new block board 18mm complete as per existing & as directed by Engineer-in-Charge. 32 Each 20.03 Removing old/unserviceable peg set of hatstand, supply and fixing of new peg set complete as per existing & as directed by Engineer-in-Charge. 160 Each 20.04 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 60 Each 21.00 "STOOL DRESSING LADIES (FD/E6/MAP/14) Material and labour in replacement of the following components of stool dressing complete all as specified and directed by Engineer-in-Charge" 21.01 Removing existing broken/unserviceable leg of stool dressing and providing and fixing new leg of sheesham wood complete all as specified and directed by Engineer-in-Charge 48 Each 21.02 Supply and fixing front/back/side rail of sheesham wood all as per existing and as directed by Engineer-in-Charge. 90 Each 21.03 Supply and fixing stool top of size 450mm x 450mm/ existing size made out of 12mm thick ply board exterior grade ISI marked and as directed by Engineer-in-Charge 50 Each 21.04 Supply and fixing new cushion seat for stool dressing of existing tapestry cloth for seat of stool dressing (cost not less than Rs. 200/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The seat cushion shall be fixed on existing wooden frame after replacement as Cushion and tapestry cloth all as existing and directed 52 Each 21.05 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 76 Each 22.00 "BIN LINEN MULTIPURPOSE (Drg No. FD/E6/MAP/09) Material and labour in replacement of the following parts without disturbing the other component including tightining of frame complete all as specified and shown on drgs" 22.01 "Supply and fixing top made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro" 32 Each 22.02 "Supply and fixing bottom made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro" 32 Each 22.03 "Supply and fixing 18/19mm thick pre-laminated particle board on left/ right side as per existing shape & size Make of Board : Navapan/ Century/ Duro" 32 Each 22.04 "Supply and fixing shutter made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro" 40 Each 22.05 "Supply and fixing shelf made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro" 30 Each 22.06 "Supply and fixing 12mm thick commercial ply as in back as per existing shape & size Make of ply : Kitply/ Greenply/ Century/ Duro" 30 Each 22.07 Replacement of drawer with sliding channel all as per existing pattern 60 Each 22.08 Supply and fixing in replacement 50mm handle as per existing shape & size 60 Each 22.09 Supply and fixing stiffener made out of 1st class hard wood as per existing shape & size 40 Each 22.10 Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed 60 Each
|
