|
Supply Gym Equipments For Sindhudurg District-1 MULTI GYM UNITS
2 7 STATION MULTY GYM UNIT\n\nCHEST PRESS CUM SHOULDER PRESS - 75 Kg LATPULL DOWN-75 Kg\n\nSINGLE HAND PULLEY-50 Kg INCLINE LEG PRESS-90 Kg\nLEG RAISER WITH DIPPING\n\n ABDOMEN BOARD\nTWISTER\n
3 6 STATION MULTY GYM UNIT\n\nCHEST PRESS CUM SHOULDER PRESS - 75 Kg\n LATPULL DOWN-75 Kg\n\nSINGLE HAND PULLEY - 50 Kg\n\nLEG CURL & LEG EXTENSION - 70 Kg\n\nLEG RAISER WITH DIPPING\n ABDOMEN BOARD\n
4 5 STATION MULTY GYM UNIT\n\nCHEST PRESS CUM SHOULDER PRESS - 75 Kg \nLATPULL DOWN-75 Kg\n\nLEG CURL & LEG EXTENSION - 70 Kg\n\nLEG RAISER WITH DIPPING \nTWISTER\n
5 SINGLE STATION GYM UNIT
6 WRIST CONDITIONER
7 PREACHER CURL MACHINE
8 LAT PULL DOWN
9 ROWING PULLEY
10 CHEST PRESS
11 MULTI FUNCTIONAL TRAINER
12 PEC FLY WITH REAR DELT
13 SHOULDER PRESS
14 STANDING CALF MACHINE
15 INCLINE LEG PRESS
16 LEG EXTENSION AND LEG CURL COMBO
17 HACK MACHINE
18 MULTI HIP
19 ABDOMEN CRUNCH
20 ASSISTED CHIN-UP
21 HYPER EXTENSION
22 BENT OVER ROWER (T BAR]
23 BENCH PRESS BENCH
24 INCLINE BENCH
25 DECLINE BENCH
26 ADJUSTABLE BENCH
27 DUAL AXIS INCLINE PRESS
28 DUAL AXIS BENCH PRESS
29 DUAL AXIS DECLINE PRESS
30 45 DEGREE LEG PRESS
31 ABDOMEN BENCH
32 VERTICAL KNEE RAISER
33 TWISTER
34 3-DIMENSIONAL SMITH MACHINE
35 PUSHUP STAND
36 PLAIN BENCH
37 SMITH BENCH
38 RACK FOR 20 DUMBELLS WITH BAR RACK
39 ARC DUMBELL RACK
40 WEIGHT PLATE TREE RACK
41 ABDOMEN BOARD WITH LADDER
42 DOUBLE TWISTER
43 SEATED CALF BENCH
44 FREE-WEIGHT STATION GYM UNIT
45 Shoulder Press (Free Weight):\nDimensions: (L X W X H) 1300X1260X1350mm.\nMain Frame: ?114x3 mm thick M.S pipe and subordinate tube is of ?88x3.0 large thickness M.S pipe.\nHandle: is made of ?88 x3 mm thick Pipe and ?25 mm round M.S bright bar in bending design.\nAll remaining frame is made by ?88x3mm thick MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade6305 '2RS'steel ball bearing.\nBase plate: is OD166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes: ?75mm OD seamless pipe.\nWeight plate mounting pipe is of 048 mm MS pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nSeat Frame: made up of hard chrome plated mild steel 048 DIA round pipe.\nHardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.\nHand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: are of PP/NYLON/HDPE material.\nLaser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mmthick mild steel plate.\n
46 Front Pull Down (Free Weight):\nDimensions: (L X W X H) 1230X1120X1860mm.\nMain Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3.0 large thickness M.S pipe. Handle frame shall be made using bending design.\nHandle: is made of ?88x3 mm thick Pipe and ?25 mm round M.S bright bar in bending.\nAll remaining frame is made by 088 x3mm thick MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 '2RS‘ steel ball bearing.\nBase plate Base plate is OD 166, ID 116, and 6 mm thick.\nPins: Made up of M.S bright bar.\nBearing bushes:- ?75mm OD seamless pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nFoam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.\nHardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.\nHand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: Mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYLON/HDPE material.\nLaser cutting: Laser cutting profiles of 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\n\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate\n
47 Seated Dip (Free Weight): \nDimensions: (L X W X H) 1750X1010X890mm.\nMain Frame :?114 x3mm thick M.S pipe made in bending design and subordinate tube is of ?88x3mm thickness M.S pipe. Handle and plate holder frame, bottom frame and front are made in bending design by using ?88x3mm thickness M.S pipe.\nHandle: is made of ?88 x3 mm thick Pipe and ?25 mm round M.S bright bar in bending design.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 '2RS' steel ball bearing.\nBase plates OD 166, ID 116, and 6 mm thick And OD 130,1077, 6mm thick M.S round laser cut profile.\nPins: are made up of M.S bright bar.\nBearing bushes: ?75mm OD seamless pipe.\nWeight plate mounting pipe is of ?48 mm MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nFoam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.\nHardware All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material.\nLaser cutting: Profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
