The Work Of Business Plan Against Sanction Packages Under Edd-1 Agra.- 1 Carriage Of Foll...

Contract Award Notice

Work Detail

The Work Of Business Plan Against Sanction Packages Under Edd-1 Agra.- 1 Carriage Of Following From 132 Kv Taj Agra To Work Related 33 / 11 Kv S / S Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. ( Distance 00-50Kms. ) A ) Pcc Pole 8.5 Mtr. Long 2 Carriage Of Following From 132 Kv Taj Agra To Site Of Work Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. ( Distance 00-50Kms. ) B ) 250 Kva T / F 3 Carriage Of Following From 132 Kv Taj Agra To Site Of Work Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. ( Distance 00-50Kms. ) C ) 16 / 25 Kva T / F 4 Carriage Of Following From 132 Kv Taj Agra To Work Related 33 / 11 Kv S / S Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. ( Distance 00-50Kms. ) D ) Line Material Viz. Aerial Bunch Conductor / Weasal Conductor / Dog, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps And Other Line Material, As Required 5 Cutting Of Kharanja / Mettalic Road / Concrete Portion While Digging Pit For Erection Of Pcc / Stp Poles, Stays Rod And Giving The Exact Shape After Exicution Work As Per Direction Of Supervising Engineer. It Includes The Cost Of Labour, T & P, Carrier Etc Reauired For Proper Completion Of Work. 6 Erection And Grouting Of Single Pole Of 8.5 Mtr. Long Pcc Poles In 1:2:4 ( Cement Sand, And Bricks Blast ) , Including Fixing Ofaccessories For Ht / Lt Line As Per Respo Manual. 7 Erection And Grouting Of Stays As Per Respo Manual 8 Fixing Of Earthing Rod As Per Respo Manual. 9 Dismentaling Of Exisinting Damaged 8.5 Mtr. Long Pcc Poles Including Opening Of All L.T. / H.T. Accessories As Per Site Conditions Under The Supervision Of Engineer Incharge. 10 Laying Sagging Stringing And Binding And Jumpering Etc Of Following Conductor As Per Respo Manual ( A ) Acsr Weasal Conductor 11 Laying Sagging Stringing And Binding And Jumpering Etc Of Following Conductor As Per Respo Manual :- ( B ) Acsr Dog / Racoon Conductor 12 Laying Sagging Stringing And Binding And Jumpering Etc Of Following Conductor As Per Respo Manual :- ( C ) Ab Conductor 3X50 Mm 13 Laying Sagging Stringing And Binding And Jumpering Etc Of Following Conductor As Per Respo Manual :- ( E ) Ab Conductor 3X120 Mm 14 Re- Sagging And Stringing Ofacsr Weasel Conductor In 11Kv / / Lt Line As Per Direction Of Supervising Engineer Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. 15 Removal Of Following Damaged / Existing Conductor From Existing Line Including Opening Of Jumpers Etc And Making Bundling N Stacking. A ) Acsr Weasal Conductor 16 Fencing Of250 / 400 Kva T / Fs:- Fabrication Of 50X50x6 Mm Size Ms Angle Frame Of Size 3000X2400mm With 450 Mm Long Angle For Grouting The Frame And Fixing Of 2"X1.5", 10 Swg Welded Wire Mesh With Ms Strip Of 24X5mm Size All Round The Frame And Drilling 9 Mm Holes Insides Of Frames At As Distance Of 300Mm For Jointing Of Frame With The Help Of Boslts And Nuts Including Cost Of Material. The Width Of Panal May Vary As Per Site Conditions, Grouting And Fixing Of Angle Iron Frames In Ratio 1:2:4 ( Cement, Coarse Sand And Stone Ballast ) In The Pocket Of 150X150x150mm All Round The Plinth And Bolting Of Frames With 25X8 Mm Size Bolts And Nuts, Making Main Gate In Front Of The Plinth Of Size 3000X2400 Mm By Making Two Leaves Of Size 3000X1200mm Size And Groutingthe Same In Ratio And Method Mentioned At Item ( B ) Above Fixing With Hinges With Dandlas For Locking System &Painting Of Entire Wire Mesh Angle Iron Etc. With Bus Green Super Enamelled Pain In Two Coats On The Primer Two Coatsof Redoxide. 