|
Contract Award For C25a-00211_Am1_Am2 - Tooling Cutter For Pet & Cet Training . Machine Reamer Dia10mm , Solid Carbide Finishing Endmill Dia 8Mm, 4 Flute X Fl 19-22Mm X Oal 57-69Mm , Counterbore Dia 5.5Mm By 10Mm , Machine Reamer Dia 5Mm , Solid Carbide Ballnose Dia 6Mm, 2 Flute , Solid Carbide Ballnose Dia 6Mm, 2 Flute , Hss Straight Shank Countersunk Drill Dia 15Mm X 90Deg (With 3 Cutting Edges) , Endmill (Roughing) Fine Pitch Dia 12Mm , Od Roughing Insert 80 Degrees To Cut Steel, P Grade. Similar Spec To Cnmg 12 04 08-Mm 2025. Able To Fit Onto Our Exisiting Toolhoolder Dclnl 2020K 12 , Endmill (Finishing)Dia 12Mm , Endmill (Roughing) Fine Pitch Dia 10Mm , Endmill (Roughing) Fine Pitch Dia 16Mm , Centre Drill, Dia 4Mm , Hss Twist Drill, Dia 9.8Mm , Z-Axis Zero Tool Pre-Setter (50Mm +/- 0.005) With Build In Dial Gauge And Magnetic Base , Deburring Tool With S-Shaped Hss Blade, Equipped With Ergonomic Rubberized Handle , Needle File Set - 6 Inch With Handle , Solid Carbide Twist Drill Dia 6.8Mm X Fl 57-62Mm X Oal 84-102Mm , Solid Carbide Endmill Dia 6Mm, 4 Flute Straight Shank, Fl 19-30Mm X Oal 50-65Mm For Cutting Harden Steel , Dia 4-5Mm Er 25 Collet Din 6499 430 E, , Dia 5-6 Er 25 Collet Din 6499 430 E, , 16.5Mm X 90Deg Countersink Counter Sink , Hss Hand Tapping Tool Metric M6 X 1 , Hss Die Set Metric M6 X 1 , Od Finishing Insert 55 Degrees To Cut Steel, P Grade. Similar Spec To Dcgx 11 T3 04-Al H10. Able To Fit Onto Our Exisiting Toolhoolder Sdjcl-2020K 11 , Shim Suitable For Turning Holder , Endmill (Finishing) Dia 24Mm, Shank 20Mm , Hss Twist Drill Dia 6.8Mm , Hss Twist Drill Dia 9.7Mm , Endmill (Roughing) Fine Pitch Dia 20Mm , Hss Hand Tap M5 X0.8(Pitch) , Twist Drill Dia 4.5,5.0,5.5,5.6,5.7,5.8, , Solid Carbide Endmill Dia 6Mm, 2 Flute X , Endmill (Finishing) Dia 16Mm , Endmill (Finishing) Dia 18Mm , Endmill (Finishing) Dia 20Mm , Slot Drill Dia 18Mm , Alloy Steel Socket Head Screws M5 X15mm , Hss Twist Drill Dia 7.2Mm , Centre Punch, Harden Tool Steel 90 Degrees , Hss Twist Drill Dia 5.6Mm , Hss Twist Drill Dia 6Mm , Hss Drill Dia 4.8Mm For Drilling Mild Steel, Flute Length 5 -6 Cm , Hss Drill Dia 5.5Mm For Drilling Mild Steel, Flute Length 5 -6 Cm , Dowel Pin Dia 5H6. Length 20Mm
|