48 Preacher Curl (Free Weight):\nDimensions: (LX W X H) 1210X1360X14B0mm.\nMain Frame:?88 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe in bending design.\nHandle: Handle is made of ?88 x3 mm thick M.S pipe duly bending design and ?25 mm round M.S bright bar.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring QD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 '2RS' steel bail bearing. \nBase plate: Base plate is OD130, ID 90, and 6 mm thick. \nPins: are made up of M.S bright bar.\nBearing bushes: ?75mm OD seamless pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nHardware : All hardware's uses button heads bolts and nuts made up of high tensile steel. \nCables; 6mm thick nylon coated cables with aluminum crimping at one end to attach and hold handle. One additional cable set to be supplied.\nHand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps : All open ends should dose using closing caps of PP/NYLON/HDPE material.\n Laser cutting: profiles of 8mm, 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate\n
49 Row (Free Weight):\nDimensions: (L X W X H) 1375X1570X1530mm.\nMain Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Handle main and base frame, bottom frame are made in bending design using of ?88x3mm thick M.S pipe.\nHandle: is made of ?88 x3 mm thick Pipe bending design and ?25 mm round M.S bright bar.\nAll remaining frame is made by ? 88 x3mm thick MS pipe.\nWeight plates: Rubberized = moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 ^RS' steel ball bearing.\nBase plate :is 00166,10 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes : ? 75mm OD seamless pipe.\nWeight plate mounting pipe is of 048 mm MS pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nHardware : All hardware's uses button heads bolts and nuts made up of high tensile steel.\nHand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long,endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps-.All open ends should close using closing caps of PP/NYLON/HDPE material.\nLaser cutting: profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
50 Calf Raise (Free Weight):\nDimensions: (t X W X H) 1470X735X92Smm.\nMain Frame: ?114x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Bottom frame, seat frame, thighs locking frame are made in bending design ?88x3mm M.S. Pipe\nAll remaining frame is made by ?88 x3mm thickness M.S Pipe.\nFoot Rest: foot rest Is made using heavy duty 100 x 50 x 2.5mm thick capsule tube.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder, is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 ‘2RS1 steel ball bearing.\nBase plate : is OD 166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes : ? 75mm OD seamless pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nHardware All hardware's uses button heads bolts and nuts made up of high tensile steel. \nHand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYION/HDPE material.\nLaser cutting: profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.\nPowders Coating: All components are chemically treated to seat exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
51 Kneeling Leg Curl (Free Weight):\nDimensions: (L X W X H) 1270X1430X1330mm.\nMain Frame:?114x3 mm thick M.S pipe in bending design and subordinate tube is of ?88x3 mm large thickness M.S pipe. Plate holder frame, front abdomen rest frame, knee rest frame and leg movement frame made in bending design using 088x3mm M.S pipe\nHandle: ?25 mm round M.S bright bar.\nLeg movement frame made of ?88 x3mm thick MS pipe.\nAll remaining frame is made by ?88 x3mm thick MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: lubricated high grade 6305 '2RS' steel ball bearing\nBearing: Lubricated high grade 'ZZ' steel ball bearing.\nBase plate :is OD 166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes : ? 75mm OD seamless pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nFoam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.\nHardware :All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum /pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
52 Leg Extension (Free Weight):\nDimensions: (L X W X H) 1490X1500X1090mm.\nMain Frame:?114 x3 mm thick M.S pipe in bending design and subordinate tube is of ?88x3mm large thickness M.S pipe.00\nLeg movement frame: is made of ?88 *3 mm and ?48 x3mm thick Pipe thick Pipe in bending design and ?25 mm round M.S bright bar.\nAll remaining frame is made by 076 x3mm thick MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 048 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID*48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 '2RS' steel ball bearing \nBase plate :is OD 166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes : ? 75mm OD seamless pipe. Weight plate mounting pipe is of ?48 mm MS pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nFoam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.\nHardware: All hardware's uses button heads bolts and nuts made up of high tensile steel. \nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYLON/HDPE material.\nLaser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior \nsurfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