17 Earthing Of 250 / 400 Kva Distribution Transformer By Maintenance Free Earthing Electrods ( Chemical ) By Digging Pits 6" Dia 3Mtr. Deep Including Inserting Pipe In Pipe Technology Concept Involve Two Mild Steel Pipes One Inserted Inside The Other Of Size ;-1. Inner Pip Dia Meter 50 Mm.2. Outer Pipe Dia Meter 100 Mm. Length Of The Both Pipeshall Be 3000 Mm. The M.S.Pipe Shall Be Isi Mark Of Class B As Per Is 1239. Thickness Of The Pipe Shall Be 12 Swg. The Empty Space In The Pipe Shall Be Filled With The Specially Developed Crystalline Material Conductiv Mixture Such As Copper And Aluminimum Powder.Conductive Carbon And Bonding Material Etc. Mixed In Diffrentproportions. Conductive Mixture Contents Shall Be 70 % Carbon Powder & 30% Metal Powder Preferably Pure Copper Or Aluminum Material Along With The Required Quantity Of Bonding Materials. Granule Size Of The Carbon & Metal Powder Shall Be 100 Mesh. The Mixture If Forced ( Pressurized ) Inside The Earth Electrode In Empty Space Of Inner Pipe & In Empty Space Between The Inner & Outer Pipe Of The Earth Electrode, In Paste Form And After Soldification Of The Same The Bottom End Cap As Well As Top End Cap Is Provided. The Mixture Shall Be Pressed By Machine In The Pipe. Precaution Shall Be Taken Has To Have No Air Gap Inside The Pipe While Pressing.The Back Fill Compound ( Earth Enhancment Material ) Shall Be Superior Conductive Material That Improvesearthing Effectiveness Especially In Areas Of Poor Conductivity Such As Rocky Ground, Sandy Soil & Areas Of Moisture Varation. It May Contain Conductive Cement ( 20% ) Graphite Carbon Powder ( 50% ) , Hydrous Aluminum Siliacate ( 10% ) , Sodium Montmorillonite ( 20% ) Etc. It Shall Be Placed Around Earth Electrode In The Earth Pit To Improve The Conductive Of Earth Electrode & Ground Contact Area. Mild Steel Electro Galavanizedflat 50X6 Mm Shall Welded To Earth Electrode Pips & Connected With Trasnformer Neutral And Body As Below With The Hlep Of Steel Nut & Boltor Through Welding As Per Requirment Of Site, To Gi Pipe And Filling Of Chemical Mixutre Around The Gi Pipe Upto 3 Mtr. Including Making Of Chamber & Connecting The Top Of The Inserted Pipe With Transformer Body& Neutral Through M.S.Flat 50X6mm With The Help Of Nut & Bolt Or Through Welding And Making A Main Hole Of Size 2"×2" And Covering The Same By A Stone Pad For The Purpose Of Poring Water For Moisture. 18 Installation Of250 Kva T / F On Plinth In Proper Alignment And Direction & Making Ht / Lt Connection. Providing "L" Type Alminium Bus Bar And Suitable Size Alminium Lugs 19 Installation Of Following T / F On Newly Erected Double Pole & Making Ht / Lt Connection.C ) 16 / 25 Kva T / F 20 Removal Of 100 Kva T / F Fromexisting Double Pole After Opening Ht / Lt Connections And Their Cariage To 132 Kv Taj Store Agra Including Loading And Unloading At Both End. 21 Fixing Of Lt Dustribution Boxes On Already Errected Pole For Giving Supply To Consumer By Connecting Consumer Cables By Using Appropriated Alumunium Lugs Tape N & B Provided By Conractor As Per Requirement.

Key Dates

Contact Information