|
Safety Apron Made Of Scrape, Scrape Strips And Metal Buckles In The Neck And Waist For Adjustments., Safety Hood Made Of Helanca, Arabic Model With Flap, Front Closure. Of Energy On The Sole, With Slip Resistance And Fuel Oil Resistance., Basic Occupational Footwear, Botine Model, Consisting Of Leather, Type B Leather Design, Closure In Tie With Synthetic Laminate Collar With Inner Foam. Strobel System With Assembly Insole And Non -Tissue And Direct Injection Of The Sole On The Leather. Fully Closed Heel Region, With Slip Resistance, Bidensity Sole., Occupational Footwear For Professional Boot Type, Elastic Closure, Made Of Chrome Tanned Leather, Region Of Back In Textile Material, Non -Tissue Gas, Fabric Lining, Synthetic Material Assembled By Strobel System, Removable Internal Insole, Plastic Bundle For Conformation, Polyurethane Bidensity Injected Directly Into The Slip With Slip Resistance, Power Absorption System In The Jump And Fuel Oil Resistant., 01/08/2025, Safety Cover Made Of Pvc Coated Polyester Mesh (Vinyl Polychloride) With Hooded, Long Sleeves And Plastic Button Closure. Hull Injected Into High Density Polyethylene. The Hull Has The Inverted Option And Is Approved For High Temperature (At) And Low Temperature (Bt). The Hull Has Side Slits Called Slot For Accessory Coupling (Noise Mufflers And Facial Protectors). The Hull May Or May Not Have A Reflective Range. The Hull Can Be Supplied With Or Without Recording. The Helmet Is Coupled With The Minas Gerais Kit Composite Support For Lantern Coupling On The Front Of The Hull, Fixed By Screws, And Strap Fixed By Rivet On The Rear To Pass The Battery Wire. The Helmet Can Be Used With 3 (Three) Different Types Of Suspension: Push-Key, Fas-Trac Iii And Fas-Trac Force With Queixeira. The Hooves Can Be Supplied In Yellow, Mango, Blue, Navy, Pastel, Beige, White, Gray, Aluminum, Orange, Orange Cvrd, Cacao, Dark Brown, Black, Pink, Pink, Green, Green And Red And Red. The Safety Helmet Can Be Supplied With Or Without Jugular., Type I Safety Helmet, Class And, Without Ventilation, With Front Flap Hull, Molded In High Density Polyethylene, Optional Use Of Inverted Hull. Suspension With Four Or Six Fixing Points, Made With Two Or Three Strips Of Fabric, High Density Polyethylene Ram, With Adjustment “Easy Adjustment”, “Turnstile” Or “Second” Models. It Has Removable, Washable And Replaceable Sweat Absorption Strip Fixed To The Ram. The Hull Has Two Side Slits And Can Accommodate Stuffy And Visuals. The Helmet Has The Option Of Using A Jugular Strip Coupled With The Hull Through Two Or Three Holes In Elastic Or Fabric Versions. The Hull Has The Reflective Strip Option, Logo Printing, Lantern / Lamp Holder And Service Life Indicator.
|