53 45 Degree leg press (Free Weight):\n Dimensions: (L X W X H) 2480X1240X1450mm.\nMain Frame:?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Trolley movement main frame made in bending using ?114 x3 mm thick M.S pipe and Bottom frame in bending design made by ?88x3mm thickness M.S pipe. \nTrolley: trolley made 80x40x2.5mm thick capsule tube. Trolley guide bar made up of M.S 25 OD solid bright bar duly hard chrome plated. Trolley footrest made up of 5mm thick checkered plate duly powder coated finally covered 5mm thick heavy-duty rubber sheet. Trolley holder and safety rod is made up of 25mm OD solid M.S bright bar.\nBack Rest frame should be height adjustable using spring knob mechanism.\nHandle: made up of 25mm OD M.S bright bar in bending design.\nAll remaining frame is made by ?88 x3mm thick.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: lubricated high-grade linear steel ball bearing 25 ID (Inner Diameter).\nBase plate: is OD 166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes :65x65mm mild steel square bar.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nHardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.\nHand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYLON/HDPE material,\nLaser cutting-.profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting\nsubordinates with each other;\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
54 Decline Chest Press (Free Weight):\nDimensions: (L X W X H) 1240X1400X1930mm,\nMain Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Top, Bottom, Back rest and handle frame should be in bending design is made of ?88 x 3 mm thick Pipe and handle025 mm round M.S bright bar in bending design. \nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: Lubricated high grade 6305 '2RS1 steel ball bearing\nBase plate: is OD 166, ID 116, and 6 mm thick.\nPins: are made up of M.S bright bar.\nBearing bushes: ? 75mm OD seamless pipe.\nPadding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nHardware :All hardware's uses button heads bolts and nuts made up of high tensile steel. \nHand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material. \nLaser cutting; profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine: start & finish position chart stick on 5mm thick mild steel plate.\n
55 Abdominal Machine (Free Weight):\nDimensions: (L X W X H) 1210X132SX1640mm.\nMain Frame:?88 x3 mm thick M.S pipe in bending design and subordinate tube is of ?60x3mm thickness M.S pipe. Back rest frame made up of ?88 x 3 mm thick M.S pipe in bending design.\nSeat frame should have 180 Degree rotational.\nHandle: is made of ?25 mm round M.S bright bar.\nAll remaining frame is made by ? 88 x3mm thick and ?60 x3mm thick MS pipe.\nWeight plates: Rubberized moulding round weight plates are used.\nWeight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.\nBearing: lubricated high grade 6305 'IRS' steel ball bearing\nPins: are made up of M.S bright bar.\nBearing bushes: ? 75mm OD seamless pipe.\nWeight plate mounting pipe is of 048 mm MS pipe.\nPadding and Cushion; Seats and pads are made up of 6 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.\nFoam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.\nHardware : All hardware's uses button heads bolts and nuts made up of high tensile steel.\nHand grips: Hand grips is used on handles wherever necessary made up of high-quality\nrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long\nendurance.\nSpring knob: mechanism is used for seat height adjustment.\nClosing caps: All open ends should close using closing caps of PP/NYLON/HDPE material.\n Laser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.\nRubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handle for noise less operations.\nPowders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.\nSafety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.\n
56 OTHER FITNESS GYM EQUIPMENTS
57 E-Z BAR 28 MM DIA WITH COLLORS (chrome plated)
58 E-Z BAR 50 MM DIA WITH COLLORS (chrome plated)
59 BARBELL BARS 28 MM DIA WITH COLLORS (chrome plated)
60 BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated)
61 M.S HARD CHROME PLATED WEIGHT PLATES.
62 RUBBERIZED WEIGHT PLATE
63 M.S HARD CHROME PLATED DUMBBELLS.
64 RUBBERIZED DUMBBELLS
65 GYM MAT (GYMNASIUM MAT)
66 MIRROR FOR GYMNASIUMS
67 TRADEMILL - Commercial
68 TRADEMILL-Semi Commercial
69 ELLIPTICALS-Commercial
70 UPRIGHT BIKES - Commercial
71 RECUMBENT BIKE - Commercial
72 SPINE BIKE - Commercial
73 EXER CYCLE
74 IMPORTED DUAL MULTI - GYM UNIT
75 4 Station Dual Multi Gym\nChest Press Cum Shoulder Press-80 Kg \nLat Cum Rowing - 80 kg\nLeg Extension Cum Prone Leg Curl - 75 Kg\nBicep Cum Triceps - 75 Kg\n
76 IMPORTED SERIES SINGLE STATION
77 WRIST CONDITIONER - 50 Kg
78 PREACHER CURL MACHINE - 60 Kg
79 LAT PULL DOWN - 80 Kg
80 CHEST PRESS - 80 Kg
81 MULTI FUNCTIONAL TRAINER - 120 Kg
82 PEC FLY WITH REAR PELT - 80Kg
83 SHOULDER PRESS - 70 Kg
84 LEG EXTENSION & LEG CURL COMBO - 80 Kg
85 MULTI HIP- 60 Kg
86 ASSISTED CHIN-UP - 75 Kg
87 TRICEP
88 BENCH PRESS BENCH
89 INCLINE BENCH
90 DECLINE BENCH
91 ADJUSTABLE BENCH
92 45 DEGREE LEG PRESS 7
93 HACK WITH LEG PRESS
94 SMITH MACHINE
95 RACK FOR 20 DUMBELLS WITH BAR RACK
96 WEIGHT PLATE RACK
97 POWER CAGE
98 IMPORTED OTHER FITNESS EQUIPMENT - ANY INTERNATIONAL BRAND
99 E-Z BAR 50 MM DIA WITH COLLORS (chrome plated)
100 E-Z BAR 25 MM DIA WITH COLLORS (chrome plated)
101 BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated)
102 BARBELL BARS 25 MM DIA WITH COLLORS (chrome plated)
103 M.S HARD CHROME PLATED WEIGHT PLATES.
104 RUBBERIZED WEIGHT PLATE
105 M.S HARD CHROME PLATED DUMBBELLS.
106 RUBBERIZED DUMBBELLS
107 GYM MAT (GYMNASIUM MAT)
108 TRADEMILL - Commercial
109 TRADEMILL - Semi Commercial
110 ELLIPTICALS - Commercial
111 UPRIGHT BIKES - Commercial
112 RECUMBENT BIKE - Commercial
113 SPINE BIKE - Commercial
114 OUTDOOR GYM (ARTIFICIAL WOOD COVER)
115 Air Walker\nProviding and fixing Air Walker manufactured by combination of mild steel and alt-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1210X390X1264mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm,100 X 100 mm inner area to accommodate square tube shape which is Completely molded in one single piece.\n2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Paddle- 042mm OD "B" class Gl pipe.\n4) Handle Demountable Type - ? 33mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for Demountable system\n5) Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick used as support.\n6) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. material.\n7) Main Frame Bottom protective cover -Decent Design PP/HDPE material.\n8) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from Stainless Steel Press fit or PP/HDPE.\n9) Bracket- 8mm thick laser profile is use to support paddle frame.\n10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Square 8mm thickness is welded on top. Torque steel is used to support center pipe. Height of stool is 3ft.\n11) Foundation plate -M.S. 250X250mm Square with 8mm thick.\n12) Foundation stool is embedded in C.C. stock below ground level.\n13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n14) Hardware Nut & Bolts- High Tensile steel Zink Plated\n15) Pin's - ? 25mm M.S./stainless steel specification 304 duly machined as per size.\n16) Circlips- A 24 circlips are used for assembly.\n17) Bearing bushes- ? 60mm OD and - 0 50mm OD seamless pipe.\n18) Surface Coating-best quality of powder coating 80 to 100 micron.\n19) Safety Instructions and Exercise chart- Made from Aluminum/stainless steel stick-on product.\n
116 Chest Press Double\nProviding and fixing 'Chest Press Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H}= 1975X720X1920mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main center pipe- - 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Remaining frame- made up of ?48mmOD 60 OD "B" Class G.i. pipe.\n4) Handle - Made up of ? 48mm OD "B" Class G.I. pipe,\n5) Connecting Link - made up of ?48mmOD "B" Class G.I. pipe.\n6) Seat & back rest - 330 X 300X 2mm thick M.S. seat with corner fillet for safety.\n7) Handle is connected with frame by 8 MM laser cutting MS profile\n8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material\n9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n10) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS\n11) Bearing bush Closing cap’s-PP/SS/HDPE material.\n12) Foundation stool: Made from main pipe 91x91x2mm mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n13) Foundation plate -M.S. 250X250mm Square with 8mm thick.\n14) Foundation stool is embedded in C.C. stock belowground level\n15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n16) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n17) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n18) Grips • High quality rubber ? 40mm OD.\n19) Cirdips-A 24 circlips are used for assembly.\n20) Coating - best quality of powder coating 80 to 100 micron.\n21) Safety Instructions and Exercise chart - Made From Aluminum/stainless-steel stick-on product\n
117 Standing-Seating Twister\nProviding and fixing 'Standing-Seating Twister' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1530X1525X1450mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Seat plate support - ? 60 mm OD "B" Class G.l Pipe.\n4) Seating Footrest ring- ? 33 mm OD "B" Class G.l Pipe made by rolling.\n5) Seating ring support -? 25 mm OD "B" Class G.l Pipe.\n6) Bottom Seat and Standing Support -Made From 100X50X2.5mm Pipe Attached 5 mm thick MS Plate for Demountable system\n7) Standing plate- ? 300mm OD X 10mm thick M.S. plate.\n8) Seating plate-? 300mm OD X 10mm thick M.S. plate.\n9) Handle- ?33mm "6" Class G.l. Pipe made by rolling\n10) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n11) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n12) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n13) Bearing bush Closing cap's- PP/SS/HDPE material\n14) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n15) Foundation plate -M.S. 250X250mm Square with 8mm thick.\n16) Foundation stool is embedded in C.C. stock belowground level\n17) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n18) pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n19) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n20) Cirdips-A 24 circlips are used for assembly.\n21) Coating - best quality of powder coating 80 to 100 micron.\n22) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product\n
118 Horse Rider\nProviding and fixing 'Horse Rider' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1150X420X1425mm.\n1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Remaining frame- made by ? 48 mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for demountable system\n4) Seat frame - Is made by ? 48 mm OD "B" class Gl pipe. Duly Bend Attached 5 mm thick MS Plate for Demountable system\n5) Centre Link - made up of ? 48mm OD "B" Class G.l. pipe.\n6) Handle - ? 33 mm OD "B” Class Gl pipe.\n7) Link - made up of ?48mm OD "B" Class G.l. pipe. Angle between link and ground position is 10-20 degree\n8) Paddle vertical support - ? 60 mm OD "8" Class Gl pipe.\n9) Foot Rest pipe - ? 33 mm OD "B" Class Gl pipe.\n10) Support frame -10 mm thick MS flat is used. Attached 5 mm thick MS Plate for Demountable system\n11) Seat – 5mm thick MS laser cutting profile is used.\n12) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n13) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n14) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n15) Bearing bush Closing cap's- PP/SS/HDPE material\n16) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft,\n17) Foundation plate -M.S 250X250mm Square With 8mm thick.\n18) Foundation stool is embedded in C.C. stock below ground level\n19) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n20) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n21) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n22) Grips - High quality rubber 0 40mm OD.\n23) Circlips-A 24 circlips are used for assembly.\n24) Coating - best quality of powder coating 80 to 100 micron.\n25) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product.\n
119 Leg Press Double\nProviding and fixing 'Leg Press Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)« 1696X415X1520mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame Cover-Fully Top to Bottom Covered with all-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One-piece\n3) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure\n4) Seat Frame Top support- Made by 0 48mm OD "B" Class Gl pipe, Attached 5 mm thick MS Plate for Demountable system.\n5) Foot rest support pipe-Made by ? 48mm OD "B” Class Gl pipe. Attached 5mm thick MS Plate for Demountable system\n6) Seat Frame Main Pipe - Made by? 60mm OD "B" Class Gl pipe. Attached 10mm thick MS laser Profile Plate for Demountable system\n7) Seat frame - ? 42mm OD "B” Class GI Pipe. Duly Bend\n8) Leg Press back rest should be angled in 120-130 degree\n9) Foot rest- cast iron 124X296X5mmthick and M.S plate of 2mm thick use to support it.\n10) Seat-330X300X2mm thick M.S. seat with corner fillet for safety.\n11) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n12) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n13) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n14) Bearing bush Closing cap's- PP/SS/HDPE material\n15) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n16) Foundation plate-M.S. 250X250mm Square With 8mm thick.\n17) Foundation stool is embedded in C.C. stock belowground level\n18) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing.\n19) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n20) Bearing bushes - ? 60mm OD and - ?50mm OD seamless pipe.\n21) Grips - High quality rubber ? 40mm OD.\n22) Cirdips-A 24 circlips are used for assembly\n23) Coating - best quality of powder coating 80 to 100 micron.\n24) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product.\n
120 Rower\n\nProviding and fixing 'Rower' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\n\nDimensions: (L X W X H) = 1492X92SX1030mm.\n\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n\n2) Top and Bottom Main Frame - Consist 91X91x2.5mm Thickness Square tube get maximum internal strength to structure\n\n3) Foot Rest Support-Made by ?60mm OD "B" Class G.l. pipe. Attached 5 mm thick MS Plate for Demountable system \n\n4) Handle- ?33mm OD "B" Class G.l pipe. Duly Bend. Angle between handle and horizontal surface Is 75-80 degree.\n5) All Connecting Link - Made By ?48mm OD "B" Class G.l. pipe.\n\n6) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety.\n\n7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n\n8) Main Frame Bottom protective cover - Decent Design Size PP/HDPE material.\n\n9) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n\n10) Bearing bush Closing cap's- PP/SS/HDPE material\n\n11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n\n12) Foundation plate -M.S. 2S0X250mm Square With 8mm thick.\n\n13) Foundation stool is embedded in C.C. stock below ground level\n\n14) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n\n15) Pin's - ? 25mm M.S./stainless steel specification 304 duly machined as per size\n\n16) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n\n17) Grips - High quality rubber 0 40mm OD.\n\n18) Cirdips-A 24 circlips are used for assembly.\n\n19) Coating • best quality of powder coating 80 to 100 micron.\n\n20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product.\n
121 Seated Puller Double\n\nProviding and fixing 'Seated Puller Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\n\nDimensions: (L X W X H) = 197SX680X1975mm.\n\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure\n\n3) Seat Frame Top support* Made by ? 48mm OD "B" Class G! pipe. Attached 5 mm thick MS Plate For Demountable system\n4) Seat Main Frame- Made by ? 48mm OD "B" Class Gl pipe. Attached With Handle Profile\n\n5) Handle Profile- Made By M.S. 10 mm Thick Laser cutting Profile\n\n6) Handle • Made by 048 mm OD "B" Class G.l. pipe.\n\n7) Connected Link-Made by by 048 mm OD "B" Class G.l. pipe\n\n8) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety.\n\n9) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n\n10) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n\n11) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n\n12) Bearing bush Closing cap's-PP/SS/HDPE material\n\n13) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft\n14) Foundation plate-M.S 250X250mm Square With 8mm thick.\n15) Foundation stool is embedded in C.C. stock below ground level\n16) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n17) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n18) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n19) Grips - High quality rubber ? 40mm OD.\n20) Circlips-A 24 circlips are used for assembly.\n21) Coating - best quality of powder coating 80 to 100 micron.\n22) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product\n
122 Shoulder Builder Double\nProviding and fixing 'Shoulder Builder Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (t X W X H)= 910X578X1520mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure\n3) Ring Fitting Top support- Made by 0 48mm OD "B" Class Gi pipe. Attached 5 mm thick MS Plate For Demountable system\n4) Shoulder Builder ring - ?33 mm OD “B" Class G.l Pipe.\n5) Shoulder ring And Bearing Bush support Pipe-025 mm OD "B" Class G.l Pipe.\n6) Nylon knob with Bearing - Is fixed on shoulder ring pipe for rotating purpose, 2 set to be fixed in a position for kids and adults.\n7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/M5. Material\n8) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n9) Nut & Bolts Closing Caps- All Nut 8i Bolt Closing caps made from PP/HDPE/SS\n10) Bearing bush Closing cap's- PP/SS/HDPE material\n11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n12) Foundation plate -M. S 250X250mm Square With 8mm thick.\n13) Foundation stool is embedded in C.C. stock below ground level\n14) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing.\n15) Pin's-? 25mm M.S./stainless steel specification 304 duly machined as per size\n16) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n17) Grips - High quality rubber ? 40mm OD.\n18) Circlips-A 24 circlips are used for assembly.\n19) Coating - best quality of powder coating 80-100 micron.\n20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product\n
123 Sit Up Board\nProviding and fixing 'Sit Up Board' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1590X480X680mm.\n1) Main Frame Cover - Completely covered top to bottom with all season artificial wood, outer size 120x120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to the structure.\n3) Back rest frame made from ?33 OD "B" Class G.l. pipe in bending design and finally covered with 5mm thick mild steel checkered plate. Back rest frame should have adjustment mechanism for 3 different positions.\n4) Top and Bottom Leg Support-? 60mm OD "B" Class G.i Pipe,\n5) Main Frame Bottom Support-? 60mm OD "B" Class G.i Pipe\n6) Remaining Frame - ? 60 mm OD "B" Class G.l pipe.\n7) Backrest Seat- made by All-season Artificial Wood Eco Friendly look\n8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n9) Foundation plate -M. S 250X250mm Square With 8mm thick.\n10) Foundation stool is embedded in C.C. stock below ground level\n11) Coating - best quality of powder coating 80-100 micron.\n12) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product\n
124 Sky Walker\nProviding and fixing 'Sky Walker' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions(L X W X H)= 1740X920X1730mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame Cover-Fully Top To Bottom covered With All-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One- piece .\n3) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n4) Paddle vertical support - ?48mm OD "B" Class Gl pipe.\n5) Handle- ?33mm OD "B" Class GI pipe dually bending design.\n6) Leg movement frame- 50mm X50mm X2mm thick square pipe.\n7) Footrest - cast Iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it.\n8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n11) Bearing bush Closing cap's- PP/SS/HDPE material.\n12) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n13) Foundation plate -M.S 2S0X250mm Square With 8mm thick.\n14) Foundation stool is embedded in C.C. stock below ground level\n15) Bearing- 6005 use Is permanent lubricated reputed brands or self-lubricated imported bushing.\n16) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n17) Bearing bushes - ? 60mm OD and ? 50mm OD seamless pipe.\n18) Grips - High quality rubber ? 40mm OD.\n19) Circlips-A 24 circlips are used for assembly.\n20) Coating - best quality of powder coating 80-100 micron.\n21) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick\n
125 Surf Board\nProviding and fixing 'Surf Board' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1110X900X1410mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure.\n3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube\n4) Handle- ? 42mm and ? 33 OD “B" Class Gl pipe.. Attached S mm thick MS Plate For Demountable system\n5) Leg movement frame- ? 48mm OD "B” Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system\n6) Footrest - cast iron 325X270X8mm thick and M.S. plate of 250x200x2mm thick use for to support it.\n7) Bracket- 8mm thick laser profile is use to support leg movement frame.\n8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n11) Bearing bush Closing cap's-PP/SS/HDPE material\n12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X25Qmm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n13) Foundation plate -M.S 250X250mm Square with 8mm thick.\n14) Foundation stool is embedded in C.C. stock below ground level\n15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n16) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n17) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe.\n18) Grips - High quality rubber ? 40mm OD.\n19) Cirdips-A 24 circlips are used for assembly.\n20) Coating - best quality of powder coating 80-100 micron.\n21) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product.\n
126 Exer Cycle\n\nProviding and fixing 'Exer Cycle' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\n\nDimensions: (L X W X H)= 1370X720X1210mm.\n\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n\n3) Handle- ?33mm OD "B" Class 61 Round pipe dully bending design. Attached 5 mm thick MS Plate For Demountable system\n4) Seat- 5mm thick MS laser cutting profile is used.\n\n5) Paddle-100mmX50mm capsule pipe and 40x16 mm MS flat is use for connecting the paddle and shaft.\n\n6) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n\n7) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n\n8) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS\n\n9) Bearing bush Closing cap's- PP/SS/HDPE material\n\n10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n\n11) Foundation plate -M.S 250X250mm Square With 8mm thick.\n\n12) Foundation stool is embedded in C.C. stock below ground level\n\n13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n\n14) Pin’s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n\n15) Bearing bushes - ? 60mm OD and ? 50mm OD seamless pipe.\n\n16) Grips-High quality rubber 040mm OD.\n\n17) Circlips-A 24 circlips are used for assembly.\n\n18) Coating - best quality of powder coating 80-100 micron.\n\n19) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product\n
127 Multi-Functional Trainer\n\nProviding and fixing 'Multi-Functional Trainer' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\n\nDimensions: (LX W X H)= 1840X490X1290mm.\n\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube gets maximum internal strength to structure.\n3) Back support- Made by All-season Artificial Wood Eco Friendly Green look\n\n4) Leg riser support pipe- 80X40X2.Smm thick rectangle pipe. Attached 5 mm thick MS Plate For Demountable system\n5) Handle- Leg Raiser Hand Holding Pipe And Dipping Handle Made by 0 33mm OD "B" Class G.l. Pipe. Duly Bend\n6) Chin-up support - ? 60mm OD "B" Class G.l. Pipe. Attached 5 mm thick MS Plate For Demountable system\n7) Chin-up handle - ? 2Smm OD MS bar with knurling.\n\n8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material\n\n9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n\n10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n\n11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S Plate of 250X250mm Squire 8mm thickness is welded top Square tube of 30x30x2 mm is use for to support center pipe.Height of stool is 3ft.\n12) Foundation plate -M.S 250X250mm Square With 8mm thick.\n\n13) Foundation stool Is embedded in C.C. stock below ground level\n14) Grips - High quality rubber ?40mm OD.\n15) Coating - best quality of powder coating 80-100 micron.\n16) Safety instructions and Exercise chart - Made From Aluminum/stainless steel stick on product\n
128 Bench with Fixed Weight\nProviding and fixing 'Bench with Fixed Weight' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions (L X W X H)= 1420X670X2620mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Backrest frame-Made from ?42OD"B" Class mm G.l. pipe.\n4) Bottom support pipe - 50X25X2.5mm thick rectangle pipe.\n5) Fixed weight- made from SS 202 Stainless Steel tube and 5kg casting round plate is attached at both end of bar.\n6) Backrest Seat-made By made by all-season Artificial Wood Eco Friendly Green look\n7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n8) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n9) Nut & Bolts Closing Caps* All Nut & Bolt Closing caps made from PP/HDPE/SS\n10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n11) Foundation plate -M.S 250X250mm Square with 8mm thick.\n12) Foundation stool is embedded in C.C. stock below ground level\n13) Coating - best quality of powder coating 80-100 micron.\n14) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product\n
129 Shoulder Exercise Spinner\nProviding and fixing 'Shoulder Exercise Spinner* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions (L X W X H)= 1230X1210X1310mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure\n3) Ring Fitting Top support- Made by ? 48mm OD "B" Class Gl pipe. Duly Bend attached 5 mm thick MS Plate For Demountable system.\n4) Spinner ring - ?33 mm OD "B" Class G.l Pipe.\n5) Spinner ring And Bearing Bush support Pipe - ?25 mm OD "B" Class G.l Pipe.\n6) Shoulder Ring size - Front Part DIA 450mm and Rear Part size is DIA 600mm.\n7) Nylon knob with Bearing - is fixed on shoulder ring pipe for rotating purpose.\n8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material.\n9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS.\n11) Bearing bush Closing cap's- PP/SS/HDPE material\n12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n13) Foundation plate-M.S 250X2S0mm Square With 8mm thick.\n14) Foundation stool is embedded in C.C. stock below ground level\n15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.\n16) Pin's - ? 25mm M.S./ stainless steel specification 304 duly machined as per size\n17) Bearing bushes - ? 60mm OD and - ?50mm OD seamless pipe.\n18) Circlips-A 24 circlips are used for assembly.\n19) Coating - best quality of powder coating 80-100 micron.\n20) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product.\n
130 Double Bar\nProviding and fixing 'Double Bar' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H) 1870X540X2010mm.\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Double Bar Hand Rail Pipe- ?42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system\n4) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n5) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is .3ft.\n8) Foundation plate -M.S 250X250mm Square With 8mm thick.\n9) Foundation stool is embedded in C.C. stock below ground level\n10) Coating - best quality of powder coating 80-100 micron.\n11) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product\n
131 Horizontal Bar\nProviding and fixing 'Horizontal Bar* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H) 3580X2610mm.\n1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which Is completely molded in one single piece.\n2) Main Frame – Consist 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure.\n3) Horizontal Barb Hand Rail Pipe- 0 42mm 00 "B” Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system\n4) Footrest - Made By 0 42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system M.S. plate of 150x100x2mm thick use for to support it.\n5) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n6) Main Frame Bottom protective cover - Decent Design PP/HDPE material.\n7) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n9) Foundation plate made up of M.S 250X2S0mm square With 8mm thick.\n10) Total 03 foundation stools are used which are connected to each other in single piece.\n11) Foundation stool is embedded in C.C. stock below ground level\n12) Coating - best quality of powder coating 80-100 micron.\n13) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product.\n
132 Push UP Bar\nProviding and fixing 'Push Up Bar' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1250X540X1530mm.\n\n1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n\n2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n\n3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube\n\n4) Push up Bar Hand Rail- ? 33 OD "B" Class Gl pipe. Duly Bend. Attached 5 mm thick MS Plate For Demountable system\n5) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n\n6) Main Frame Bottom protective cover-Decent Design PP/HDPE material.\n\n7) Nut & Bolts Closing Caps- All Nut 8t Bolt Closing caps made from PP/HDPE/SS\n\n8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n9) Foundation plate -M.S 250X2S0mm Square With 8mm thick.\n\n10) Foundation stool is embedded in C.C. stock below ground level\n\n11) Coating - best quality of powder coating 80-100 micron.\n\n12) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product\n
133 Leg Stretching\nProviding and fixing 'Leg Stretching' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.\nDimensions: (L X W X H)= 1696X415X1520mm.\n1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.\n2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.\n3) Leg Stretching Frame- Made By ? 33 OD "B" Class Gl pipe Duly Bend. Attached 5 mm thick MS Plate for Demountable system\n4) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material\n5) Main Frame Bottom protective cover-Decent Design PP/HDPE material.\n6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS\n7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.\n8) Foundation plate -M.S 250X250mm Square with 8mm thick.\n9) Foundation stool is embedded in C.C. stock below ground level\n10) Coating - best quality of powder coating 80-100 micron.\n11) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product\n
134 OUTDOOR GYM (GALVANISED IRON)
135 Air Walker
136 Chest Press Double
137 Triple Twister
138 Horse Rider
139 Leg Press Double
140 Rower
141 Seated Puller Double
142 Shoulder Builder Double
143 Sit Up Board
144 Sky Walker
145 Surf Board
146 Exer Cycle
147 Standing and Seating Twister
148 Multi -Functional Trainer
149 Bench with Fixed Weight
150 Bench with Fixed Dumbbells
151 Back Extension
152 Chest Press Single
153 Instruction Board
154 Double Twister Standing
155 Push Up Bar
156 Tai chi Spinner
157 Three in One Combo Unit Chest press/Air walker/Seated Puller.
158 Four in One Combo Unit Seating Twister/ Standing Twister /Leg Press /Air walker.
159 Cross Trainer Single.
160 Cross Trainer Double
161 Arm and Paddle Bike.
162 Single bar.
163 Double bar.
164 STAINLESS STEEL OPEN GYM
165 M.S PLATFORM\n\n\n
166 LADDER TYPE CLIMBER (MONKEY BAR EXERCISE)\n\n
167 TRINGLE PULL UP BAR\n\n
168 LEG EXTENSION/ INCLINE SIT UPS\n\n
169 TRICEPS EXERCISE.\n
170 \nPULL UP BAR\n
171 DIPING BAR\n
172 \nPUSH UP BAR.\n
173 \nHANGING DIPS BAR\n
174 \nDISPLAY BOARD
|
